• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.599-601
• /
• 2004

A new blue electroluminescent conjugated polymer, poly(BP-alt-BCV), was prepared by Hornor-Emmons polycondensation and used as a host polymer for the phosphorescent dopant, $(bsn)_2Ir(acac)$. Poly(N-vinylcarbazole) (PVK), known as a blue EL material, was also used for comparison with poly(BP-alt-BCV). Electrophosphorescence of PLEDs with these dopant/host systems was investigated in terms of luminescence, efficiency, emission color, and energy transfer.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2057-2060
• /
• 2009

Conducting poly-N-isopropylacrylamide-N-vinyl carbazole (PNI-nvc) copolymers were synthesized via in situ deposition technique by dissolving different weight percentages of N-vinyl carbazole (10, 20, 30, and 40%). The structural morphology and FT-IR studies support the interaction between PNI and N-vinyl carbazole. The temperaturedependent DC conductivity of PNI-nvc was studied within the range of 300 ${\leq}\;T\;{\leq}$ 500 K, presenting evidence for the transport properties of PNI-nvc. The DC conductivity of PNI-nvc copolymers signifies the future development of new nanocopolymers that acts as a multifunctional material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.766-769
• /
• 2002

We have seen the effects of hole-injection buffer layer in organic light-emitting diodes using copper phthalocyanine(CuPc), poly(vinylcarbazole)(PVK), and Poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate)(PEDOT:PSS) in a device structure of ITO/buffer/TPD/$Alq_3$/Al. Polymer PVK and PEDOT:PSS buffer layer was made using spin casting method and the CuPc layer was made using thermal evaporation. Current-voltage characteristics, luminance-voltage characteristics and efficiency of device were measured at room temperature with a thickness variation of buffer layer. We have obtained an improvement of the external quantum efficiency by a factor of two, four, and two and half when the CuPc, PVK, and PEDOT:PSS buffer layer are used, respectively. The enhancement of the efficiency is attributed to the improved balance of holes and elelctrons due to the use of hole-injection buffer layer. The CuPc and PEDOT:PSS layer functions as a hole-injection supporter and the PVK layer as a hole-blocking one.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1404-1407
• /
• 2005

We have fabricated organic light-emitting diodes using poly(N-vinylcarbazole)(PVK) doped with N,N'- diphenyl-N,N'-bis(3-methylphenyl)-[l,l'-biphenyl]- 4,4/-diamine (TPD) as the hole transport layer. TPD molecules act as the trapping sites in PVK and reduce the hole mobility, which can enhance the electronhole balance in the emitting layer, resulting in the enhanced device performance. We have found the optimum ratio of TPD to PVK for the EL efficiency.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.206-207
• /
• 2001

The photorefractive (PR) effect in liquid crystals sandwiched between photoconductive polymer layers was first studied by Ono et al. They reported that the PR effect vanished at steady state If there were not insulating layers because no charge trapping occurred in the photoconductive poly(N-vinylcarbazole) (PVK) layers. However we observed a significant PR effect in the polymer layered liquid crystal (PLLC) system where a liquid crystal layer doped with fullerene is sandwiched between two photoconductive PVK layers. (omitted)

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.19-25
• /
• 1999

The photoreceptor films with double layer structure were prepared by the plasma polymerization and the dip-coating method. The blocking layer was coated with A1$_2$O$_3$ on the Al substrate and the charge generation layer was formed by H$_2$ phthalocyanine (H$_2$Pc). Poly 9-Vinylcarbazole was used as a charge transport layer. H$_2$Pc film prepared by the vacuum evaporation had absorption peaks on 613.6[nm] and 694.8[nm], and H$_2$Pc film prepared by the plasma polymerization had a dull peaks between 600 and 700[nm]. The surface potential of PVCz increased with increasing the applied voltage and the thickness of PVCz. The dark decay characteristic, the light decay time and the residual time increased with increasing the thickness of PVCz. The surface charge of PVCz of 15[${\mu}{\textrm}{m}$] thickness was 134[nc/$\textrm{cm}^2$] at the surface potential of -600[V] and the charge generation efficiency of H$_2$Pc was 0.034.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.75-82
• /
• 2004

The photoluminescence and electroluminescence of poly(9-vinylcarbazole) (PVCz) containing different ratio 1.3,5-dimethly-3,5-di-tert-butyl-4,4-diphenoquinone (MBDQ), 1.3,5-diemthyl-3.5-di-tert-butyl-4,4-stylbenquinone (MBSQ) were characterized. As the contents of DQ and SQ increased, the intensity of peaks at 516 and 540nm increased in PL spectra. The results of TOF measurement were shown that the hole mobility of PVCz decreased as the ratio of DQ or SQ increased. On the other hand, the electron mobility of PVCz increased. Therefore Electron transport is more favorable than hole transport in these charge transfer complexes, due to the stronger localization of the holes. Evidence for better electron transport is the higher mobility of electrons in pure DQ or SQ compared to hole mobility in pure PVCz, and lower DQ or SQ concentration required for equivalent mobilities in the charge-transfer complexes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.351-354
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly (N- vinylcarbazole) ( PVK) , 2,5-bis (5-tert-butyl -2- benzoxaBoly) thiophene ( BBOT) , N,N-diphenyl-N,N- (3-methyphenyl) -1,1-biphenyl-4, 4-thiamine(TPD) and poly(3-hexylthiophene) (P3HT) deposited by LB(Langumuir-Boldgett) method. From the AFM(atomic force microscope) images, the monolayer containing 30% of AA(arachidic acid) showed a roughness value of 28$\AA$. In the voltage-current characteristics of ITO/Emitting layer/BBOT/LiF/A1 devices, current density much smaller than that of the spin-coated devices having a same thickness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1010-1013
• /
• 2006

To understand the exact charge carrier photogeneration properties of photoactive thin films consisting of a ${\pi}-conjugated$ polymer matrix and a triplet dopant, we prepared two types of polymer, poly(9-vinylcarbazole) (PVK) and poly[9,9-bis(2- ethylhexyl)fluorene-2,7-diyl] (PF2/6) doped with triplet emitters for organic light-emitting diodes (OLED), either iridium(III)fac-tris(2-phenylpyridine) $(Ir(ppy)_3)$ or iridium(III)bis[(4,6-fluorophenyl)- $pyridinato-N,C^2'$]picolinate (FIrpic), as thin film devices by using the conventional method. Those doped film devices, as well as pristine film devices, on ITO substrates were characterized by means of steady state photocurrent measurement for a wide spectral range.