• Journal of Pharmacopuncture
• /
• v.4 no.3
• /
• pp.59-67
• /
• 2001

Objective: The purpose of this report is to prove the clinical effect of Platycodon grandiflorum aqueous extract on pneumoniae patients. Methods: We used the aqueous extract of Platycodon grandiflorum to treat two pneumoniae patients. It was injected into five acupuncture points, which was Chondol(天突:CV22) 1 point, Pyesu(肺兪 : BL13) 2 point, and Kworumsu(厥陰兪: BL14) 2 point. Results & conclusions: We have used the aqueous extract of 24-year-old JK for treating the patients suffering from lung diseases, and have experienced the actual effects. Of the treated, two pneumonia-involved patients showed apparent improvement in simple chest X-ray and clinical symptoms. The patients were treated with JK (Jang-saeng platycodon) aqueous extract 25 and 22 times individually. The results were as follows. 1. The symptoms including coughing, phlegm, and fever were improved in two cases. 2. The lung infiltration in simple chest X-ray decreased and the WBC count was kept within normal range in two cases. 3. Side effect such as itching was not found in the process of JK aqueous extract treatment. 4. The criteria for pneumonia are fever, coughing with purulent phlegm, pleural chest pain, the evidence of new infiltration in simple chest X-ray, sign of lung sclerosis in auscultation, increase of WBC count, etc. But they may not be the proper objective diagnostic standards. So we had trouble in statistic process and numerical interpretation. Putting these results together, the JK aqueous extract is considered to be effective in treating patients for pneumonia, and the continuous research and accumulation of data is needed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1950-1956
• /
• 1997

An engineering goal in vibration and noise professionals is to develope quiet machines at the preliminary design stage, and various numerical techniques such as FEM, SEA or BEM are one of the schemes toward the goal. In this paper, the research has been focused on the sensitivity effect of mesh sizes for FEM application so that the optimum size of the mesh that leads to engineering solution within acceptable computing time could be generated. In order to evaluate the mesh size effect, three important parameters have been examined : natural frequencies, number of modes and driving point mobility. First, several lower modes including the fundamental frequency of a 2-D plate structure have been calculated as mesh size changes. Since theoretical values of natural frequencies for a simple structure are known, the deviation between the numerical and theoretical values is obtained as a function of mesh size. The result shows that the error is no longer decreased if the mesh size becomes a quarter wavelength or smaller than that. Second, the mesh size effect is also investigated for the number of modes. For the frequency band up to 1.4 kHz, the structure should have 38 modes in total. As the mesh size reaches to the quarter wavelength, the total count in modes approaches to the same values. Third, a mobility function at the driving point is compared between SEA and FEM result. In SEA application, the mobility function is determined by the modal density and the mass of the structure. It is independent of excitation frequencies. When the mobility function is calculated from a wavelength to one-tenth of it, the mobility becomes constant if the mesh becomes a quarter wavelength or smaller. We can conclude that dynamic parameters, such as eigenvalues, mode count, and mobility function, can be correctly estimated, while saving the computing burden, if a quarter wavelength (.lambda./4) mesh is used. Therefore, (.lambda./4) mesh is recommended in structural vibration analysis.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.195-206
• /
• 2022

Gaining an understanding of bird communities in different habitat types is essential for the conservation of ecologically important habitats. Wetlands possess different types of habitats and provide an important environment for wintering waterbird communities. This study compares avian communities in five different habitat types in the Moeyungyi Wetland Wildlife Sanctuary (MWWS), Myanmar. From December 2014 to the first week of February in 2015, bird and habitat data were collected from representative areas of five habitat types (i.e., short grassland, tall grassland, lotus fields, open water areas, and rice fields) at MWWS. We established nine sampling plots in each habitat type, and used the point quadrat method to survey habitats and the point count method to survey birds in the habitats. Simple one-way analysis of variance (ANOVA) and post-hoc tests were used to determine differences between bird communities. We made 95 detections during 19 daily visits to each of the five habitat types. During the survey period, we recorded a total of 10,389 individuals belonging to 52 different bird species, based on 7-min observations at each of the 45 point count stations. Furthermore, we detected significant differences by habitat structure (i.e., vegetation coverage, height, and density; water depth; and plant species diversity) as well as bird communities (i.e., species richness, abundance, and diversity indices). In addition, the detailed analysis of 52 avian species revealed significant differences among 45 species with respect to the mean numbers of observed individuals in the survey habitats. The findings of this study revealed significant differences in the structure and composition of waterbird communities among the five assessed habitat types. Because natural marshes provide preferable habitats for a larger number and greater diversity of birds, relative to rice fields, natural marshes should be prioritized for conservation and restoration in Moeyungyi Wetland Wildlife Sanctuary.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5305-5310
• /
• 2015

Purpose: The aim of this study was to investigate the association between preoperative leukocyte and platelet counts and the stage of the disease in patients with endometrial cancer. Materials and Methods: Data for 100 patients undergoing total abdominal hysterectomy and bilateral salpingoophorectomy for benign uterine diseases and 177 patients surgically staged for endometrial cancer at Ondokuz Mayis University, Department of Gynecology and Obstetrics between 2005 and 2013, with preoperative complete blood count in the week prior to surgery including WBC, platelet count, pathologic evaluation for both benign and malign endometrium lesions, tumor stage and presence of lymphovascular space invasion (LVI), were retrospectively analyzed. Results: The preoperative leukocyte count was significantly higher in patients with endometrial cancer when compared to the patients with benign diseases. However, there were no significant differences in platelet counts between the groups. Patients with advanced stage endometrial cancer had higher preoperative leukocyte counts when compared to the early stage disease whereas there was no difference in platelet count. Multivariate regression analysis identified preoperative leukocytosis as an independent prognostic factor for endometrial cancer. The optimal cut-off point for WBC was calculated as 10,500 to differentiate stage 1-2-3 and 4 with 88.9% sensitivity and 86.3% specificity (AUC: 0.901, 95% CI: 0.829-0.973, p<0.001, PPV: 25.8%, NPV: 99.3%). Conclusions: Preoperative leukocytosis is independently associated with advanced endometrial cancer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.470-475
• /
• 2012

In Q-algorithm of EPCglobal Class-1 Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter, is not defined in the standard. And the values of weight C, which is the parameter for incrementing or decrementing the slot-count size, are not determined. Therefore, if the number of tags is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. Also, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation and select the weight based on the slot-count size of current query round.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• Proceedings of the KIEE Conference
• /
• 2004.11d
• /
• pp.37-39
• /
• 2004

To restrain abnormal voltage and effective operation in protect system, some of customer in Korea earth their own transformer in 154kV power system. The above ground system has some problems if ground fault occurs in other related area such as ground relay errors, under count register in two element register system. There for most huge customers opens the ground neutral and it causes errors in insulate and protection coordination and register system. In this paper presents the solution for above system.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.921-924
• /
• 2004

This paper is to investigate a crack for plasma sprayed MCrAlY coated material by acoustic emission method in 4-point bending test. The CoNiCrAlY is coated on Inconel-718 by vacuum plasma spray process. Micro-hardness measurement was conducted by means of Micro Vickers-hardness indentor. The porosity of coating layer was measured using a SEM and Image Analyzer. AE monitoring system is composed of PICO type sensor, a wide band preamplifier(40dB), a PC and AE DSP(16/32 PAC) board. The AE count, Hit and energy of coating specimens is measured according to coating thickness.