• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.45-53
• /
• 2004

This paper proposes and analyzes a new media access control (MAC) scheduling algorithm, “Interleaved Polling with Deficit Round Robin (IPDRR)” that supports weighted fairness among ONUs in Ethernet Passive Optical Network (PON). The purpose of the proposed IPDRR algerian is not only to eliminate the unused bandwidth of upstream ONU traffic, but also to provide weighted fair sharing of upstream bandwidth among ONUs in Ethernet PON systems. Simulation results show that the IPDRR improves the utilization of upstream channel by removing the unused bandwidth and provides weighted fairness among ONUs, although the IPACT scheduling is unfair according to traffic characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.114-129
• /
• 2005

In this paper, we examine Interleaved Polling with Adaptive Cycle Time (IPACT) algorithm which was proposed to control upstream traffic for Gigabit Ethernet-PONs, and we analyze the performance of the gated service and the limited service of the IPACT mathematically. For the mathematical performance analysis, we model IPACT algorithm as a polling system and use mean-value analysis. We divide arrival rate λ value into three regions and analyze each region accordingly. We obtain average packet delay, average queue size and average cycle time of both the gated and the limited service. We compare analytical results with simulation to verify the accuracy of the mathematical analysis. Upon now, simulation analysis have been used to evaluate the performance of EPONs, which require much time sud effort. Mathematical analysis can be widely used in the design of EPON systems since system designers can obtain various performance results rapidly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1405-1411
• /
• 2022

Power management is still an important issue in embedded environments as hardware advances like high-performance processors. Power management methods such as DVFS control CPU frequencies in an adaptive manner for efficient power management in polling-based I/O programs such as network communication. This paper presents the problems of the existing power management method and proposes a new power management method. Through this, it is possible to reduce electric consumption by increasing the polling cycle in situations where the frequency of data reception is low, and on the contrary, in situations where data reception is frequent, it can operate at the maximum frequency without performance degradation. After implementing this as a code layer on the embedded board and observing it through Atmel's Power Debugger, the proposed method showed a performance improvement of up to 30% in energy consumption compared to the existing power management method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.612-622
• /
• 2013

In this paper, we propose a coding packet group-based ARQ scheme (rNC) for file delivery in wireless networks. rNC assumes multiple network coding points between the source and the destination. Each network coding point gathers and codes a group of packets according to the queue polling system. A queue polling system makes a few or several packets available for coding in a queue while polling the other queues in the system. Thus, we assuem a queue polling system at each network coding point. We call this group of packets as coded packet group. Each coding point acknowledges the reception of every code packet group to its previous coding point for reliable delivery. Thus, the intermediate coding points including the source can release its buffer before the packet is delivered to the destination. To guarantee the ultimate file delivery to the destination, the destination sends acknowledgement to the sender. We evaluate our proposed scheme using ns-2 and compare the performance with CodeCast. The results show that rNC works better than CodeCast in terms of packet delivery ratio and control overhead in unreliable wireless networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.31-40
• /
• 2004

In this paper, we analyze mathematically the performance of the gated service scheduling in the Interleaved Polling with Adaptive Cycle Time(IPACT) was proposed to control upstream traffic for Gigabit Ethernet-PONs. In the analysis, we model EPON MAC protocol as a polling system and use mean value analysis. We divide arrival rate λ into three regions and analyze each region accordingly In the first region in which λ value is very small, there are very few ONUs' data to be transmitted. In the second region in which λ has reasonably large value, ONUs have enough data for continuous transmission. In the third region, ONUs' buffers are always saturated with data since λ value is very large. We obtain average packet delay, average Queue size, average cycle time of the gated service. We compare analysis results with simulation to verify the accuracy of the mathematical analysis. Simulation requires much time and effort to evaluate the performance of EPONs. On the other hand, mathematical analysis can be widely used in the design of EPON systems because system designers can obtain various performance results rapidly. We can design appropriate EPON systems for varioustraffic property by adjusting control parameters.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.1-4
• /
• 2010

RS-485, communication bases from small network system must prepare in collision. The collision is that mean the data transfer breaks. For a stabilized communication chooses 1:N polling methods. But polling is low speed in addition to maybe overload Master device. So, usual N:N Prefers a communication. In this case, must be preparing to avoid collision or some solutions. Generally, to after collision retransmits after short time. It's called delay time for short time. When making a delay time, uses address of each systems. (Address of each node) If the many nodes collided, the each node has different delay time. When making a delay time, uses a usual random number. Making a random number is hard job. So uses a usual pseudorandom number. It is more difficult from small size MCU. The Chaos random number provides stabled value. Finally, when uses the Chaos random number, the stability and reliability of system get better.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1420-1423
• /
• 1996

This paper presents the implementation of network for automation using fieldbus. The RS-485 and twisted pair are used in layer 1 and medium, respectively. We implement FDL(Fieldbus Datalink Layer) using C-language and use token-bus network. The network consists of polling system and token passing system. The amount of transmitted data frames is evaluated with various transmission speeds that affect the system stability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.311-331
• /
• 2004

This paper addresses the democracy-oriented regulatory and legal requirements that e-democracy impacts. It demonstrates that the structure of the political system also plays a significant role in the decision to develop an e-voting application. The short term perspective of the questions put before the electorate obliterate the long term perspective in which many policy problems have to be seen. A well-designed e-voting system should produce an audit trail that is even stronger than that of conventional systems (including paper-based systems). Remote Internet voting systems pose significant risk to the integrity of the voting process, and should not be fielded for use in public elections until substantial technical and social science issues are addressed. Conclusively the paper focuses on the specific attributes an electronic voting (polling place) system should respect and ensure such as transparency, verifiability, accountability, security and accuracy in relation to the constitutional requirements such as General, Free. Equal, Secret, Direct and Democratic.