• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.92-99
• /
• 2001

High-cell-density cultivation of Ralstonia eutopha KHB 8862 by fed-batch fermentation in a 200 l pilot plant was carried out for the mass production of poly(3-hydroxybutyrate) (PHB). After 80 h of cultivation, the dry cell weight (DCW), PHB concentration, and PHB yield from fructose syrup reached 168 g/l, 74%DCW, and 0.27 (w/w), respectively, resulting in a productivity of 1.6 g of PHB/L/h. Based on these results, the PHB production cost from bacterial fermentation was analyzed and economic evaluation was performed. In the case of new investment being implemented or not, the production cost of PHB was US$ 3.15/kg and US$ 2.41/kg, respectively. PHB productivity and PHB yield on a carbon substrate were both important factors to be optimized. The increase of PHB yield on a carbon sources significantly decreased the PHB production cost but the increase in productivity had a relatively slight effect on the decrease in PHB production cost because the cost of carbon sources (37%) for PHB was larger in proportion to total cost than the depreciation cost (17%). These results suggest that the increased PHB yield from carbon sources and the development of new cheaper substrates would be more effective in decreasing PHB production cost than the increase in productivity. It was demonstrated that PHB is not in competition with consumable plastics such as PET in present market. Therefore, it is essential to lower production cost to be used as a bulk product and desirable to develop new application fields for PHB such as biomedical and cosmeceuticals.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.206-212
• /
• 1998

The effects of the pretreatment with coagulants on the recovery efficiency of poly (3-hydroxybutyrate, PHB) synthesized in Alcaligenes eutrophus were investigated. Al-base or Fe-base coagulants, and the dispersion method of 30% hypochlorite solution and chloroform were used as coagulants and PHB recovery method, respectively The recovery efficiency of PHB from the cells harvested with Al-base coagulants at the range from 0 to 1000 mg-Al/L was similar to that from cells harvested without the coagulants. At these conditions, the concentrations of residual aluminium in the purified PHB were below 250 mg-Al/kg-PHB, indicating the effect of residual aluminum on the characteristics of the purified PHB can be insignificant. When the dosage of coagulants was over 1000 mg-Al/L, the PHB recovery remarkably decreased with increasing the coagulant dosage. However, the PHB recovery could be enhanced by the use of 50% hypochlorite solution instead of 30% hypochlorite solution. Even though the reduction of PHB recovery efficiency was not found by using Fe-base coagulants, the purified PHB was stained pale red due to residual iron, These results suggest that the use of Al-base coagulants did not exert bad influence on neither PHB recovery efficiency and PHB purity.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.155-160
• /
• 2000

Pseudomnas sp. HJ-2 is capable of producing a rubber-elastic polyhydroxyalkanoate (PHA) consisting of 3- hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyheptanoate (3HHp) from heptanoic acid as the sole carbon source. The polyester produced was a blend of poly(3HB-co-3HV) and poly(3HHp). Although the mixing of poly(3HHp) fraction to poly(3HB-co-3HV) resulted in a decrease of modulus, the sole fraction of poly(3HB-co-3HV) with a high molar fraction of 3HV was shown to be an elastomer with the maximum percent strain of 740%. The biomass yield and the PHA synthesis were relatively high when the initial heptanoic acid concentration was 40 mM, and were significantly decreased when the substrate concentration exceeded 50 mM. The accumulation of PHA was stimulated by deficiency of nitrogen and phosphorus in the medium. The PHA contents and its monomeric compositions were greatly affected by pH and oxygen transfer rate. At pH 7.5, poly(3HB-~0.38% 3HV) was produced from heptanoic acid and a mixture of 95% 3HHp and 5% 3HV was produced at pH 8.0. Increased conten1 of 3HHp in the polyesters with lhe increasing oxygen transfer rate by agitation speed a1 a fixed aeration rate was observed.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.344-351
• /
• 1996

Microorganisms growing alcoholic distillery wastes were isolated from soil. Of them, the selected strain EL-9 had a capability of accumulating poly-$\beta$-hydroxybutyrate (PHB) when grown in alcoholic distillery wastes. The strain EL-9 was identified as a genus Actinobacillus based on the morphological, cultural, and biochemical characteristics. The strain EL-9 was named temporarily as Actino- bacillus sp. EL-9. The optimal temperature and pH for cell growth of Actinobacillus sp. EL-9 were 30$\circ$C and 7.0, respectively. The optimal medium compositions for cell growth comprised glucose 2%, NH$_{4}$NO$_{3}$ 0.15%, Na$_{2}$HP0$_{4}$-12H$_{2}$O 0.25%, KH$_{2}$PO$_{4}$ 0.25%, MgSO$_{4}$4-7H$_{2}$O 0.15%, FeSO$_{4}$-7H$_{2}$O 0.005%, CaCl$_{2}$-2H$_{2}$O 0.003% and trace element solution 5m/l. To investigate the optimal conditions for PHB production, two-stage culture technique was used. The result showed that the optimal conditions for PHB production are identical those for cell growth. When propionic acid was added as a cosubstrate, PHB/HV copolymer was produced.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.66-67
• /
• 2002

• KSBB Journal
• /
• v.10 no.2
• /
• pp.176-182
• /
• 1995

The environmental and physiological factors affecting the production of exopolysaccharide (Methylan) and Poly-${\beta}$-hydroxybutyrate(PHB) by Methylobacterium organophilum were investigated. The maximum PHB content was obtained at $38^{\circ}C$ whereas maximum polysaccharide concentration was $3.54g/\ell$ at $30^{\circ}C$. Optimum pH was pH 7-8 for PHB production and pH 6-7 for polysaccharide production, respectively. Under the condition of $Mo^{2+}, Mg^{2+} or Mn^{2+}$ limitation with nitrogenlimitation, the PHB accumulation was increased, whereas the polysaccharide production was decreased as compared with that of solenitrogenlimitation. Under the condition of sole K+ limitation, cell growth was significantly inhibited and no polysaccharide was produced. However, the PHB content was as high as 60% of dry cell weight. Effect of C/N ratios (methanol/ammonium) in the feeding solution was examined for the simultaneous production of polysaccharide and PHB. The higher ratio of C/N showed the lower cell growth, higher content of PHB in cells, and higher yield of polysaccharide.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.3
• /
• pp.167-171
• /
• 1995

A bacterial strain C-02 using methanol as a carbon source was isolated from Gumi Industrial Estate and selected based on its rapid growth and capability of poly-$\beta$-hydroxybutyrate accumulation. Characteristics of strain C-02 showed that it belongs to the Methylococcaceae family, Type II subgroup. Strain C-02 could incorporate valerate into the PHB chain to form 3-hydroxybutyrate and 3-hydroxyvalerate (P(3HB-co-3HV)). Among various nutrient limitation tests, the nitrogen limitation test resulted in the highest content of P(3HB-co-3HV) per dry cell weight, 50$%$. Under the nitrogen limited condition, the average molecular weight of P(3HB-co-3HV) obtained was determined to be approximately $2.8\times 10^5$ daltons.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.676-679
• /
• 2000

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.510-522
• /
• 2022

In this study, to biosynthesize PHA with properties more similar to polypropylene, a Bacillus sp. EMK-5020 strain that biosynthesized poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was isolated from soil. Bacillus sp. EMK-5020 strain biosynthesized PHBV containing 1.3% 3-hydroxyvalerate (3HV) using reducing sugar contained in Makgeolli lees enzymatic hydrolysate (MLEH) as a single carbon source. As the amount of propionic acid, which was added as a second carbon source, increased, the content of 3HV also increased. PHBV containing up to 48.6% of 3HV was synthesized when 1.0 g/l of propionic acid was added. Based on these results, the strain was cultured for 72 hr in a 3 l fermenter using reducing sugar in MLEH (20 g/l) and propionic acid (1 g/l) as the main and secondary carbon sources, respectively. As a result, 6.4 g/l DCW and 50 wt% of PHBV (MLEH-PHBV) containing 8.9% 3HV were biosynthesized. Through gel permeation chromatography and thermogravimetric analysis, it was confirmed that the average molecular weight and the decomposition temperature of MLEH-PHBV were 152 kDa and 273℃, respectively. In conclusion, the Bacillus sp. EMK-5020 strain could biosynthesize PHBV containing various 3HV fractions when MLEH and propionic acid were used as carbon sources, and PHBV-MLEH containing 8.9% 3HV was confirmed to have higher thermal stability than standard PHBV (8% 3HV).

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.352-356
• /
• 1996

Alcoholic distillery wastes are utilized as dual purposes to produce PHB in lower production cost and to reduce the amount of waste to be treated. In this study, various attempts were made to increase PHB production under various conditions by Actinobacillus sp. EL-9 in a shaker culture. The addition of glucose, NH$_{4}$NO$_{3}$ to alcoholic distillery wastes slightly promoted cell mass and PHB production. Enzyme hydrolysis of alcoholic distillery wastes increased the production of PHB than that of untreated waste and acid hydrolysis treatment. The PHB weight in alcoholic distillery wastes was 1.91 g/l. Fermentation process of PHB production reduced the amount of COD value up to 54%, which reduced organic loading rate and capacity of activated sludge system.