• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.933-938
• /
• 2008

2,4-Di-(2'-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and polymerized with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters 4 and 5 containing dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer backbone. The resulting polymers 4 and 5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. Polymers 4 and 5 showed thermal stability up to 300 ${^{\circ}C}$ in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 83-94 ${^{\circ}C}$. The second harmonic generation (SHG) coefficients ($d_{33}$) of poled polymer films at the 1064 nm fundamental wavelength were around $6.48\;{\times}\;10^{-9}$ esu. The dipole alignment exhibited high thermal stability even at 10 ${^{\circ}C}$ higher than $T_g$ and no significant SHG decay was observed below 105 ${^{\circ}C}$ partially due to the main-chain character of polymer structure, which is acceptable for NLO device applications.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.803-810
• /
• 2001

A nonlinear optical hyperbranched polyester (PE-Azo/Hyper) was synthesized from 4-[N,N-bis(hydroxyethyl)amino-4'-formyl] azobenzene and cyanoacetic acid by a Knoevenagel polycondensation using 4-(dimethylamino) pyridine as a base. The resulting polymer was soluble in polar aprotic solvents such as N,N-dimethylformamide and 1-methyl-2-pyrrolidinone and could be processed into optical quality films by spin coating. The molecular weight was determined to be $M_w$=61,800 ($M_W/M_n{=1.86}$) by gel permeation chromatography using polystyrene as a standard. No melting point was detected by differential scanning Calorimeter, indicating that this polymer presents an amorphous state. It shows a glass transition temperature of $121^{\circ}C$. The second-order nonlinear optical coefficient $d_{33}$ of the poled polymer determined by the second harmonic generation at 1064 nm was 25.4 pm/V.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.661-666
• /
• 2009

1-{2,4-Di-(2-hydroxyethoxy)phenyl}-2-(2-thienyl)ethene (5) was prepared and condensed with terephthaloyl chloride to yield polyester (6). Polymer 6 was reacted with tetracyanoethylene to give novel Y-type polyester (7) containing 1-(2,4-dioxyethoxy)phenyl-2-{5-(2,2,3-tricyanovinyl)-2-thienyl)}ethenyl groups as NLO-chromophores, which are parts the polymer backbones. Polymer 7 is soluble in common organic solvents such as acetone and N,N-dimethylformamide. It showed thermal stability up to 300 ${^{\circ}C}$ in thermogravimetric analysis with glasstransition temperature obtained from differential scanning calorimetry near 134 ${^{\circ}C}$. The second harmonic generation (SHG) coefficient ($d_33$) of poled polymer film at the 1560 nm fundamental wavelength was around 6.74 x $10^{-9}$ esu. The dipole alignment exhibited high thermal stability up to the glass-transition temperature ($Tg$), and there was no SHG decay below 135 ${^{\circ}C}$ because of the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.753-757
• /
• 2001

1-(2'2'3'-Tricyano-3-carbomethoxycyclopropyl)-34-di-(2'-hydroxyethoxy)benzene, (4) was prepared by the reaction of bromomalononitrile with methyl 3,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3). Diol 4 was condensed with tolylene-2,4-diisocyanate, 3,3'-dimethoxy-4,4'-biphenylenediisocyanate, and 1,6-hexamethylenediisocyanate to yield polyurethanes 5, 6, and 7 containing tricyanocyclopropane functionalities in the pendant group. The resulting polymers 5-7 were soluble in common organic solvents and the inherent viscosities were in the range of 0.25-0.30 dL/g. Polyurethanes 5-7 showed a thermal stability up to 300 $^{\circ}C$ in TGA thermograms. Solution-cast films showed Tg values in the range of 100-125 $^{\circ}C$ and piezoelectric coeffcients (d31) of the poled polymer films were 1.3-2.0 pC/N, which are acceptable for piezoelectric device applications.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.567-572
• /
• 1999

5-Nitro-2-(2'-vinyloxyethoxy)benzylidenemalononitrile (2a), methyl 5-nitro-2-(2'-vinyloxyethoxy)benzylidenecyanoacetate (2b), 3-nitro-4-(2'-vinyloxyethoxy)benzylidenemalononitrile (4a), methyl 3-nitro-4-(2'-vinyloxyethoxy)benzylidenecyanoacetate (4b), 2-nitro-5-(2'-vinyloxyethoxy)benzylidenemalononitrile (6a), and methyl 2-nitro-5-(2'-vinyloxyetboxy)benzylidenecyanoacetate (6b) were prepared by the condensation of 5-nitro-2-(2'-vinyloxyethoxy)benzaldehyde (1), 3-nitro-4-(2'-vinyloxyethoxy)benzaldehyde (3), and 2-nitro-5-(2'-vinyloxyethoxy)benzaldehyde (5) with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2a-b, 4a-b, and 6a-b were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ethers) 7-9 having oxynitrobenzylidenemalononitrile and oxynitrobenzylidenecyanoacetate, which is effective chromophore for second-order nonlinear optical applications. Polymers 7-9 were soluble in common organic solvents such as acetone and DMSO. Tg values of the resulting polymers were in the range of 67-83 ℃. Electrooptic coefficient (r33) of the poled polymer films were in the range of 15-27 pm/V at 633 nm. Polymers 7-9 showed a thermal stability up to 300 ℃ in TGA thermograms, which is acceptable for NLO device applications.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.607-612
• /
• 1996

A series of new NLO-active poly(4-nitrophenylallylamine) derivatives was synthesized by the nucleophilic substitution reaction of several substituted 4-nitrohalobenzenes and poly(allylamine hydrochloride). All polymers obtained were amorphous and their glass transition temperatures (Tg) were observed around 148-160 ℃. For each of these polymers, their specific Tg values were dependent on characteristic electronic structures. UV-visible absorption spectra showed maximum absorption intensity at 355-393 nm for π-π* transition of alkylaminonitrophenyl groups. The χ(2)value of poly(4-nitrophenylallylamine), as determined by the second harmonic generation at 1064 nm, for a thin polymer film poled at an elevated temperature, was 1.4x10-8esu. The third-order NLO properties of poly(4-nitrophenylallylamine) derivatives were evaluated through measurement of degenerate four-wave mixing technique and χ(3) coefficient in the range of 2.7~3.2x10-12 esu at 602 nm was found with 400 fs laser pulses.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.170-171
• /
• 2003

비선형 광학은 새로운 광원 개발, 광신호의 전광 고속 처리 같은 분야에 응용 가능하기 때문에 비선형 광학 특성이 좋은 물질의 개발과 정해진 특성을 극대화시킬 수 있는 여러 가지 위상정합 방법의 개발이 진행되고 있다. 우리는 특성이 클 뿐 아니라 만들기 쉽고 제조가격이 싸다는 장점을 갖는 유기 고분자에 대해 2차 비선형 광학 계수를 측정해 보았는데, 단순히 계수의 크기만을 측정하지 않고 계수의 부호도 직접 관찰하여 고분자를 이용한 준위상정합의 가능성을 확인하였다. (중략)

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.581-585
• /
• 2004

A copolymer P[OSA-MI] was synthesized by copolymerization of its corresponding monomers, N-phenyl maleimide (MI) and 2-octen-l-ylsuccinic anhydride (OSA). The polymer (poly[2-[1-(2,5-dioxo-l-phenylpyrroli­din-3-ylmethyl)heptyl]-succinic acid 4-(2-$\{$ethyl-[4-(4-nitrophen-ylazo)phenyl]amino$\}$ethyl)ester]) P[DR1MA-MI] was obtained from the reaction of P[OSA-MI] with 2-[4-(4-nitrophenylazo)-N-ethylphenylamino] ethanol (DR1). A stable monolayer of P[DRIMA-MI] was formed by spreading the solution of the polymer in chloroform. In Y-type Langmuir-Blodgett (LB) films prepared using this Langmuir-Blodgett method, the second harmonic waves generated from adjacent mono layers canceled each other out. In X-and Z-type LB films, the second harmonic intensity increased upon increasing the number of monolayers, but this increase was somewhat smaller than predicted by the square law. This phenomenon is due to defects or imperfect alignment of the dipoles in the LB film. The generation of second harmonic waves from Y-type LB films having an even number of mono layers supports this argument. The degree of imperfection seemed to increase as the number of layers increased. The second-order nonlinear optical properties of spin-cast films of these polymers were also measured. The largest second harmonic coefficient of the poled P[DRIMA-MI] film coated on a glass plate was 19 pm/V.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.356-362
• /
• 2002

The molecular orientational dynamics of the nonlinear optical(NLO) side-chain polymer N-(4-nitrophenyl)-(L)-prolinol-poly (pphenylene terephthalates) have been studied using nonlinear optical responses as measured by second harmonic generation (SHG). A new pulsed corona poling is used to orient the NLO chromophores and the polymer segments into the noncentrosymmetric structure required to obtain the SHG signal. By corona poling of negative high voltage pulses with variable repetition rates (between 0.5 and 10 ㎑) at temperature between 25$^{\circ}C$ and 80$^{\circ}C$, well below and about the glass transition temperature 70$^{\circ}C$, the side-chain chromophores and the polymer chain contour rearrange themselves and create the domain structure observed by atomic force microscopy(AFM). The pulsed corona voltage enhances the orientational ordering of the NLO chromophores and also significantly influences the growth of SHG signal and the improved relaxation behavior after the poling field is removed, reducing the visible damage to the polymer film dramatically. This new pulsed corona poling experiment gave direct in situ evidence that the NLO chromophore and the polymer backbone undergo anisotropic rearrangement during the poling process.

• Korean Journal of Materials Research
• /
• v.34 no.1
• /
• pp.34-43
• /
• 2024

New piezoelectric and triboelectric materials for energy harvesting are being widely researched to reduce their processing cost and complexity and to improve their energy conversion efficiency. In this study, BaTiO₃ films of various thickness were deposited on Ni foams by R.F. magnetron sputtering to study the piezoelectric and triboelectric properties of the porous spongy structure materials. Then piezoelectric nanogenerators (PENGs) were prepared with spongy structured BaTiO₃ and PDMS composite. The output performance exhibited a positive dependence on the thickness of the BaTiO₃ film, pushing load, and poling. The PENG output voltage and current were 4.4 V and 0.453 ㎂ at an applied stress of 120 N when poled with a 300 kV/cm electric field. The electrical properties of the fabricated PENG were stable even after 5,000 cycles of durability testing. The triboelectric nanogenerators (TENGs) were fabricated using spongy structured BaTiO₃ and various polymer films as dielectrics and operated in a vertical contact separation mode. The maximum peak to peak voltage and current of the composite film-based triboelectric nanogenerator were 63.2 V and 6 ㎂, respectively. This study offers new insights into the design and fabrication of high output nanogenerators using spongy structured materials.