• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.247-248
• /
• 2003

우리 나라의 도시ㆍ산업단지 지역의 대기오염은 심각한 수준으로, 특히 미세먼지로 인한 대기오염은 스모그 등 심미적인 문제뿐만 아니라 호흡성 분진으로 인한 건강 위해성 측면에서 철저한 오염원 관리가 필요하다. 현재 우리 나라의 먼지 배출량을 보면 비산먼지의 배출량이 연소과정에서 발생되는 미세먼지보다도 큰 것으로 추정되며, 특히 이 중에서 자동차의 도로주행시 발생되는 먼지가 비산먼지 발생량 중 90 %이상을 차지하고 있는 것으로 추정된다(국립환경연구원, 2002). 차량운행으로 인하여 포장도로에서 발생하는 비산먼지 배출량은 도로 표면의 단위면적 당 silt(75$\mu\textrm{m}$이하의 입자)량, 즉 silt loading에 의해 좌우되는데 silt loading은 도시ㆍ산업단지의 체계적인 개발계획 및 대기질 관리정책을 수립에 없어서는 안 될 중요한 자료이다. (중략)

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.161-167
• /
• 2001

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.116-125
• /
• 2003

Predictions of stream water quality require both estimation of pollutant loading from different sources and simulation of water quality processes in the stream. Nonpoint source pollution models are often employed for estimating pollutant loading in rural watersheds. In this study, a conjunctive application of SWAT model and WASP model was made and evaluated for its applicability based on the simulation results. Runoff and nutrient loading obtained from the SWAT model were used for generating input data for WASP model. The results showed that the simulated runoff was in good agreement with the observed data and indicated reasonable applicability. Loading for the water quality parameters predicted by WASP model also showed a reasonable agreement with the observed data. It is expected that stream water quality could be predicted by the coupled application of the two models, SWAT and WASP, in rural watersheds.

• 한국농공학회논문집
• /
• 제58권4호
• /
• pp.67-74
• /
• 2016

Load Duration Curve (LDC) can be used as a method for load management of point and non-point pollution source because the LDC easily assesses the water quality corresponding to hydrological changes in a watershed. Recently, the application of LDC to total pollution load management is a growing interest in Korea. In this regard, A desktop-based LDC assessment system was developed in this study to provide convenience to users in water quality evaluation. The developed system can simply produce the LDC by using streamflow and water quality data involved in its database. Also, The system can quantitatively inform the success or failure of the achievement for a target water quality at monthly scale. Furthermore, seasonal water quality and point/non-point pollution load in a watershed can be estimated by this system. We expect that the developed system will contribute to establish local and national policies regarding water management and total pollution load management because of its advantages such as the pollution tracking investigation and the analysis of water quality and pollution loading amount in an ungauged watershed.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.580-586
• /
• 2011

Low impact development (LID) technique is recently proposed as new concept to reduce surface runoff and pollutant loading with various best management practices (BMPs). In this study, LIDMOD2, which is one of the model to evaluate LID, was applied at Mohyeon developing area to evaluate the redcution of annual runoff and pollution loading, cost-reduction efficient by LID with design of structural BMPs including bioretention, wet pond, and wetland. As a simulation results, the bioretention had the highest reduction efficiency for runoff (41.43%), and 22% for T-N and 22% for BOD. Wet pont had the highest reduction efficiency for T-P as showing 25% of reduction rate. As a results of cost-reduction efficient, wet pont represented the highest cost-effective for T-N and BOD with showing 0.43 T-P kg/million won and 17.37 BOD kg/million won, respectively, and bioretention represented the highest cost-effective for T-P with showing 2.52 T-P kg/million won. LID technology could reduce effectively surface runoff and nonpoint source pollution and construct sustainable development. LIDMOD2 could be suggested as useful tool to evaluate and design LID.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 추계학술대회 논문집
• /
• pp.444-445
• /
• 2008

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2009년도 추계학술대회 논문집
• /
• pp.568-570
• /
• 2009

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2004년도 학술발표논문집
• /
• pp.120-120
• /
• 2004

• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.365-375
• /
• 2009

Agriculture reservoirs need a systematic approach that can control water purity and water improvement. The area under study, Bunam Lake exceeds the agricultural water standard level due to contamination from the upper stream. When the Taean Enterprise City was planned, the water quality improvement plan was applied to minimize the environmental change. However, in order to continuously maintain the water quality in the Bunam Lake, it was essential to apply the Total Pollution Load Management System (TPLMs). In order to achieve the targeted water quality in the Bunam Lake, standard flow rates and targeted water quality levels were applied to obtain the loading capacity which is as follows : BOD 1,891.2 kg/d, T-N 1,945.7 kg/d, T-P 131.7 kg/d. Also, the regional development load was calculated as, BOD 1,083.6 kg/d, T-N 942.2 kg/d, T-P 61.8 kg/d, which is required to be deceased :- by BOD 378.4 kg/d, T-N 198.9 kg/d, T-P 31.6 kg/d in order to safely achieve the targeted water quality in the Bunam Lake.

• 한국지반환경공학회 논문집
• /
• 제10권3호
• /
• pp.53-62
• /
• 2009

본 연구는 건설 현장에서 발생하는 비점오염원 발생 특성에 대해서 파악하고, 이에 대한 관리 기술들을 적용하여, 각 시설별 효과에 대해 평가하고자 하였다. 건설 현장의 공사 단계별로 비점오염원의 발생 특성을 보면, 공사 초반 즉, 토양 피복 상태가 교란되어 있는 경우, 강우 시 부유물질 부하량이 높게 나타나며, 강우 강도에 대한 민감도가 공사 후반에 비해 높은 것으로 확인되었다. 건설 현장에서 가설 형식으로 적용할 수 있는 기술로는 부유물질을 제어할 수 있는 Check dam, Silt fence 공법과 강우 시 토사 유실을 원천적으로 제어하는 Geotextile공법을 적용한 결과, Geotextile이 다른 공법에 비해 비점오염원 유출량 제어에 효과적인 것으로 확인 되었다. Check dam과 Silt fence는 공극에 의한 부유물질 제거 기능이 일부 있으나, 전반적으로 일시적 저류에 의한 침강효과로 오염물질을 제거 하는 특징이 있다. 이러한 가설 형식 처리 시설의 경우, 처리 효율이 낮아 주변 민원 또는 수계 오염을 유발할 수 있으며, 이에 부가적으로 가압식 여과 방법을 통해 연계 처리한 결과 만족할 만한 방류 수질을 기대할 수 있었다. 또한, 이러한 여과 방법은 여과 속도와 유입 부하량에 따라 처리 가능한 부하량이 결정되며, 효과적 운전을 위해서는 전처리가 반드시 필요하다.