• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.171-173
• /
• 2004

Electromagnetic force is one of the most important factor that effect on metal transfer mode, short-circuit rate, spatter generation rate and mechanical properties of weld metal etc. Also, shielding gas and welding current have influence on metal transfer mode in GMAW. In this paper, different ways for external electromagnetic forces are applied by attaching cylindrically rounded conducting wire solenoid on touch tip holding. With the applied electromagnetic field, the arc transfer mode changes from normal mode to rotating mode and spatter generation decreased in electromagnetic fields(N-pole). In MIG welding, the influences of electromagnetic force on the spatter generation showed different tendency as in the $CO_2$ welding. It is possible reasons were discussed.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.53-55
• /
• 2007

Industrial interest in switched reluctance moor (SRM) drives has varied since 1850s. This has been primarily due to the emerging markets for variable speed drives in consumer and industrial products, such as home appliances, air conditioning, hand tools, fans, pump motor, etc. However, SRM has been plagued with the acoustic noise and vibration problem by input power of fixed section. Therefore, This paper offers electromagnetic analysis for torque ripple reduction in mechanical geometry and electric parameters. This means that the rotor pole arc and electric parameters have related to produce the active and negative torque. This analysis results are verified by the finite element method.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.62-64
• /
• 2007

This paper deals with design of high speed linear switched reluctance motor(LSRM). First, we derived design factor from pole arc ratio of stator and mover, and calculated time constant using inductance and resistance. Second, we decided design parameter from design factor using time constant. Finally, analyze characteristics for LSRM using finite element analysis.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.166-168
• /
• 2002

This paper presents a new numerical algorithm suitable for defining recloser reclaims time and blocking automatic reclosing during permanent faults on overhead lines. It is based on terminal voltage input data processing. The decision if it is safe or not to reclose is determined from the voltage signal of faulted and tripped line phase using Total Harmonic Distortion factor calculated by Discrete Fourier Transform. The algorithm was successfully tested using signals recorded on the real power system. The tests demonstrate the ability of presented algorithm to determine the secondary arc extinction time and to block unsuccessful automatic reclosing of HV lines with permanent fault.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.47.4-48
• /
• 2017

In the middle of $19^{th}$ century, the Seong Gyeong 星鏡, which is a Korean historical astronomy book, was published by Nam Byeong-Gil(1820-1869). In this study, identification was conducted by considering the star catalogue recorded in the Yixiang Kaocheng Xubian 儀象考成續編. The Seong Gyeong 星鏡 recorded the information of 1,449 stars, and identified 1,413 stars among 1,449 stars, which is a rate of 97.5%. The positional error (angular distance) of the identified stars is $5.33{\pm}0.34$ arc-min. It was also confirmed that the magnitudes of the recorded stars have correlations with those of modern times. It was determined that the position error of the stars became larger as the magnitude of the stars became dimmer, or as the position of the stars came closer to the pole. Based on these analyses, the Seong Gyeong 星鏡 was confirmed that it is a result of correcting the precession of the selected stars from star catalogue of Yixiang Kaocheng Xubian 儀象考成續編.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.83-83
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.59-61
• /
• 2008

This paper deals with design of Linear Switched Reluctance Motor (LSRM) considering to normal force. First, we derived design factor from pole arc ratio of stator and mover, and calculated time constant using inductance and resistance. Second, we decided design parameter from design factor using time constant, and analyze characteristics for LSRM using finite element analysis. Finally, we analyzed force characteristic according to design factor.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.462-467
• /
• 2010

This paper presents the rotor shape optimization of an interior type permanent magnet (IPM) motor for a reduction of vibration and Electromagnetic Interference (EMI). The vibration and EMI in permanent magnet motors is generated by cogging torque ripple, radial force and commutation torque ripple. Consequently, in order to improve vibration and EMI, the optimal notches are put on the rotor pole with an arc shape proposed. The variation of vibration frequency due to the cogging torque and radial force of each model is computed by the finite element method (FEM). From the analysis result and experiment, we confirmed the proposed model has remarkably improved the vibration and EMI.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.7
• /
• pp.369-373
• /
• 2006

In this paper, an optimal method for determining design parameters of a Switched Reluctance Motor is researched. The dominant design parameters are stator and rotor pole arc and switching on and off angle. The parameters affecting performance are examined and selected using evolutionary computations and commercial CAD program. The simulated design method is compared with conventional procedure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.39-46
• /
• 1998

For permanent magnet brushless DC motors used for high speed fuel pumps, torque ripple is an important origin of vibration, acoustic noise and speed fluctuation. In this paper, the output torque profile of a PM motor with one phase energized is decomposed into the commutation torque, the reluctance torque and the armature reaction torque according to their source origins. It verifies that the output torque profile is qualitatively equivalent to the BEMF profile for low reluctance motors. This paper discusses the effect of magnet pole shaping and magnet arc length on the output torque and torque ripple. A magnet edge shaping is proposed to design a trapezoidal BEMF motor without torque ripple, with minimal sacrifice of the maximum output torque.