• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.151-158
• /
• 2006

Recently, as RC flat plate system is applied on high-rising building largely, necessity of all over research about lateral performance becomes a prominent. In this paper, It is estimated that performance of slab-column connection in flat plate system is inter-story drift index 3.6%. In addition, when R-factor is fixed in seismic design, it must be considered all system. Also Considering that plastic hinge propagation is not adjustable, R-factor should be applied bellow '5.5'.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.107-110
• /
• 2005

In general, post tensioned (PT) flat plate slab systems have been used as a Gravity Load Resisting System (GLRS) in buildings. Thus, these systems should be constructed with Lateral Force Resisting Systems (LFRS) such as shear walls and moment resisting frames. When lateral loads such as winds or earthquakes occur, lateral load resisting systems undergo displacement by which connected gravity systems experience lateral displacement. Therefore, GLRS should have some lateral displacement capacity in order to hold gravity loads under severe earthquakes and winds. Since there are the limited number of researches on PT flat plate slab systems, the behavior of the systems have not been well defined. This study investigated the cyclic behavior of post tensioned flat plate slab systems. For this purpose, an experimental test was carried out using 4 interior PT flat plate slab-column specimens. All specimens have bottom reinforcement in the slab around the slab-column connection. Test variables of this experimental study are vertical load level and tendon distribution patterns.

• 대한토목학회논문집
• /
• 제31권3C호
• /
• pp.103-108
• /
• 2011

본 연구에서는 대변형율 시험을 위한 공진주/비틂전단 시험기의 한계점과 해결방안을 기술하였다. 대변형율 시험의 세가지 한계점은 첫째, 시험기의 제한된 회전거리이며 둘째, 시험기의 제한된 비틂력과 셋째, 변형측정 시스템의 한계 등이 있다. 대변형율 시험의 제한요소 중에서 시험기의 제한된 회전거리를 해결하기 위하여 시료 받침대를 개량하였으며 비틂력을 향상 시키기 위하여 가진기 팔의 개수를 증가시키고 가진기 코일의 연결방법을 변경하여 보다 강한 비틂력을 얻을 수 있었다.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.482-490
• /
• 2013

무량판 슬래브 구조는 시공의 단순함과 낮은 층고, 그리고 다양한 평면구성의 용이함으로 인하여 구조적으로 효과적이나 슬래브-기둥 접합부가 중력하중에 의한 펀칭전단파괴와 횡하중의 불균형모멘트에 의한 편심전단파괴에 취약한 단점이 있다. 이러한 무량판 슬래브의 취약점을 방지하기 위하여 많은 보강공법들이 개발되었으나, 보강공법들은 구조적 성능과 경제성, 그리고 시공성을 모두 만족시키기지는 못하고 있다. 이 논문에서는 래티스를 이용한 무량판 구조의 슬래브-기둥 접합부 보강공법을 제시하였다. 주기하중 실험을 통하여 래티스 보강공법의 구조적 성능을 증명하였으며 같은 구조설계 조건에 대하여 스터럽과 스터드레일, 그리고 래티스를 이용한 공법을 적용해 봄으로써 경제성을 입증하였다.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.481-490
• /
• 2005

본 논문은 중력하중의 지배를 받는 CFT기둥-RC 무량판 접합부의 실물대 실험결과를 요약한 것이다. CFT구조는 여러 가지 구조 및 시공상의 장점으로 인하여 국내 건설 현장에서 상대적으로 짧은 시간에 폭넓게 수용되고 있다. 주차장 용도로 주로 사용되는 지하층은 철근콘크리트 무량판으로 시공하여 경제성을 도모하는 것이 국내에서 일반적으로 요구되는 시공관행이다. 그러나 CFT기둥-RC 무량판 접합부의 효율적인 디테일은 아직 국내 외적으로 제시된 바가 없어서 이 분야의 연구가 매우 필요한 실정이다. 현장 시공시 경제성을 극대화할 수 있는 몇 가지 전략을 기초로 해서, 여러 가지 접합 상세를 제안하였고 실험을 통하여 검증하였다. 실험결과 본 연구에서 제시된 CFT기둥-RC 무량판 접합 상세의 펀칭강도 및 강성이 RC 무량판 접합부와 동등하거나 이를 상회하는 것을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권1호
• /
• pp.147-155
• /
• 1999

The purpose of this study is to investigate the strength and ductility of reinforced concrete columns subject to axial load experimentally for several variables of reinforcements and propose foundational research date for reinforcement design of column. In the test a total of eleven specimens, which are all $20{\times}20{\times}60cm$ in size and differently reinforced with steel plate, has been used. The main variables of reinforcement considered in the test are the width of steel plate, the thickness of steel plate. Based on the test results, the effect of the main variables on the strength and ductility of reinforced concrete column have been scrutinized. The strength of reinforced concrete columns are that C-2 series on strengthed with 2mm thickness steel plate are smaller than C-4 series on strengthed with 4mm steel plate. Thick steel plate of reinforced expected utilizer than the other on strength increase and specimens to be large width steel plate of each system are the utiltzer on strength increase. Ductility of C-0 specimen is 1.60, C-2 series is 2.38, C-4 series 2.63 Compare efficiency of ductility increase with each specimens, in narrow width condition (2cm, 4cm) C-2 series is more efficiency, in wide width condition (8cm, 10cm) C-4 series is more efficiency.

• Steel and Composite Structures
• /
• 제11권4호
• /
• pp.291-305
• /
• 2011

The new structure consisting of continuous compound spiral hoop reinforced concrete (CCSHRC)column and steel concrete composite (SCC) beam has both the advantages of steel structures and concrete structures. Two types of beam-to-column connections applied in this structural system are presented in this paper. The connection details are as follows: the main bars in beam concrete pass through the core zone for both types of connections. For connecting bar connection, the steel I-beam webs are connected by bolts to a steel plate passing through the joint while the top and bottom flanges of the beams are connected by four straight and two X-shaped bars. For bolted end-plate connection, the steel I-beam webs are connected by stiffened extended end-plates and eight long shank bolts passing through the core zone. In order to study the seismic behaviour and failure mechanisms of the connections, quasi-static tests were conducted on both types of full-scale connection subassemblies and core zone specimens. The load-drift hysteresis loops show a plateau for the connecting bar connection while they are excellent plump for bolted end-plate connection. The shear capacity formulas of both types of connections are presented and the values calculated by the formula agree well with the test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.77-80
• /
• 2005

Recently the construction of high-rise hybrid type building is progressively increased as the social demands. It is significantly important factors such as economy, the safety of structure, and the flexibility of internal space. Therefore new hybrid structural system, using slim flat plate system, is also required to be attained the reduction of story height, the flexibility and efficient use of space. The most suitable structural system is ,with the economy and flexibility, flat plate system in high-rise hybrid type building. But it was focused in the seismic performance for high performance flat plate system in high-rise hybrid type building. Therefore, in the study, to develop the new flat-plate system with high ductile, durable, good performance for the applications. It was evaluated the seismic performance in the critical region of slab-column connection. And then high performance flat plate system, designed by the economy and safety, was developed as a new technique in the application of high-rise hybrid type building.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.735-751
• /
• 2014

In the previous paper, authors proposed the unified equivalent frame method (UEFM) for the lateral behavior analysis of the flat plate structure subjected to the combined gravity and lateral loads, in which the rotations of torsional members were distributed to the equivalent column and the equivalent slab according to the relative ratio of gravity and lateral loads. In this paper, the lateral behavior of the multi-span flat plate structures under various levels of combined gravity and lateral loads were analyzed by the proposed UEFM, which were compared with test results as well as those estimated by existing models. In addition, to consider the stiffness degradation of the flat plate system after cracking, the stiffness reduction factors for torsional members were derived from the test results of the interior and exterior slab-column connection specimens, based on which the simplified nonlinear push-over analysis method for flat plate structures was proposed. The simplified nonlinear analysis method provided good agreements with test results and is considered to be very useful for the practical design of the flat plate structures under the combined gravity and lateral loads.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.194-202
• /
• 2006

최근 시공적, 계획적 측면에서 많은 장점을 가지는 무량판 구조형식이 고층주거건물의 구조형식으로 많이 사용되고 있다. 특히 국내에서 건설되고 있는 무량판 구조시스템은 횡력에 대한 저항성을 크게 하기 위하여 기둥의 단면이 매우 큰 직사각형 형태를 가지는 벽기둥을 사용하는 경우가 많으므로 구조해석을 위한 강성산정시 이러한 기둥의 형태적 요소를 적절히 반영해야 한다. 본 연구에서는 무량판 시스템 강성산정에 가장 일반적으로 이용되는 유효보폭산정법을 실험연구와 수치해석을 통하여 분석하였다. 분석결과, 유효보폭식을 사용하여 무량판 구조시스템의 강성을 산정할 경우, 하중가력방향 기둥폭이 큰 경우에 있어서 시스템의 강성을 과대평가하며 기둥형태에 따른 강성평가가 합리적으로 이루어지지 못함을 밝혀내었다. 본 연구에서는 기둥단면형상에 의해 변화되는 무량판 시스템의 강성을 합리적으로 계산할 수 있도록 기존 유효보폭식을 개선하였다.