• 제목/요약/키워드: plumes

검색결과 128건 처리시간 0.026초

CAPTURE OF YELLOW DUST BLOW BY MODIS DATA

  • Song, Jie;Park, Jong-Geol;Yasuda, Yoshizumi
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.920-922
    • /
    • 2003
  • Large plumes of yellow send or yellow dust blow out over the Sea of Japan and the Japanese archipelago from mainland of China. In this study, the methodology to capture the perspective on the large Yellow dust storm by using MODIS data is discussed. As the typical image of yellow send, MODIS data obtained of April 8, 2002 were used in this study.

  • PDF

천음속 영역에서 과소 팽창 화염이 종안정성에 미치는 영향에 관한 연구 (Effects of Underexpanded Plume in Transonic Region on Longitudinal Stability)

  • 정석영;윤성준
    • 한국항공우주학회지
    • /
    • 제32권8호
    • /
    • pp.118-128
    • /
    • 2004
  • 화염에 의한 종방향 공력 특성의 변화를 해석하기 위하여 고형 화염 모형을 이용한 풍동 시험과 고형 화염 모형과 제트 화염 모델을 이용한 난류 유동 수치 해석을 실시하였다. 화염 경계면 근사 가법을 이용하여 산출한 형상을 본떠 화염 모형을 제작하였으며 제트 화염 모델링 기법을 이용하여 공기와 실제 화염의 열역학적 차이로 인한 오차를 보정한 공기 제트 화염을 생생하였다. 화염과 외부 공기의 간섭에 대해 난류 모델간의 비교를 통하여 정확도와 격자 의존성 등에서 Spalart-Allmaras 모델이 좋은 결과를 주었다. 수치 해석을 통하여 고형 화염 모형과 제트 화염의 차이를 분석하였으며, 실제 비행 시험에 대한 화염 영향을 분석하기 위하여 연소실과 대기 압력 비와 레이놀즈수에 따른 변화를 해석하였다.

대기 경계층 연직방향 확산의 지면 거칠기에 따른 변화에 관한 실험적 연구 (An Experimental Study on the Variation of Vertical Dispersion within Boundary Layer with Surface Roughness)

  • 박옥현;윤창옥
    • 한국대기환경학회지
    • /
    • 제16권3호
    • /
    • pp.237-246
    • /
    • 2000
  • An experimental study has been carried out using a rotating water channel in order to investigate the effect of surface roughness on the vertical dispersion of plume within boundary layer. Dispersion measurements of tracers released from two sources with different height at neutral conditions over various rough terrain ranging from rural to urban have been performed. Various values of roughness length were simulated by combining of 4 stream velocities and 3 roughness element conditions. Dispersion measurements have also been made for rough terrain where high buildings are locally concentrated. Values of $\sigma$z increase with roughness and this tendency appears to apply both cases of with and without locally concentrated high buildings. The comparisons of the Bowne's nomogram on $\sigma$2 vs x relationship and the measurements of $\sigma$2 with roughness show good accordance in $\sigma$2 distribution at stability D class over rural, suburban and urban terrain. For constant roughness length the $\sigma$2 values of plumes from lower source height are smaller than those of plumes from higher source at short downwind distance, but this relationship becomes reverse as distance increases. Crossing appears to be made before about 2km. The value of constant I in McMullen's equation $\sigma$2=exp [I+J(In x) + K(In x)2] appears to increase with roughness length, however, the relationships between other constants and roughness have been confirmed. The values of $\sigma$2 for various downwind distances, estimated by using an equation which is employed in ISC (Industrial Source Complex) dispersion model for areas where high buildings are locally assembled, are in accordance with measurements from water channel experiments.

  • PDF

The Kwinana Shoreline Fumigation Experiment in Western Australia, Australia

  • Yoon, I.H.;Sawford, B.L;Manins, P.C.
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 1996년도 봄 학술발표회 초록집
    • /
    • pp.22-22
    • /
    • 1996
  • ;The Kwinana Shoreline Fumigation Experiment(KSFE) took place in Fremantle, WA, Australia between 23 January and 8 February, 1995. All measurement systems performed to expectation. The CSIRO DAR(Division of Atmospheric Research) LIDAR measured plume sections from near the Kwinana Power Station(KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. Radiosonde and double theodolite sounding systems measured temperature, humidity, air pressure and wind structure at the coast(Woodman Point) and at the inland(ALCOA residue dump) site at intervals of roughly two hours. These were supplemented by mid afternoon soundings(radiosonde and single theodolite) by Department of Environmental Protection(DEP) at Swanbourne. The Flinders aircraft measured wind, turbulence and temperature structure of the atmospheric boundary layer, concentrations of $C0_2,\;0_3,\;S0_2\;and\;NO_x$ in the smoke plumes and surface radiation over both land and sea. CSIRO DCET(Division of Coal and Energy Technology) vehicle successfully interceptde many smoke plumes and using a range of tracers will be able to identify the various sources much of the time. Routine data from the DEP and Kwinana Industrial Council(KIC) air quality monitoring networks were also automatically logged. Murdoch University measured surface heat flux at Hope Valldy monitoring station and also at Wattleup monitoring station for the last five days. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminumgarnet(Nd:Y AG) laser operating at a fundamental wavelength of 1064 nm, with harmonics fo 532 nm and 355 nm. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detedted by a photomultiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The results of nine days special field observations are summarized in detail.etail.

  • PDF

한국형발사체 발사대시스템 화염유도로 개념 설계 (I) (Conceptual Design of KSLV-II Launch Complex Flame Deflector)

  • 오화영;강선일;김대래;이정일;엄형식;허환일
    • 한국추진공학회지
    • /
    • 제18권6호
    • /
    • pp.75-81
    • /
    • 2014
  • 우주발사체 이륙 시 발생하는 연소 후류에 의한 발사체 및 발사대 구조물에 대한 손상을 방지하기 위해 적절한 형상의 화염유도로가 구축되어야 한다. 화염유도로는 발사체로부터 배출되는 풀룸이 재순환되거나 역류가 발생하지 않는 적절한 형상으로 설계되어야 하며, 발사장 주변 여건과 운용되는 발사체의 엔진 특성이 반영되어야 한다. 본 논문에서는 한국형발사체 1단부 엔진 특성을 고려하여 화염유도로 기초 형상을 설계하였으며, 플룸을 추진제 연소가스 대신 공기로 가정한 전산유동해석을 통해 화염유도로 형상에 따른 연소 후류의 영향에 대해 분석하였다.

저수지의 수질 관리를 위한 간헐식 양수통형 인공 순환 장치의 설계 방법 개발 (Design Methods of Intermittent Deep Draw Aeration System for Reservoir Water Quality Management)

  • 서동일;송무석;황현동;이은형
    • 상하수도학회지
    • /
    • 제18권4호
    • /
    • pp.445-452
    • /
    • 2004
  • Intermittent deep draw artificial circulation system is one of the most widely used destratification systems to control algal bloom in reservoirs in Korea. However, there have been neither theoretical background of design criteria nor operation guide line for efficient application of the system available for such systems. A design method was developed to calculate required compressor capacity and number of circulation units considering physical interactions between stratified water layers and plumes induced by the intermittent deep draw artificial circulation system. The program was tested with data observed in Yeoncho Lake. The results indicated that the developed method can applied in the fields successfully. Further validation processes would improve design and operation methods.

해양방류구에서 방류된 Jet류의 방류모형 (Model of Jet Flow Dispersion Discharged from Ocean Outfalls)

  • 이정규
    • 물과 미래
    • /
    • 제20권4호
    • /
    • pp.279-284
    • /
    • 1987
  • 해양방류구에서 연직밀도구배가 있고, 임의의 수류의 방향과 속도를 가지고 흐르는 주변수중으로 방류되는 폐수의 초기 최소 희석도와 최종상승고를 예측하는 개선된 수학적 모형을 제시하였다. 밀도구배가 없는 균일한 수중에서 선분플륨의 방류실험을 통하여 얻은 결과를 이용하여 선형밀도구배를 가진 수중으로 방류되는 경우에 대한 해가 유도되었다. 유속, 유향, 밀도의 성층화 및 노즐의 형태에 대한 영향이 고찰되었으며 계산결과는 실험치와 비교되었다.

  • PDF

Enhancement of Aerosol Concentration in Korea due to the Northeast Asian Forest Fire in May 2003

  • In, Hee-Jin;Kim, Yong-Pyo;Lee, Kwon-H.
    • Asian Journal of Atmospheric Environment
    • /
    • 제3권1호
    • /
    • pp.1-8
    • /
    • 2009
  • Enhancement of aerosol optical thickness (AOT) and surface aerosol mass concentration in Korea for an active forest fire episode in Northeast Asia were estimated by Community Multi-scale Air Quality (CMAQ) model. MODIS/TERRA remote detects of fires in Northeast Asia for May 2003 gave a constraint for estimation of wildfire emissions with an NDVI distribution for recent five years. The simulated wildfire plumes and enhancement of AOT were evaluated and well resolved by comparing multiple satellite observations such as MODIS, TOMS, and others. Scatter plots of observed daily mean aerosol extinction coefficient versus $PM_{10}$ concentration in ground level in Korea showed distinctively different trends based on the ambient relative humidity.

오염물질 이동 추적을 위한 SF6 추적자 실험 분석과 모사 연구 (Analysis and Simulation of SF6 Tracer Experiments for Tracking the Pollutant Transport)

  • 김영성;조성호
    • 한국대기환경학회지
    • /
    • 제14권5호
    • /
    • pp.397-410
    • /
    • 1998
  • Tracer experiments were performed 4 times in December 1992 on the relatively flat terrain and nearby building area adjacent to the Taedok Science Town in Korea. Each experiment was continued for relatively short period of 1 or 2 hours with intermittent release of SF6 up to 2.07g/s at 10m height. Movement of tracer plume was tracked by a continuous tracer analyzer installed on an air monitoring van. Simulation with INPUFF was carried out to analyze and predict experiments. Measured profiles of tracer plume were narrow and sharp while predicted profiles by INPUFF were broad and slowly varied. Tracer plumes were detected at a short distance of 0.5 to 2.2 km mainly due to intermittent release and high value of lower detectable limit. Various experimental conditions were tested by INPUFF simulation in order to find desirable conditions. Higher wind speed and less variable wind direction could yield longer distance of plume tracking only when the lower detectable limit was sufficiently low. Distance of plume tracking was long and did not much depend on the lower detectable limit in stable atmospheric conditions.

  • PDF

複合因 擾亂 水槽를 이용한 대류 경계층에서의 연직방향 plume 확산에 관한 실험적 연구 (An Experimental Study on the Vertical Dispersion of Plume in Convective Boundary Layer Using a Composite Turbulence Water Tank)

  • 박옥현;서석진;이상훈
    • 한국대기환경학회지
    • /
    • 제15권5호
    • /
    • pp.639-647
    • /
    • 1999
  • Experimental methods of plume dispersion in convective boundary layer using a composite turbulence water tank have been established through (ⅰ) manufacturing of water tank system, (ⅱ) providing of tracer whose volatility is relatively low, (ⅲ) development of software for image processing of dispersed particles in fluid, and (ⅳ) application of appropriate similarity law. Using these methods, the vertical dispersion coefficient $$\sigma$_2$ at long distances on mesoscale and the centerline height $Z_c$ of plumes have been measured. Measurement of $$\sigma$_2$ have been validated through comparison with CONDORS field experiments, and analysed with respect to the intensity of heat flux and mechanical turbulence as well as plume release height. Downwind distance where plume center height approaches to final level has also been analysed in respect of these three parameters.

  • PDF