• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.94-98
• /
• 2006

An optical microphone based on a dual-core fiber collimator and a membrane type micromirror serving as an optical head and a reflective diaphragm respectively was implemented. The micromirror diaphragm is suspended by a thin silicon bar linked with a frame, thus it is subject to a displacement induced by acoustic waves. The optical head incorporating two collimators integrated in a single housing gives light to and receives it from the diaphragm, rendering the optical microphone structure simple and compact. This dual-core collimator having a slowing varying beam profile facilitates the initial alignment of the optical head with the diaphragm, especially the distance between them. For the assembled microphone, the static characteristics were investigated tofind the operation point defined as the optimum distance between the head and the diaphragm, and a frequency response with a variation of about $\pm$5 dB for the range of up to 3kHz was achieved.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.3
• /
• pp.201-209
• /
• 2004

Important operation parameters and performance of a high temperature ceramic candle filter system were evaluated through a series of demonstration tests at a pilot-scale vitrification plant. At the initial period of each test, due to the growth of dust cake on the surface of ceramic candles, the pressure drop across the filter media increased sharply. After that it became stable to a certain range and varied continuously proportion to the face velocity of off-gas. On the contrary, at the initial period of each test, the permeability of filter element decreased rapidly and then it became stable. Back flushing of the filter system was effective under the back flushing air pressure range of 3∼5 bar. Based on the dust concentrations measured by iso-kinetic dust sampling at the inlet and outlet point of HTF, the dust collection efficiency of HTF evaluated. The result met the designed performance value of 99.9%. During the demonstration tests including a hundred hour long test, no specific failure or problem affecting the performance of HTF system were observed.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1891-1894
• /
• 1999

We can classify the scratches after CMP process into micro-scratch and macro-scratches according to the scratch size, scratch intensity and defect map, etc. The micro-scratches on wafer after CMP process are discussed in this paper. From many causes, major factor that influences the formation of micro-scratch is known as particle size distribution of slurry.(1) It is indefinite what size or type of particle can cause micro-scratch on wafer surface, but there is possibility caused by large particle over 1um. The best way for controlling these large particle to inflow is to use the slurry filter on POU(Point of user). But the slurry filter(especially, depth-type filter) has sometimes the problem which makes more sever micro-scratches on wafer surface after CMP. We studied that depth-type slurry filter has what kind of week-points and the number of scratch could be reduced by lowering slurry flow rate and by using high spray bar which sprays DIW on polishing pad with high pressure.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.3
• /
• pp.244-252
• /
• 2005

It is very interesting and important in the academic point of view and in practical use the hydrogen-induced phase separation(HIPS) which appears during hydrogen heat treatment. Since hydrogen can be removed very fast by pumping it out the hydrogen-induced new lattice phase which can not be obtained without hydrogen can be preserved as meta-stable state. In this study it has been investigated whether the HIPS appear in Pd-Al, Pd-Co, Pd-Cr, Pd-Ti, Pd-V and Pd-Zr alloys and discussed thermodynamic representation of the HIPS. The Pd alloys were arc-melted under argon atmosphere and remelted 4 or 5 times for homogenization. The alloys were annealed at 600$^{\circ}C$ under vacuum for 24 hrs and then subjected to pressure-composition isotherm measurements at 100$^{\circ}C$. The hydrogen heat treatment(HHT) of samples was carried out at 600$^{\circ}C$ under hydrogen pressure of 70 bar for 6 days and PC isotherms at 100$^{\circ}C$ were measured. By comparing the PC isotherms measured before and after HHT, occurrence of phase separation was determined. The experimental results showed that the HIPS appeared only in Pd-0.05Co alloy. For Pd-Co alloys with various composition the PC isotherms were measured. By adopting Park-Flanagan model for ternary thermodynamics the Gibbs free energy change for Pd-Co-H solid solution was calculated and subsequently with this the HIPS in Pd-Co alloy was explained fairly.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.246.1-246.1
• /
• 2010

본 연구는 바이오가스의 에너지효율성을 높이기 위한 연구로서 바이오가스 정제공정과 초저온액화공정을 통하여 액화바이오메탄을 생산하는 바이오가스 고질화기술개발 연구이다. 바이오가스 정제공정은 탈황, 제습, 흡착, 압축, $CO_2/CH_4$ 분리공정으로 구성하고, 초저온액화공정은 열교환기, $CO_2$ 제거설비, 질소냉매 공급공정으로 구성하여 혐기성소화조에서 발생하는 바이오가스($CH_4$ 농도: 60~65%, $H_2S$: 1,500~2,500ppm)를 $200Nm^3/hr$의 유량으로 인입시켜 액화바이오메탄을 생산하였다. 연구결과, 탈황공정에서는 가성소다 세정법을 이용하여 1,500~2,500ppm으로 인입되는 $H_2S$를 100ppm 이하로 제거한 후, 흡착법을 이용하여 $H_2S$를 완전히 제거하였다. 바이오가스에 포화된 수분은 냉각제습과 흡착제습공정을 통해 Dew point $-70{\sim}-90^{\circ}C$까지 제거하여 안정적으로 $CO_2/CH_4$ 분리공정에 인입시켰다. $CO_2/CH_4$ 분리공정은 흡착방식을 적용하여 $CH_4$ 순도가 95% 이상인 바이오메탄을 생산하였으며, 이때 메탄 회수율은 약 87%이였다. $CO_2$가 분리된 바이오메탄은 초저온액화공정을 이용하여 액화바이오메탄으로 전환시켰다. 이때 초저온액화공정은 Reverse Brayton cycle로 구성하였으며, 냉매로는 질소를 사용하였다. 액화바이오메탄의 생산은 바이오메탄을 등엔트로피과정인 단열팽창을 통하여 $-155{\sim}-159^{\circ}C$의 초저온으로 냉각되는 질소냉매와 열교환기에서 열교환시켜 이루어졌으며 그 생산량은 $3.46m^3$/day(1bar, $-161^{\circ}C$)이었다.

• Ecology and Resilient Infrastructure
• /
• v.4 no.1
• /
• pp.24-33
• /
• 2017

This study investigates the flow characteristics and bed changes with discharge using a two-dimensional numerical model, Nays2DH. The water depth at the outer part of curved channel is formed deeper from the narrow part after passing through the curved part. The point bar is developed in the wide section and water depth is shallow in the inside of the curved section. The flow is concentrated in the outer pater of the meandering section, which leads to the deep water. In the downstream section where the straight line formed, the flow is concentrated at the center of the bed. Alternating deep water and shallow places are generated due to the continuous formation of meandering. These characteristics are formed by the influence of strong two-stream flow in meandering stream. The dimensionless tractive force is also large in the region where the flow velocity is concentrated. However, in the narrow and sharp meandering river reaches, the pattern of bed changes and the spatial distribution patterns of flow velocity and dimensionless tractive force are inconsistent in the narrow and sharp meandered reaches due to the strong secondary flow.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.309-315
• /
• 2017

Objectives: This study assessed the effect of water storage on the flexural strength (FS) of low shrinkage composites. Materials and Methods: A total of 165 bar-shaped specimens ($2{\times}2{\times}25mm$) were fabricated of 2 low shrinkage composites (Filtek P90 [3M ESPE], GC Kalore [GC International]) and a conventional methacrylate-based composite (Filtek Z250 [3M ESPE]). The specimens were subjected to 3-point bending test at 6 time intervals, namely: immediately after curing, at 24 hours, 1 week, 1 month, 6 months, and 1 year following storage in wet and dry conditions. The FS of the specimens were measured by applying compressive load at a crosshead speed of 1.0 mm/min. Data was analyzed using 3-way analysis of variance (ANOVA) and Tukey's test. Results: Three-way ANOVA revealed significant interactions between time, type of composite, and storage condition (p = 0.001). Tukey's multiple comparison test revealed significant reductions in FS of all composites after 6 months and 1 year of storage in distilled water compared to dry condition. Conclusions: Filtek P90 showed the highest and GC Kalore showed the lowest FS after 1 year storage in distilled water. The immediate high strength of Filtek Z250 significantly decreased at 1 year and its final value was lower than that of Filtek P90.

• Genomics & Informatics
• /
• v.17 no.4
• /
• pp.39.1-39.20
• /
• 2019

Analyzing patterns in data points embedded in linear and non-linear feature spaces is considered as one of the common research problems among different research areas, for example: data mining, machine learning, pattern recognition, and multivariate analysis. In this paper, data points are heterogeneous sets of biosequences (composite data points). A composite data point is a set of ordinary data points (e.g., set of feature vectors). We theoretically extend the derivation of the largest generalized eigenvalue-based distance metric D_ij(γ₁) in any linear and non-linear feature spaces. We prove that D_ij(γ₁) is a metric under any linear and non-linear feature transformation function. We show the sufficiency and efficiency of using the decision rule $\bar{{\delta}}_{{\Xi}i}$(i.e., mean of D_ij(γ₁)) in classification of heterogeneous sets of biosequences compared with the decision rules min_𝚵iand median_𝚵i. We analyze the impact of linear and non-linear transformation functions on classifying/clustering collections of heterogeneous sets of biosequences. The impact of the length of a sequence in a heterogeneous sequence-set generated by simulation on the classification and clustering results in linear and non-linear feature spaces is empirically shown in this paper. We propose a new concept: the limiting dispersion map of the existing clusters in heterogeneous sets of biosequences embedded in linear and nonlinear feature spaces, which is based on the limiting distribution of nucleotide compositions estimated from real data sets. Finally, the empirical conclusions and the scientific evidences are deduced from the experiments to support the theoretical side stated in this paper.

• Journal of the Korean Society of Food Culture
• /
• v.19 no.3
• /
• pp.336-347
• /
• 2004

This study was conducted to investigate eating-out behavior patterns of youths, especially junior high and senior high school students. 1600 questionnaire surveys were distributed and 1487 were used for analysis. In order to consider regional differences as well as overall characteristics of youths' eating-out behaviors, the subjects were evenly sampled from north Seoul, south Seoul, big cities, middle/small cities and small towns. As for the frequency of eating-out, 62.7% of respondents answered once to twice per week. For the can of more than 5 times of eating-out per week, the respondents from south Seoul showed the highest frequency. For the case of no eating-out, the highest frequency was shown from the small towns. As for the most frequently visited place for eating-out, 33.6% of respondents answered Korean style restaurants, and 17.6% Boon-sik(Sanck-bar). Regarding the preference of Korean style restaurants, the highest rate was shown from the residents of big cities. For the question of when they eat out, 89.6% answered dinner and 6.3% lunch. For the question about reason of choosing particular restaurants, 61.5% of respondents referred to tastes and 16.6% price. For the question of the most important reason of eating out, 52.6% point out 'meal solution' and 25.6% 'for meeting.' As for the people accompanied when eating out, 67.2% of the respondents answered family. For the cost of eating out per person, 45.7% of the respondents spent 2000-4000 won for lunch; 31.1% spent 5000-10,000 won for dinner; 33.7% of the respondents spent more than 20,000 won for the special events. Regarding the regional differences of eating-out cost, respondents from south Seoul tended to spend the biggest amount of money for lunch, dinner and special day.

• The Korean Journal of Ecology
• /
• v.26 no.5
• /
• pp.255-261
• /
• 2003

To analyze ecological characteristics of the Ulmus pumila community, an on-the-spot survey was conducted in August, 1998 in the Dong River, Gangwon-do, South Korea. The Ulmus pumila community is partially distributed in Dong River's midstream and upper stream. Topographical characteristics of this community are significant in the point bar or sandbank of the river. The community is classified into two types, disturbed and non-disturbed types, by the effect of flooding. The Ulmus pumila community (bush forests of Siberian elms) is a representative community which forms riparian forests, but its distribution is rare in South Korea. Only in Dong River is the Ulmus pumila distributed enough to form a community, and none is known that is lager than this community in South Korea. The non-disturbance type progresses more homogeneously than the disturbance type because it is formed on riverside banks where it is affected less by flooding. We concluded that the Ulmus pumila community in this study area has characteristics of riparian forests. In South Korea, Ulmus pumila community can be regarded as important element of vegetation landscape constituting riparian forests. Specifically, these riparian forests are evaluated as high in conservation value due to their being formed spontaneously. Moreover, Dong River is regarded as the southern limit of Ulmus pumila, which has a northern origin. The species or community needs continuous interests and conservation countermeasures because there are limitations in its spread of distribution by natural or artificial efforts.