• Macromolecular Research
• /
• 제10권5호
• /
• pp.241-245
• /
• 2002

A new aromatic diamine monomer containing benzoxazole substituents was prepared by a multi-step synthesis starting from 1,4-dibromo-2,5-difluorobenzene. This bulky and disc-shaped monomer was polymerized with commercial dianhydride monomers to give several different poly(amic acid)s with their inherent viscosities in the range of 0.24-0.35 dL/g. The prepared polymers were soluble in typical polar aprotic solvents. Thermal imidization to the corresponding polyimides were investigated by using FT-IR, DSC and TGA.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.438-442
• /
• 2006

Novel sulfonated poly(aryl ether ketones) containing benzoxazole were directly synthesized by aromatic nucleophilic polycondensation using various ratios of 2,2'-bi[2-( 4-flurophenyl)benzoxazol-6-yl]hexafluoropropane to sodium 5,5'-carbonylbis(2-fluorobenzenesulfonate). The copolymers were soluble in polar aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide at a relatively high solid composition (>15 wt%) and formed tough, flexible and transparent membranes. The membranes exhibited a degradation temperature of above $290^{\circ}C$. The exact dissolution times of these membranes at $80^{\circ}C$ in Fenton's reagent (3 wt% $H_2O_2$ containing 2 ppm $FeSO_4$) were undetectable, confirming their excellent chemical stability in fuel cell application. The membranes showed a moderate increase in water uptake with respect to increasing temperature. The proton conductivities of the membranes were dependent on the composition and ranged from $1.10{\times}10^{-2}$ to $5.50{\times}10^{-2}Scm^{-1}$ at $80^{\circ}C$ and 95% relative humidity (RH). At $120^{\circ}C$ without externally humidified conditions, the conductivities increased above $10^{-2}Scm^{-1}$ with respect to increasing benzoxazole content, which suggested that the benzoxazole moieties contributed to the proton conduction.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Bulletin of the Korean Chemical Society
• /
• 제21권9호
• /
• pp.896-900
• /
• 2000

A study was done on the synthesis of new poly(arylene ether)s and poly(arylenesulfide) with rigid benzoxazole pendants using nucleophilic aromatic substitution reaction. As a new aromatic monomer, 1,4-bis(2-benzox-azolyl)-2,5-difluorobenzene [I] w as synthesized in three steps starting from 1,4-dibromo-2,5-difluorobenzene. A model reaction of difluoro monomer [I] with two equivalents of m-cresol or thiophenol in a typical ether con-densation reaction conditions gave very high yields ( > 93%) of the desired disubstituted product, suggesting the feasibility of polymer formation in these reaction system. Monomer[I] was polymerized with bisphenols and bisbenzenethiol in NMP using K2CO3 as base. The molecular weight of the resulting polymers, however,seemed relatively low according to their solution viscosity values ( ηinh = 0.15-0.29 dL/g). The poly(arylene ether)s were soluble in several common organic solvents including chloroform, pyridine and N,N'-dimethylfor-mamide. The poly(arylene sulfide) was, however, ony soluble in strong acids like sulfuric acid and trifluoro-acetic acid. The glass transition temperatures were found to be 175-215 $^{\circ}C.$ These polymers were stable up to 380-420 $^{\circ}C$ in both nitrogen and air, as determined by the temperature that a significant weight loss began to appear on TGA.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.138-145
• /
• 2015

A series of wholly aromatic poly(hydroxyamide)s(PHAs), containing varying amounts of 2,6-dimethylphenoxy group and quinoxaline ring in the main chain, were synthesized by a direct polycondensation method. The inherent viscosities of the PHAs in either DMAc or DMAc/LiCl solution at $35^{\circ}C$ were found to be in the range of 1.02~1.90 dL/g. In the solubility study, we observed that PHA 1, PHA 2, and PHA 3 were dissolved in aprotic solvents such as DMAc, NMP, DMF, and DMSO with LiCl on heating; however, PHA 4, PHA 5, and PHA 6 could be dissolved in aprotic solvents on heating without LiCl. For poly(benzoxazole)s(PBOs), the 10% and maximum weight loss temperatures were in the range of $582{\sim}622^{\circ}C$ and $630{\sim}659^{\circ}C$, respectively. Residues of PBOs at $900^{\circ}C$ were found to be relatively high, which were in the range of 65.3~70.8%.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.141-149
• /
• 2018

A series of aromatic poly(o-hydroxyamide)s (PHAs) were synthesized by the direct polycondensation reaction of 4,4′-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4′-(2,3-pyridinedioxy) dibenzoic acid with bis(o-aminophenol) including 2,2-bis-(amino-4-hydroxyphenyl)hexafluoropropane. The PHAs exhibited inherent viscosities in the range of 0.17-0.35 dL/g at $35^{\circ}C$ in a DMAc solution. These polymers showed low inherent viscosities and yielded brittle films. All the PHAs showed excellent solubility in aprotic solvents such as DMAc, DMSO, NMP, and DMF at room temperature and in less polar solvents such as pyridine and THF. However, all the PBOs were only partially soluble in $H_2SO_4$. The PBOs exhibited 10% weight loss at temperatures in the range of $537-551^{\circ}C$. The maximum weight loss temperature increased with an increase in the content of the quinoxaline-containing monomer. The residue of the PBOs showed a weight loss of 45.8-56.7% at $900^{\circ}C$ in a nitrogen atmosphere.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3279-3284
• /
• 2012

Poly(benzimidazole-co-benzoxazole)s (PBI-co-PBO) are synthesized by polycondensation reaction with 3,3'-diaminobenzidine, terephthalic acid and 3,3'-dihydroxybenzidine or 4,6-diaminoresorcinol in polyphosphoric acid (PPA). All polymer membranes are prepared by the direct casting method (in-situ fabrication). The introduction of benzoxazole units (BO units) into a polymer backbone lowers the basic property and $H_3PO_4$ doping level of the copolymer membranes, resulting in the improvement of mechanical strength. The proton conductivity of $H_3PO_4$ doped PBI-co-PBO membranes decrease as a result of adding amounts of BO units. The maximum tensile strength reaches 4.1 MPa with a 10% molar ratio of BO units in the copolymer. As a result, the $H_3PO_4$ doped PBI-co-PBO membranes could be utilized as alternative proton exchange membranes in high temperature polymer electrolyte fuel cells.

• Elastomers and Composites
• /
• 제47권4호
• /
• pp.355-363
• /
• 2012

2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane 와 방향족 디이미드-디카르복실산을 thionyl chloride, triethyl amine 및 NMP 하에서 직접 중축합하여 trifluoromethyl group을 포함하는 일련의 poly(hydroxyamide)s(PHAs)를 제조 하였다. PHAs은 $35^{\circ}C$ DMAc 용액에서 0.54-0.96 dL/g의 고유점도를 보였다. 모든 PHAs은 여러 종류의 유기용매에 쉽게 용해되었으나, PBOs은 황산에 부분적으로 용해되는 것을 제외하고, 전혀 용해되지 않았다. PHAs은 열적고리화 반응에 의해서 흡열과 함께 PBOs로 전환되었다. PHAs의 최대 중량손실온도는 $559-567^{\circ}C$의 영역을 보였고, poly(benzoxazole imide)s(PBOs)은 47-59%의 비교적 높은 char 수득율을 보였다. PBOs의 Pyrolysis Combustion Flow Calorimeter(PCFC) 결과에서 12-19 W/g의 HRR 과 2.7-3.6 kJ/g의 total HR을 보였다. PBO 1의 HRR은 PBO 3 의 HRR (19 W/g)보다 37 % 낮은 12 W/g의 가장 낮은 값을 보였다.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.175-183
• /
• 2015

A series of fluorinated aromatic poly(hydroxyamide)s (PHAs) were synthesized by direct polycondensation of diacides containing 2,6-dimethylphenoxy group and quinoxaline ring in the main chain with 2,2-bis-(3-amino-4-hydroxyphenyl) hexafluoropropane. The PHAs had relatively low inherent viscosities in the range of 0.35~0.43 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs exhibited excellent solubility in aprotic solvents such as NMP, DMAc, DMF and DMSO as well as in common organic solvents such as pyridine, THF, and m-cresol at room temperature. However, the poly(benzoxazole)s (PBOs) were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid. The PBOs showed glass transition temperatures between 233 and $284^{\circ}C$ by DSC and maximum weight loss temperatures in the range of $536-546^{\circ}C$ by TGA.

• Environmental Analysis Health and Toxicology
• /
• 제13권3_4호
• /
• pp.55-61
• /
• 1998

Glutathione-S-transferases (GSTs) detoxify electrophilic xenobiotics and reactive metabolites. Recently benzene-fused heterocycles have been shown to increase the total amount of hepatic GSTs in rats. Primarily this study aimed to determine the induction of GSTs by benzoazoles (BAs) including benzoxazole (BX), 2-methylbenzoxazole (M-BX), 2,5-dimethyl benzoxazole (D-BX), benzothiazole (BT), aminobenzothiazole (A-BT) and 2-mercaptobenzothiazole (M-BT) in rats. Hepatic cytosol and poly(A)$^+$ mRNA were prepared from rats after oral administration of BX, BT, M-BX, D-BX, A-BT and M-BT for 5 consecutive days at doses of 1 mmol/kg. Western immunoblot and northern blot analysis were conducted with rabbit anti-GST Ya, Yb$_1$, Yb$_2$, Yc antibodies and cDNA probes containing = 500 bps in the specific coding regions of Ya, Yb$_1$, Yb$_2$, Yc$_1$, and Yc$_2$, respectively. All BAs increased the amount of enzymes and mRNA levels of GSTs. BT was the most effective inducer of GSTs among the compounds examined in this study. Although A-BT and M-BT, the derivatives of BT, induced GSTs, these chemicals had lesser effect on induction of GSTs than BT. The derivatives of BX also induced less GSTs than the parent compound and the addition of methyl group to the benzene ring of BX reduced the induction of GSTs. BAs had better inductive effects on the class $\alpha$(Ya, Yc) than class $\mu$ GSTs (Yb$_1$, Yb$_2$). BAs enhanced mRNA levels of GSTs in parallel with the protein levels. These results indicate that 1) most of BAs induced various isozymes of GSTs, 2) the induction of GSTs appears to be correlated with the chemical structure of the derivatives, and 3) the expression of GST by BAs is presumably under the transcriptional regulation.