• 폴리머
• /
• 제33권2호
• /
• pp.175-182
• /
• 2009

Isophorone diisocyanate(IPDI)를 이소시아네이트 화합물로 사용하고, poly (tetramethylene glycol)(PTMG)과 polycarbonate diol(PCD)을 혼합한 폴리올을 사용하여 선형 수분산성 폴리우레탄(WPU)을 합성하고, 이들을 필름으로 캐스팅하여 폴리카보네이트(PC) 함량 변화에 따른 기계적 특성과 염색성, 내알칼리성 변화를 분석하였다. WPU 필름에 PC 성분의 함량이 증가함에 따라 인장강도는 증가하고 파단신도는 감소하였으며, 분산염료에 대한 겉보기 염착량이 감소하였지만, 내알칼리성은 영향이 없었다. 합성한 WPU 용액을 PET 섬유 인공피혁용 함침가공제로 사용한 결과, PTMG 만을 폴리올로 사용한 WPU 수지로 처리한 경우보다 인공괴혁의 마찰견뢰도, 일광견뢰도, 내세탁성 등 염색견뢰도를 크게 증가시킬 수 있었다.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.88-95
• /
• 2005

Melt blending of Bisphenol A polycarbonate (PC) and poly(trimethylene terephthalate) (PTT) was carried out over the entire composition range. The mixing time was varied up to 90 min. The resulting samples were analyzed by FT-IR, DSC, XRD, DMTA, $^{1}H NMR$, and SEM. The process of transesterification between the two polymers and their resulting compatibilization were observed. The behaviors of the PTT-rich and PC-rich blends were different and an equilibrium was found to exist. Peculiar behavior, which was different from that of the PTT-rich and PC-rich blends, was exhibited by the 50/50 (PTT/PC) blend.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.32-36
• /
• 2014

This study analyzes performance-weight ratio of polycarbonate(PC) pigpen and steel pigpen. The finite element models using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the benefit of parameter study by using APDL. We have performed a parameter study by the width variation of PC pigpen. And we compared and analyzed the results of PC pigpen and steel pigpen. From the numerical examples, we confirmed the validity of PC pigpen.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.78-85
• /
• 2010

Creep characteristic is an important failure mechanism when evaluating engineering materials that are soft material as polymers or used as mechanical elements at high temperatures. One of the popular thermo-elastic polymers, Polycarbonate(PC) which is used broadly for engineering polymer, as it has excellent mechanical and thermal properties compared to other polymers, was studied for creep characteristic at various level of stresses and temperatures. From the experimental results, the creep limit of PC at room temperature is 85 % of tensile strength. which is higher than PE (75%)at room temperature. Also the creep limits decreased exponentially as the temperatures increased, up to 50 % of the melting point($267^{\circ}C$). Also the first and third stage among the three creep stages was non-existent nor was there any rupture failure which occurred for many metals.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1091-1096
• /
• 2003

Ion implantation in polymeric materials can induce dramatic chemical modifications, such as bond breaking, cross linking, formation of new chemical products, which have strong influences on the macroscopic properties of the materials. In this study ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate change of the optical transmittance property focusing ultraviolet ray range(200-400nm). PC was irradiated with N, Ar, Kr, Xe ions at the ion energy of 50keV and the dose range of 5 ${\times}$ 10$\^$15/, 1 ${\times}$ 10$\^$16/, 7${\times}$10$\^$16/ ions/$\textrm{cm}^2$. FT-IR, XPS, UV/Vis transmittance spectroscopy measurement technologies were employed to obtain chemical. structural properties and optical transmittance of irradiated polymer. The original PC(unimplanted) is quite transparent that it has more than 88% transmittance in the range UV-A(320∼400nm), but after ion implantation, surface colors were changed to the dark brown and the transmittance of UV ray decreased for all implantation condition, and the absorption edge was shift to visible range with increasing mass of implanted ion species and dose.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.842-849
• /
• 2009

Polycarbonate (PC)/sulfonated polystyrene (SPS) ionomer/organoclay nanocomposites were prepared by a solution intercalation process using the SPS ionomer as a compatibilizer. The effect of an organoclay on the melt crystallization behavior of the ionomer compatibilized PC were examined by differential scanning calorimetry (DSC). The melt crystallization behavior of PC was dependent on the extent of organoclay dispersion. The effect of the ionomer loading and cation size on intercalation/exfoliation efficiency of the organoclay in PC/SPS ionomer matrix was also studied using wide angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). Dispersion of the organically modified clay in the polymer matrix improved with increasing ionomer compatibilizer loadings and cation size. The SPS ionomer compatibilized PC/organoclay nanocomposite showed enhanced melt crystallization compared to the SPS ionomer/PC blend. Well dispersed organoclay nanocomposites showed better crystallization than the poorly dispersed clay nanocomposites. These nanocomposites also showed better thermal stability than the SPS ionomer/PC blend.

• 청정기술
• /
• 제13권4호
• /
• pp.251-256
• /
• 2007

폴리카보네이트(PC)의 해중합 방법에는 여러 가지방법이 보고되어 있으나, 기존의 해중합 방범에는 페놀, 톨루엔, 다이옥신 등의 독성물질 사용으로 인한 환경적인 안전문제, 알칼리의 사용으로 인한 2차 분리 문제 등이 있다. 따라서 본 연구에서는 독성물질 및 촉매를 사용하지 않고 에틸렌글리콜(EG)과 메탄올(MeOH)을 사용한 글리콜첨가분해(glycolysis)/메탄올첨가분해(methanolysis) 혼성공정에 의하여 폐PC로부터 비스페놀 A (BPA)를 회수하였다. 글리콜첨가분해는 반응온도 473.15K에서 180분에 반응평형에 도달하였고, PC의 용해과정이 이 반응의 율속단계로 나타났다. 글리콜첨가분해 이후 메탄올첨가분해를 시행함으로써 BPA수율을 높일 수 있었으며, HeOH/PC 몰비 1에서 BPA수율은 최대점을 가지고, 반응 온도가 증가할수록 수율이 증가하였다.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.114-119
• /
• 2020

The effect of a greenhouse-covering material on its indoor environment and on the characteristics of cherry tomatoes grown in it was investigated. The conventional polyethylene (PE) film on the greenhouse roof was replaced by a polycarbonate (PC) sheet, while maintaining the main structural frame intact. Color changes and the formation of water droplets on the PC surface were avoided by applying coextrusion and coating layers. When compared to the PE greenhouse, the PC greenhouse enabled increased light transmittance and thus a higher indoor temperature during both summer and winter. The thermal insulating property of the PC sheet effectively reduced the heating loss by approximately 55% during winter. The cherry tomatoes grown in the PC greenhouse exhibited superior fruit characteristics in terms of size, weight, and sugar content. The total amount of cherry tomatoes produced per unit area (1,000 ㎡) in the PC greenhouse was found to be greater by approximately 19% compared to that in the PE greenhouse.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.5-12
• /
• 2004

The enhancement of adhesion for Cu film on polycarbonate (PC) surface with the $Ar/O_2$ gas plasma treatment and dc-bias sputtering was studied. The plasma treatment with this reactive mixture changes the chemical property of PC surface into hydrophllic one, which is shown by the variation of contact angle with surface modification. The micro surface roughness that also gives the high adhesive environment is increased by the $Ar/O_2$ gas plasma treatment. These results were observed distinctly from the atomic force microscopy (AFM). The negative substrate dc-bias effect for the Cu adhesion on PC was also investifated. Accelerated $Ar^{+}$ lons in sheath area of anode bombard the bare surface of PC during initial stage of dc bias sputtering. PC substrate. therefore, has severe roughen and hydrophilic surface due to the physical etching process with more activated functional group. As dc-bias sputtering process proceeds, morphology of Cu film shows better step coverage and dense layer. The results of peel test show the evidence of superiority of bias sputtering for the adhesion between metal Cu and PC.C.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.58-64
• /
• 2014

This study analyzes performance-cost ratio of various polycarbonate(PC) pigpen. The finite element models using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the benefit of parameter study by using APDL. We have performed various parameter study of total 6 models. And we compared and analyzed the results of 6 models. From the numerical examples, we recommend model M2. Model M2 is PC pigpen with steel in PC.