• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.32-39
• /
• 2020

In recent years, the construction industry is getting bigger and more complex, so it is becoming difficult to acquire point cloud data for construction equipments and workers. Point cloud data is measured using a drone and MMS(Mobile Mapping System), and the collected point cloud data is used to create a 3D digital map. In particular, the construction site is located at outdoors and there are many irregular terrains, making it difficult to collect point cloud data. For these reasons, adopting a noise reduction algorithm suitable for the characteristics of the construction industry can affect the improvement of the analysis accuracy of digital maps. This is related to various environments and variables of the construction site. Therefore, this study reviewed and analyzed the existing research and techniques on the noise reduction algorithm. And based on the results of literature review, performance evaluation of major noise reduction algorithms was conducted for digital maps of construction sites. As a result of the performance evaluation in this study, the voxel grid algorithm showed relatively less execution time than the statistical outlier removal algorithm. In addition, analysis results in slope, space, and earth walls of the construction site digital map showed that the voxel grid algorithm was relatively superior to the statistical outlier removal algorithm and that the noise removal performance of voxel grid algorithm was superior and the object preservation ability was also superior. In the future, based on the results reviewed through the performance evaluation of the noise reduction algorithm of this study, we will develop a noise reduction algorithm for 3D point cloud data that reflects the characteristics of the construction site.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.501-511
• /
• 2022

Three-dimensional (3D) models have become crucial for improving civil infrastructure analysis, and they can be used for various purposes such as damage detection, risk estimation, resolving potential safety issues, alarm detection, and structural health monitoring. 3D point cloud data is used not only to make visual models but also to analyze the states of structures and to monitor them using semantic data. This study proposes automating the generation of high-quality 3D point cloud data and removing noise using deep learning algorithms. In this study, large-format aerial images of civilian infrastructure, such as cut slopes and dams, which were captured by drones, were used to develop a workflow for automatically generating a 3D point cloud model. Through image cropping, downscaling/upscaling, semantic segmentation, generation of segmentation masks, and implementation of region extraction algorithms, the generation of the point cloud was automated. Compared with the method wherein the point cloud model is generated from raw images, our method could effectively improve the quality of the model, remove noise, and reduce the processing time. The results showed that the size of the 3D point cloud model created using the proposed method was significantly reduced; the number of points was reduced by 20-50%, and distant points were recognized as noise. This method can be applied to the automatic generation of high-quality 3D point cloud models of civil infrastructures using aerial imagery.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.345-346
• /
• 2023

As the shape and size of detectable objects diversifying recognition and segmentation algorithms have been developed to acquire accurate shape information. Although a high density of data captured by the repetition of scanning improves the accuracy of algorithms the high dense data decreases the efficiency due to its large size. This paper proposes standardization algorithms using the feature of structural members on indoor point cloud data to improve the process. First of all we determine the reduction rate of the density based on the features of the target objects then the data reduction algorithm compresses the data based on the reduction rate. Second the data arrangement algorithm rotates the data until the normal vector of data is aligned along the coordinate axis to allow the following algorithms to operate properly. Final the data arrangement algorithm separates the rotated data into their leaning axis. This allows reverse engineering of indoor point clouds to obtain the efficiency and accuracy of refinement processes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.435-438
• /
• 2001

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore, it becomes a major issue to handle the huge amount and various types of point data. To generate a CAD model from scanned point data efficiently, these point data should be well arranged through point data handling processes such as data reduction and segmentation. This paper proposes a new point data handling method using 3D grids. The geometric information of a part is extracted from point cloud data by estimating normal values of the points. The non-uniform 3D grids for data reduction and segmentation are generated based on the geometric information. Through these data reduction and segmentation processes, it is possible to create CAD models autmatically and efficiently. The proposed method is applied to two quardric medels and the results are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1283-1287
• /
• 2003

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore. it becomes a important to handle the huge amount and various types of point data to generate a surface model efficiently. This paper proposes a new triangular mesh generation method using 3D grids. The geometric information of a part can be obtained from point cloud data by estimating normal values of the points. In our research, the non-uniform 3D grids are generated first for feature based data reduction based on the geometric information. Then, triangulation is performed with the reduced point data. The grid structure is efficiently used not only for neighbor point search that can speed up the mesh generation process but also for getting surface connectivity information to result in same topology surface with the point data. Through this integrated approach, it is possible to create surface models from scanned point data efficiently.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.105-106
• /
• 2020

Recently, a method of deriving an efficient 2D floor plan has been attracting attention for remodeling of old buildings with inaccurate 2D floor plans, and thus, studies on reverse engineering of indoor Point Cloud Date(PCD) have been actively conducted. However, in the case of a indoor PCD, due to interference of indoor objects, available equipment is limited to Mobile Laser Scanner(MLS), which causes a efficiency reduction of data processing. Therefore, this study proposes an automatic derivation algorithm for 2D floor plan of indoor PCD based on pixelation. First, the scanned indoor PCD is projected on the XY coordinate plane. Second, a point distribution of each pixel in the projected PCD is derived using a pixelation. Lastly, 2 floor plan derivation based on the algorithm is performed.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.116-124
• /
• 2006

Poly(ethylene-co-15.3 mole% octene) ($PEO_{15}$) - 1-옥텐 2성분계 혼합물과 $PEO_{15}$와 (에틸렌 + 1-옥텐) 혼합용매로 이루어진 3성분계 혼합물의 상거동을 $160^{\circ}C$와 1,000 bar의 영역까지 측정하였다. $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물에서 에틸렌의 함량이 증가함에 따라 cloud-point 곡선이 측정되는 압력이 급격하게 높아졌다. 에틸렌 함량이 18 wt% 보다 낮을 경우, $PEO_{15}$ -에틸렌 - 1-옥텐 혼합물에서 bubble-point 곡선과 cloud-point 곡선이 모두 관측되었다. 에틸렌 함량이 증가함에 따라 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물에서 bubble-point 곡선이 관측되는 온도범위는 좁아졌으며, $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물이 단일상으로 존재하는 온도-압력 영역이 현저히 감소하였다. 에틸렌 함량에 따라 단일상 영역이 감소하는 것은 $PEO_{15}$와 (에틸렌 + 1-옥텐) 혼합용매 사이에 작용하는 분산인력이 줄어들기 때문이다. 에틸렌을 36 wt% 보다 적게 함유한 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물의 단일상 영역은 온도가 높아짐에 따라 감소하였다. 이와는 대조적으로 에틸렌을 50 wt% 보다 많게 함유한 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물의 단일상 영역은 온도가 녹아짐에 따라 증가하였다. $PEO_{15}$ 용해도를 낮추는 혼합용매 사이의 극성인력과 $PEO_{15}$ 용해도를 높이는 혼합용매의 밀도는 온도가 낮아짐에 따라 증가한다. 에틸렌 함량이 50 wt% 보다 많을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 커서 온도가 낮아짐에 따라 cloud-point 압력은 증가하였다. 에틸렌 함량이 50 wt% 보다 적을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 작아서 온도가 낮아짐에 따라 cloud-point 압력은 감소하였다.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.665-676
• /
• 2021

노후 건축물의 수가 증가함에 따라, 건물의 안전진단, 유지 보수에 대한 중요성이 증가하고 있다. 기존 외관 조사는 점검자의 주관적인 판단이 수반되어 평가 결과가 다르고 객관성과 신뢰성이 떨어진다. 따라서 본 연구는 기존 연구를 통해 기실시된 외관 조사 및 상태 평가 프로세스의 한계를 제시하였으며, UAV, Laser Scanner를 통해 3D Point Cloud 데이터를 수집하였다. 또한, Reverse Engineering 기술을 이용하여 3D 모델을 생성한 후 객관적인 상태평가 데이터를 취득하였다. 이후 기존의 정밀검사 데이터와 정밀 안전진단 데이터를 활용하여 DNN 구조를 생성하고, 고정밀도 측정 장치를 이용하여 얻은 상태평가 데이터를 적용하여 객관적인 건물안전등급을 산출하였다. 자동화된 프로세스는 20개의 노후된 건축물에 적용되며 동일 면적 건축물 기준 수작업으로 실시되는 안전진단의 시간에 비해 약 50% 감소하였다. 이후 본 연구에서는 안전등급 결과값과 기존값을 비교하여 안전등급 산출과정의 정확성을 검증하고 약 90%의 높은 정확도를 가진 DNN을 구축하였다. 이는 향후 노후 건물의 안전등급 산정의 신뢰성이 향상되고 비용과 시간을 절약해 경제성이 향상될 것으로 기대된다.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.95-107
• /
• 1999

The design models of a new product in general are created using clay models or wooden mock-ups. The reverse engineering(RE) technology enables us to quickly create the CAD model of the new product by capturing the surface of the model using laser digitizers or coordinate measuring machines. Rapid prototyping (RP) is another technology that can reduce the product development time by fabricating the physical prototype of a part using a layered manufacturing technique. In reverse engineering process, however, the digitizer generates an enormous amount of point data, and it is time consuming and also inefficient to create surfaces out of these data. In addition, the surfacing operation takes a great deal of time and skill and becomes a bottleneck. In rapid prototyping, a faceted model called STL file has been the industry standard for providing the CAD input to RP machines. It approximates the CAD model of a part using many planar triangular patches and has drawbacks. A novel procedure that overcomes these problems and integrates RE with RP is proposed. Algorithms that drastically reduce the point clouds data have been developed. These methods will facilitate the use of reverse engineered geometric data for rapid prototyping, and thereby will contribute in reducing the product development time.

• 대한임베디드공학회논문지
• /
• 제18권6호
• /
• pp.319-325
• /
• 2023

In this study, we proposed a method for hyperparameter optimization in the building and training of a deep learning model designed to process point cloud data collected by a millimeter-wave radar system. The primary aim of this study is to facilitate the deployment of a baseline model in resource-constrained IoT devices. We evaluated a RadHAR baseline deep learning model trained on a public dataset composed of point clouds representing five distinct human activities. Additionally, we introduced a coarse-to-fine hyperparameter optimization procedure, showing substantial potential to enhance model efficiency without compromising predictive performance. Experimental results show the feasibility of significantly reducing model size without adversely impacting performance. Specifically, the optimized model demonstrated a 3.3% improvement in classification accuracy despite a 16.8% reduction in number of parameters compared th the baseline model. In conclusion, this research offers valuable insights for the development of deep learning models for resource-constrained IoT devices, underscoring the potential of hyperparameter optimization and model size reduction strategies. This work contributes to enhancing the practicality and usability of deep learning models in real-world environments, where high levels of accuracy and efficiency in data processing and classification tasks are required.