• Journal of Information Display
• /
• 제12권3호
• /
• pp.129-134
• /
• 2011

The universal current reversal method is used for the simultaneous measurement of response time (${\tau}$), azimuthal angle (${\varphi}_o$), spontaneous polarization ($P_S$), and rotational viscosity (${\gamma}_{\varphi}$) of two ferroelectric liquid crystals (FLCs). The application of AC field in FLCs results in reorientational current, which is further analyzed to obtain various parameters. The variation in the parameters with temperature follows the typical trend predicted by the theory. The theoretical curve fits well into the experimental data. Its comparison with traditional current reversal method is confirmed to address certain limitations of that method.

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.221-227
• /
• 2015

등가 전송선로에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT)을 이용하여 이중 샌드위치 Rib-형 층으로 구성된 나노 크기의 격자 구조형 편광 무의존성 결합기 (Grating-Assisted Polarization-Insensitive Coupler: GA-PIC)의 편광특성을 자세하게 분석하였다. 제안한 나노 크기의 GA-PIC의 편광 무의존성 조건을 얻기 위하여 샌드위치 rib형 층의 굴절률과 두께에 따라 변하는 quasi-TE 모드와 quasi-TM 모드의 결합길이를 분석하였으며, 격자구조의 광학적 변수들인 격자두께와 격자주기에 따른 결합길이의 영향도 분석하였다. 수치해석 결과, 수백 나노미터 크기의 GA-PIC는 이중 샌드위치 층과 격자구조의 구조적, 물질적 변수들을 잘 선택함으로써 구현할 수 있음을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.171-176
• /
• 2014

종방향 모드 전송선로 이론을 이용하여 이중 샌드위치 Rib-형 도파로에 기초한 초소형 편광 무의존성 방향성 결합기 (PIDC)의 편광특성을 자세하게 탐구하였다. 제안한 초소형 방향성 결합기의 편광 무의존성 조건을 얻기 위하여 샌드위치 rib형 도파로의 굴절률과 두께에 때라 변하는 quasi-TE 모드와 quasi-TM 모드의 결합길이와 결합효율을 분석하였다. 수치해석 결과, 수백 마이크로미터 크기의 초소형 편광 무의존성 방향성 결합기는 이중 샌드위치 층의 구조적, 물질적 변수들을 잘 선택함으로써 구현할 수 있음을 보였다. 또한, 이중 샌드위치 rib형 도파로에 분포하는 기본 모드의 프로필이 방향성 결합기의 성능에 어떤 영향을 미치는지에 대하여 조사하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5610-5624
• /
• 2017

A novel scheme based on polarization modulation and the weighted fractional Fourier transform (PM-WFRFT) is proposed in this paper to enhance the physical layer security of dual-polarized satellite systems. This scheme utilizes the amplitude and phase of the carrier as information-bearing parameters to transmit the normal signal and conceals the confidential information in the carrier's polarization state (PS). After being processed by WFRFT, the characteristics of the transmit signal (including amplitude, phase and polarization state) vary randomly and in nearly Gaussian distribution. This makes the signal very difficult for an eavesdropper to recognize or capture. The WFRFT parameter is also encrypted by a pseudo-random sequence and updated in real time, which enhances its anti-interception performance. Furthermore, to prevent the polarization-based impairment to PM-WFRFT caused by depolarization in the wireless channel, two components of the polarized signal are transmitted respectively in two symbol periods; this prevents any mutual interference between the two orthogonally polarized components. Demodulation performance in the system was also assessed, then the proposed scheme was validated with a simulated dual-polarized satellite system.

• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.135-140
• /
• 2012

The linear polarization resistance method is one of the widely used techniques for the corrosion rate monitoring in the water circulating systems of plants. The measurement is simple and rapid, so that a continuous on-line monitoring is possible without any shutdown of plants. A 2-electrode polarization corrosion rate measurement system was installed in a laboratory using a data acquisition board and PC. The signal processing parameters were optimized for the accurate corrosion rate measurement, and the polarization resistance was compensated with the solution resistance measured by the high frequency sine wave signal of an output channel. The precision of corrosion rate data was greatly improved by removing the initial noise signals on measuring the polarization resistance.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.47-52
• /
• 2018

We systematically investigated the negative-refraction effect for both TE and TM polarizations in annular photonic crystals. Since two polarization waves are excited in different bands, they result in different refractive angles, and so polarization beam splitters can be made of annular photonic crystals. It was found that, in comparison to normal square-lattice air-hole photonic crystals, annular photonic crystals have a much wider common frequency band between TE-1 and TM-2, which is quite beneficial to finding the overlap between the negative-refraction regions belonging to TE-1 and TM-2 respectively. Further analyses of equifrequency surfaces and the electric-field distribution of annular photonic crystals with different parameters have not only demonstrated how the filling factor of annular cells affects the formation of the common negative-refraction region between TE-1 and TM-2, but also revealed some ways to improve the performance of a polarization beam splitter based on the negative-refraction effect in an annular photonic crystal.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권3호
• /
• pp.159-167
• /
• 1999

This study performed experiments for measuring corrosion potential and current density variations in the polarzation curves of polyvinylchloride. The results were examined to identify particular influences affectingthe corrosion potential such as temperature, pH, enzyme, and salt. The lines representing active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme and salt. The Tafel slope for the anodic dissolution was determined using the polarization effect with varying conditions. The slope of the polarization curves describing the active-to-passive transition region was noticeably shifted in the potential direction. In addition, using the variation in conditions, the best temperature and pH were determined for the corrosion rate, and resistance of corrosion. The second anodic current density peak and maximum passive current density were designated as degraded(IP/I0). The value of IP/I0 was used in measuring the extent of the degradation of the polyvinychloride. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• 천문학회보
• /
• 제39권2호
• /
• pp.79.1-79.1
• /
• 2014

We present the result of near-infrared (near-IR) imaging polarimetry of star-forming regions in the Large Magellanic Cloud (LMC). We compiled near-IR photometric and polarimetric data of N159/160 regions. The photometric and polarimetric data were simultaneously obtained in J, H, and Ks bands using SIRPOL, an imaging polarimeter of the InfraRed Survey Facility (IRSF), in 2007 February. We measured Stokes parameters of point-like sources to derive their degree of polarization and polarization position angles. In this poster, we present polarization properties of these star-forming regions. We also discuss the polarization structure in these regions compared with mid-infrared dust emission structure from the Spitzer SAGE survey.

• Journal of information and communication convergence engineering
• /
• 제16권3호
• /
• pp.197-202
• /
• 2018

This paper reveals the impact of the insertion of electromagnetic band gap (EBG) structures on the performance of circularly polarized (CP) patch-slot antenna with offset slot. Several optimizations are necessary to precise physical parameters in the aim to fix the resonance frequency at 3.2 GHz. The proposed antenna possesses lightweight, simplicity, low cost, and circular polarization ensured by two feeding sources to permit right-hand and left-hand circular polarization process (RHCP and LHCP). The measured results compared with simulation results of the proposed circularly polarized EBG antenna with offset slot show good band operations with –10 dB impedance bandwidths of 9.1% and 36.2% centered at 3.2 GHz, which cover weather radar, surface ship radar, and some communications satellites bands. Our investigation will confirm the simulation and experimental results of the EBG antenna involving new EBG structures.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.255-261
• /
• 2000

Experiments were carried out to measure the corrosion potential and current density variations in the polarization curves of polypropylene. In particular, the results were examined to identify those influences affecting the corrosion potential, such as temperature, pH, salt, and oxygen. The Tafel slope for the anodic dissolution was determined based on the polarization effect under various conditions. Furthermore, the optimum conditions for the most rapid transformation were establish based on a variety of conditions, including temperature, pH, corrosion rate, and resistance of corrosion potential. The second anodic current density peak and maximum passive current density were designated as the critical corrosion sensitivity(I(sub)r/I(sub)f). This I(sub)r/I(sub)f value was then used to measure the critical corrosion sensitivity of polypropylene. The potentiodynamic parameters of corrosion were obtained using a Tafel plot.