• Elastomers and Composites
• /
• 제45권4호
• /
• pp.256-262
• /
• 2010

[ $80\;^{\circ}C$ ] 346 bar 상태의 초임계 이산화탄소 내에서 methyl acrylate, ethyl acrylate, butyl acrylate와 glycidyl methacrylate을 중합하였다. 초임계 이산화탄소 분산매에서의 중합을 위하여 aminopropyltriethoxysilane을 사용하여 glycidyl methacrylate를 monoglycidyl ether terminated PDMS에 결합시킨 glycidyl methacrylate linked poly(dimethylsiloxane)(GMS-PDMS)를 계면활성제로 사용하였다. $CO_2$에서 합성된 Poly(alkyl acrylate)의 수율은 acrylate 단량체의 알킬기가 커질수록 낮아졌다. Poly(glycidyl methacrylate)와 poly(methyl acrylate)는 구형으로 만들어진 반면, poly(ethyl acrylate)와 poly(butyl acrylate)는 점성의 액상으로 합성되었다. Poly(glycidyl methacrylate) 입자의 수평균직경은 2.45 ${\mu}m$이며 입자 직경의 분포는 매우 좁았다. poly(methyl acrylate)의 수평균직경은 0.52 ${\mu}m$이며 입자크기는 bimodal로 분포되었다. 초임계 이산화탄소에서 중합된 poly(glycidyl methacrylate)와 poly(alkyl acrylate)들의 유리전이온도는 통상의 방법으로 중합된 poly(glycidyl methacrylate)와 poly(alkyl acrylate)의 유리전이온도보다 4~9 K 높게 측정되었다.

• 폴리머
• /
• 제25권6호
• /
• pp.848-854
• /
• 2001

무정형 고분자인 ethylene-methyl acrlate-glycidyl methacrylate 공중합체 (E-MeA-GMA)와 결정성 고분자인 poly(ethylene terephthalate) (PET)와의 블렌드에서 그라프트 반응에 따른 PET의 결정화 거동을 조사하였다. PET와 E-MeA-GMA간의 그라프트 반응 수준을 torque-rheometer, FT-IR, SEM을 이용하여 확인하였으며, 반응시간에 따른 결정화 거동 변화를 DSC와 광산란 방법을 이용하여 관찰하였다. 또한 라멜라 수준의 결정구조를 소각 X선 산란법을 이용하여 조사하였다.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.586-592
• /
• 2004

Poly(glycidyl methacrylate)-grafted polyethylene microbeads (POPM) presenting epoxy groups were prepared by radiation-induced graft polymerization of glycidyl methacrylate on the polyethylene microbead. The obtained POPM was characterized by IR spectroscopic, X-ray photoelectrons spectroscopy (XPS), scanning electron microscope (SEM), and thermal analyses. Furthermore, the abundance of epoxy groups on the POPM was determined by titration and elemental analysis after amination. The epoxy group content was calculated to be in the range 0.29-0.34 mmol/g when using the titration method, but in the range 0.53-0.59 mmol./g when using elemental analysis (EA) after amination. The lipase was immobilized to the epoxy groups of the POPM under various experi­mental conditions, including changes to the pH and the epoxy group content. The activity of the lipase-immobilized POPM was in the range from 160 to 500 unit/mg-min. The activity of the lipase-immobilized POPM increased upon increasing the epoxy group content. The lipase-immobilized POPM was characterized additionally by SEM, elec­tron spectroscopy for chemical analysis (ESCA), and EA.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.614-618
• /
• 1993

The photoacid generation efficiency of four N-hydroxyphthalimide sulfonate derivatives was studied by photo-crosslinking reaction of poly(glycidyl methacrylate) in solid film state. The relative photoacid generation efficiency was increased in the order of N-hydroxyphthalimide methanesulfonate > -toluenesulfonate > -nitrobenzenesulfonate > -dinitrobenzensulfonate, and the reaction was efficiently sensitized by benzophenone suggesting that this photoreactions is likely to proceed through its triplet excited state.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.603-608
• /
• 2005

주조된 매크로 다공성 poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) 막대를 간단한 주형 과정을 거쳐서 실험실 내 튜브모양의 주형인 크로마토그래피 칼럼($4.6{\times}100mm$)을 사용하여 자유 라디칼 중합에 의해 만들었다. 이는 에폭시 그룹이 유도된 일체형 칼럼과 황산을 이용한 에폭시드 그룹의 화학적인 변형과정을 이용하였다. 단량체 및 포로겐(세공을 생성하는 물질)의 비율, 온도 등 중합반응의 조건을 변화시켜서 세공크기를 조절하여 물질의 체류시간에 영향을 미쳤다. 본 연구에서는 주조된 일체형 칼럼을 이용하여 카페인과 트립토판을 분리하였으며, 중합원료조성이 일체형 칼럼의 효율과 선택도 그리고 분리도에 미치는 영향을 고찰하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 춘계학술발표회 논문집
• /
• pp.246-250
• /
• 1997

• Archives of Pharmacal Research
• /
• 제28권8호
• /
• pp.983-987
• /
• 2005

Hydrogels composed of glycidyl methacrylate dextran (GMD) and poly(acrylic acid, PM) were prepared by UV irradiation method for colon-specific drug delivery. GMD was synthesized by coupling of glycidyl methacrylate to dextran in the presence of 4-(N,N-dimethylamino)pyridine. GMD was photo-polymerized by ammonium peroxydisulfate as initiating system in phosphate­buffered solution (0.1 M, pH 7.4). And then, acrylic acid monomer was added and subsequently heat-polymerized by 2,2'-azobisisobutyronitrile as an initiator. The hydrogels exhibited high swelling ratio (about 20) at $37^{\circ}C$, and showed a pH-dependent swelling behavior. In addition, the swelling ratio of the hydrogel was remarkably enhanced to about 45 times in the presence of dextranase at pH 7.4. The swelling-deswelling behavior proceeded reversibly for the GMD/PM hydrogels between pH 2 and pH 7.4. Release of 5-aminosalicylic acid from the GMD/PAA hydrogels was evaluated in simulated gastrointestinal pH fluids in the absence or presence of dextranase. We concluded that the hydrogels prepared could be used as a dual-sensitive drug carrier for sequential release in gastrointestinal tract.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 춘계 학술발표회 논문집
• /
• pp.159-162
• /
• 2002

• Macromolecular Research
• /
• 제17권1호
• /
• pp.51-57
• /
• 2009

Using glycidyl methacrylate-linked poly(dimethylsiloxane), methyl methacrylate was polymerized in supercritical $CO_2$. The effects of $CO_2$ pressure, reaction time, and mixing on the yield, molecular weight, and molecular weight distribution (MWD) of the poly(methyl methacrylate) (PMMA) products were investigated. The shape, number average particle diameter, and particle size distribution (PSD) of the PMMA were characterized. Between 69 and 483 bar, the yield and molar mass of the PMMA products showed a trend of increasing with increasing $CO_2$ pressure. However, the yield leveled off at around 345 bar and the particle diameter of the PMMA increased until the pressure reached 345 bar and decreased thereafter. With increasing pressure, MWD became more uniform while PSD was unaffected. As the reaction time was extended at 207 bar, the particle diameter of PMMA decreased at $0.48{\pm}0.03%$ AIBN, but increased at 0.25% AIBN. Mixing the reactant mixture increased the PMMA yield by 18.6% and 9.3% at 138 and 207 bar, respectively.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.124-130
• /
• 2008

높은 용융강도가 요구되는 용도로 사용하기 위하여, 기능성 단량체인 glycidyl methacrylate(GMA)가 첨가된 poly(lactic acid)(PLA)를 전자선 조사로 개질하였다. GMA의 양과 전자선량을 조절하여 다양하게 개질된 PLA를 제조한 후 열적 특성, 용융 점탄성 성질 및 겔화도를 조사하였다. GMA를 첨가하지 않고 전자선 조사로만 개질한 PLA의 복합점도와 저장 탄성률은 원래의 PLA의 값보다 더 낮았고 조사량이 증가하면 더욱 낮아졌다. GMA을 0.1 phr 또는 0.3 phr로 첨가하여 개질한 PLA의 물성의 조사량에 따른 변화 경향은 GMA를 첨가하지 않고 개질한 PLA와 비슷하지만, 0.5 phr GMA를 함유하며 전자선 조사량 5 kGy로 개질된 PLA는 원래의 PLA보다 낮은 주파수 영역에서 3배나 큰 복합점도와 10배나 큰 저장탄성률을 보였다.