• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.86-94
• /
• 2018

The effect of the NCO index and catalyst type on the thermal stability of poly(urethane-isocyanurate) (PUIR) foams was investigated to identify a method for enhancing the flame resistance of PUIR. PUIR foams were prepared using 4,4-diphenylmethane diisocyanate (MDI) and [(diethylene glycol)adipate]diol, which were synthesized by esterification of adipic acid and diethylene glycol. Dabco K-15, Dabco TMR-30, and Toyocat RX-5 were used as the catalysts for trimerization and gelation. The amount of urea and isocyanurate groups in PUIR was semi-quantitatively determined by normalizing their absorbance with the phenyl absorbance measured by FT-IR. The normalization data showed that Dabco TMR-30 effectively generated isocyanurate groups in PUIR. As a result, Dabco TMR-30 effectively raised the decomposition temperature and increased the 800 K and 900 K residues of the PUIR foam synthesized with an NCO index of 200.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.285-291
• /
• 1999

Effects of catalysts on network structure, hard segment length and distribution of polyurethane foams in the absence of catalysts were investigated. CFC free all MDI-based poly urethane foams were prepared from poly(ethylene adipate)glycol, 4,4'-diphenylmethane diisocyanate, and water. Amino catalysts used were 1,4-diazabicyclo[2,2,2]octane(DABCO), N, N,N',N'-tetramethyl--hexane-1,6-diamine(MR), bis(2-methylamino ethyl)ether(ET), 1,8-diazabicyclo-[5,4,0]-undecene-7(DBU). Dibutyltindilaurate(DBTL) as control was also used. Hard segment components of polyurethane foams were obtained by a selective degradation of polyester chains with 0.01N KOH-methanol solution. The PUFs with DBU catalyst contained more amount of isocyanurate components than other PUFs. On the other hand, the PUFs with ET, MR, DBTL catalysts contained more amount of allophanate and biuret component than the other PUFs.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.417-422
• /
• 2021

In this study, poly isocyanurate foam (PIR), poly urethane foam (PUR), and phenol foam (PF) of organic insulation materials were selected, and investigated using a cone calorimeter, as per ISO 5660-1. Standard materials (PMMA) were used to standardize the fire hazard assessment, and the fire risk was classified and evaluated by Chung's equations-III and IV. The fire performance index-II value of Chung's equations-II was the highest value with PF of 14.77 s²/kW. And the PUR was 0.08 s²/kW, the lowest value of fire performance index-II value. The fire growth index-II value was the lowest value with PF of 0.01 kW/s². And the PUR was 1.14 kW/s², the highest value of fire growth index-II value. The fire performance index-III (FPI-III) of Chung's equations-III had the lowest value for PUR (0.11) and the highest for PF (20.23). The PUR showed the highest value of the fire growth index-III (FGI-III) as 14.25, while the PF exhibited 0.13 regarded as the safest materials. The fire risk index-IV (FRI-IV) value of Chung's equation-IV was in the following order: PUR (130.03) >> PIR (19.13) > PMMA (1.00) > PF (0.01). Therefore, it was concluded that the fire risk associated with PF is the lowest, whereas that associated with PUR is the highest.