• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1526-1531
• /
• 2008

The objective of this study is to evaluate the loading capacity of lattice girder according to loading position. 3-point flexible strength tests were performed on three types of lattice girder, such as LG-$50{\times}20{\times}30$, LG-$70{\times}20{\times}30$, and LG-$95{\times}22{\times}32$, mainly used in Korea. Two types of loading position for each flexible strength test were used to analyze the behavior of load-deformation. In 3-point flexible strength test, the difference of the average of maximum flexible strength according to loading position had the range from 10% to 33%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.863-874
• /
• 2008

We have to judge engineering properties of rock accurately in order to design and construct rock structure safely and economically. Among the rock tests, the test result of UCS(Uniaxial Compressive Strength) is very important factor used in the variety ways for designing and construction of underground structures, rock slope and foundation analysis. But the UCS test has some disadvantages of intact sample preparation such as because the shape of sample has to be regular cylindrical, cube or rectangular. In order to solve those problem, indirect tests are used such as point load test, schmidt hammer test, absorption test, dry density to predict UCS of rock. Those tests are easy to prepare sample and convenient to carry out the tests, so it is simple and costs less. Schmidt hammer test are frequently used in the construction site, because it is handy and easy to use, but there is concern of misuse without classifying the specification of each schmidt hammer. Thus, this study suggested presumptive numerical formula related on each specification of schmidt hammer test, point load test, absorption test and dry density also. We compared presumptive numerical formula and R-square through schmidt rebound assessment method already brought up. Also, through the test we offer the extent of weathering index according to the weathering grade.

• Structural Engineering and Mechanics
• /
• 제81권5호
• /
• pp.539-550
• /
• 2022

A detailed experimental program was conducted to investigate the flexural behavior of ultra high performance concrete (UHPC) beams reinforced with high strength steel (HSS) rebars with a specified yield strength of 600 MPa via direct tensile test and monotonic four-point bending test. First, two sets of direct tensile test specimens, with the same reinforcement ratio but different yield strength of reinforcement, were fabricated and tested. Subsequently, six simply supported beams, including two plain UHPC beams and four reinforced UHPC beams, were prepared and tested under four-point bending load. The results showed that the balanced-reinforced UHPC beams reinforced with HSS rebars could improve the ultimate load-bearing capacity, deformation capacity, ductility properties, etc. more effectively owing to interaction between high strength of HSS rebar and strain-hardening characteristic of UHPC. In addition, the UHPC with steel rebars kept strain compatibility prior to the yielding of the steel rebar, further satisfied the plane-section assumption. Most importantly, the crack pattern of the UHPC beam reinforced with HSS rebars was prone to transform from single main crack failure corresponding to the normal-strength steel, to multiple main cracks failure under the condition of balanced-reinforced failure, which validated by the conclusion of direct tensile tests cooperated with acoustic emission (AE) source locating technique as well.

• 한국지반공학회논문집
• /
• 제31권12호
• /
• pp.29-43
• /
• 2015

본 연구에서는 매입말뚝공법의 충전재료로 사용하는 시멘트밀크의 공학적 특성 시험을 실시하였다. 이를 위해 고속도로공사 전문시방서에서 사용하고 있는 표준공시체를 기준으로 다양한 물/시멘트 비율로 공시체를 제작하였다. 또한, 재령일에 따른 일축압축강도, 점하중강도, 탄성계수, 그리고 포아송비 시험을 실시하였다. 시험결과 물/시멘트 비의 변화에 따른 시멘트밀크의 표준 공시체 제작을 위한 주입높이를 제시하였다. 재령 7일과 28일에 대한 일축압축강도와 점하중강도와의 비인 시멘트밀크의 상관계수, K는 각각 $K_7=4.55{\sim}13.65$와 $K_{28}=5.28{\sim}16.84$ 이었다. 재령일과 무관하게 물/시멘트 비가 65~150%일 때 탄성계수와 포아송비의 증감은 크게 나타났고, 150~300%는 상대적으로 매우 작게 나타났다. 마지막으로 재령별 물/시멘트 비에 따른 시멘트밀크의 일축압축강도, 점하중강도, 일축압축강도와 점하중강도와의 상관계수, 탄성계수, 포아송비의 식을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제91권4호
• /
• pp.335-347
• /
• 2024

This paper presents the behavior of geopolymer concrete beams reinforced with glass fiber reinforced polymer (GFRP) bars. In the study, ordinary Portland cement concrete and geopolymer concrete beams having GFRP bars were prepared and tested under four-point loading. The load-deflection diagrams and load capacities of the tested beams were obtained. It was observed that the tested beams exhibited good ductility and significant deflection capacity. The results showed that increasing the tension GFRP reinforcement ratio caused enhancement in the strength capacity of geopolymer concrete beams. In addition, the tested beams were analyzed to obtain the load capacity and the load-deflection responses. The theoretical load-deflection curves and load bearing capacities have been predicted well with the test results. Parametric study has been performed to determine the influences of concrete strength, shear span to depth ratio (a/d) and reinforcement ratio on the behavior of geopolymer concrete beams longitudinally reinforced with GFRP bars. It was concluded that increasing concrete strength led to an increase in load capacity. Besides, the ultimate load increased as the reinforcement ratio increased. On the other hand, increasing a/d ratio reduced the ultimate load value of GFRP reinforced geopolymer concrete beams.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.733-738
• /
• 2000

It is difficult to obtain accurate fracture toughness values by RILEM committees proposed three point bend test(TPB) because the shape of load-deflection curve is irregular and final crack propagation occurs after some slow stable cracking. However, for disk test, fracture toughness is easily obtained from crack initial load. We examined the cracked high strength concrete disk and the experimental results were compared with the results by finite element analysis(FEA). Also we compared experimental fracture locus with theoretical fracture locus.

• 화약ㆍ발파
• /
• 제21권4호
• /
• pp.23-35
• /
• 2003

본 연구에서는 남원지역 화강암을 대상으로 각 방향에 따른 물성간의 상관관계와 역학적 이방성을 규명하고자 하였다. 화강암의 수평, 수직축의 방향별 물성치는 일축압축강도 및 압열인장강도와 선형관계를 나타내었으며, 초음파 속도 측정 결과 수직방향은 나머지 두 수평방향 보다 약 10∼15% 정도 빠르게 나타났다. 이러한 속도 차이의 원인은 주로 암석 내에 존재하는 미세균열의 발달형태에 따르는 것으로 판단되며, 이는 현미경관찰 결과와 매우 일치함을 알 수 있었다. 점하중시험에 의한 점하중강도지수(Is(50)) 측정결과, 화강암의 경우 일축압축강도와 점하중강도지수의 비는 18∼20에 해당하는 것으로 나타났다. 일축압축강도와 점하중강도지수. 슈미트해머 반발치. 압열인장강도와 좋은 상관관계를 나타내었으며, 이중 점하중강도지수가 가장 높은 상관관계를 보였다. 이로부터 알 수 있듯이 점하중 강도지수가 일축압축강도를 추정하는데 가장 유효한 도구임을 확인할 수 있었다.

• 지질공학
• /
• 제23권4호
• /
• pp.341-352
• /
• 2013

본 연구에서는 생성 당시의 퇴적환경이 상이한 것으로 알려진 대구지역의 적색 셰일과 흑색 셰일의 물리적 및 역학적 특성을 확인하기 위하여 단위중량, 흡수율, 공극률, 초음파속도, 일축압축강도, 점하중강도, 슬레이크 내구성 및 열화특성 시험 등을 실시하였고, XRD 및 XRF 분석과 SEM 영상 분석을 수행하였다. 시험결과 두 셰일의 단위중량은 유사하였으나 흡수율과 공극률은 적색 셰일이 흑색 셰일보다 더 높았다. 특이하게도 공극률이 높은 적색 셰일의 초음파속도, 일축압축강도, 점하중강도지수 가 흑색보다 더 높은 값을 보였는데 이는 흑색 셰일 내에 발달된 엽층리의 영향인 것으로 판단된다. 열화시험에서는 용액의 산성도가 증가할수록 또 수침시간이 길어질수록 시료의 점하중강도지수와 슬레이크 내구성지수의 저감정도가 심하였으며, 흑색 셰일보다는 공극률이 큰 적색 셰일에서 더 크게 영향을 받는 것으로 나타났다.

• 기술사
• /
• 제24권3호
• /
• pp.43-50
• /
• 1991

On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-take test ; Compression strength, Point load test. 2. In-situ test : Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and S.H. test were carried out for site-engineer. This project is one of contineous works regarding to Burden test from Jack leg drill( ø 36mm) to Crawler drill( ø 75mm) use.

• 화약ㆍ발파
• /
• 제9권3호
• /
• pp.10-16
• /
• 1991

On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-situ test : Compressive strength, Point load test. 2. In-situ test Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and 5. H, test were carried out for site-engineer, This project is one of contineous works regarding to Burden test from Jack leg drill($\phi{\;}75mm$) use.