• 한국진공학회지
• /
• 제6권3호
• /
• pp.235-241
• /
• 1997

실리콘 기판위에 초고진공 Ionized Cluster Beam(UHV-ICB)증착법으로 적층 성장시 킨 $Y_2O_3$ 박막의 결정성 및 구조를 Backscattering Spectroscopy(BS)/channeling을 이용하여 분석하였다. 현재까지 타증착법에 의해 성장된 $Y_2O_3$박막의 channeling 최소수율은 0.8~0.95 로 거의 비정질이거나 다결정이었다. 이에 반해 UHV-ICB법으로 Si(100), Si(111) 기판 위에 적층 성장시킨 $Y_2O_3$ 박막의 channeling 최소수율은 각각 0.28, 0.25로 UHV-ICB법으로 성장 시킨 $Y_2O_3$박막이 타증착법으로 성장시킨 박막보다 상대적으로 우수한 결정성을 지니고 있 었다. 또한 실리콘 기판의 방향에 관계없이 $Y_2O_3$박막의 표면 영역이 계면 영역보다 결정성 이 좋았다. Si(111) 위에 적층 성장한 Y2O3박막은 실리콘 결정과 $0.1^{\circ}$어긋나서 (111)면으로 성장하였고, Si(100) 위에 적층 성장한 $Y_2O_3$박막은 실리콘 결정과 평행하게 double domain 구조를 지닌 (110)면으로 성장하였다. 산소공명 BS/channeling 결과 Si(111) 위에 적층 성장 한 $Y_2O_3$박막의 산소는 결정성을 갖고 있으나 Si(100) 위에 적층 성장한 $Y_2O_3$박막의 산소는 random하게 분포하고 있음을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• 태양에너지
• /
• 제17권4호
• /
• pp.3-11
• /
• 1997

다결정 실리콘에서 결정입계는 광생성된 반송자들의 재결합 중심으로 작용할 뿐 아니라 전위장벽으로 작용하여 태양전지의 변환효율을 감소시킨다. 결정입계의 영향을 줄이기 위해 열처리, 결정입계에 대한 선택적 식각, 결정입계로 함몰전극을 형성하는 방법, 다양한 전극 구조, 초박막 금속 형성 후 전극형성 등 여러가지 요소들을 조사하였다. 질소 분위기에서 $900^{\circ}C$ 전열처리, $POCl_3$ 확산을 통한 게터링, 후면전계 형성을 위한 Al 처리로 다결정 실리콘의 결함밀도를 감소시켰다. 결정입계에서의 반송자 손실을 감소시키기 위한 기판 처리로 Schimmel 식각액을 사용하였다. 이는 texturing 효과와 함께 결정입계를 선택적으로 $10{\mu}m$ 깊이로 식각하였다. 결점입계를 우선적으로 식각한 후면으로 Al을 확산하여 후면에서의 재결합 손실을 감소시켰다. 전극 핑거(grid finger) 간격이 0.4mm인 세밀한 전극 구조에 결정입계로 $0.4{\mu}m$ 깊이로 함몰전극을 추가로 형성하여 태양전지의 단락 전류 밀도가 개선되었다. 80% 이상의 광투과율을 보인 20nm 두께의 크롬 박막 형성으로 직렬 저항을 감소시켰다. 본 논문은 저가의 고효율, 지상 전력용 태양진지를 위해 결정입계에 대한 연구를 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 2000

Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.