• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.382-388
• /
• 2007

Statement of problem. The role of calcium sulfate in stimulating the growth of gingival soft tissue has been reported in few studies. Such a unique property of calcium sulfate could serve as a trouble-solving broker in compensating for the lack of soft tissues in various oral surgeries. Purpose. The purpose of this study was to compare the proliferating activities of human gingival fibroblasts seeded on various bone graft barrier materials of calcium sulfate, collagen, and polytetrafluorethylene (PTFE). Material and methods. Two calcium sulfates ($CAPSET^{(R)}$. and $CalForma^{(R)}$, Lifecore Biomedical Inc., St. Paul, Minnesota, USA), a resorbable natural collagen ($Bio-Gide^{(R)}$, Geistlich Pharma Ag., Wolhusen, Switzerland), and a non-resorbable PTFE ($TefGen-FD^{(R)}$, Lifecore Biomedical Inc., St. Paul, Minnesota, USA) served as the human gingival fibroblasts' substrates and comprised the four experimental groups, whereas the untreated floors of culture plastics were used in the control group, in this study. Cells were trypsinized, seeded, and incubated for 48 h. The proliferating activities of fibroblasts were determined by XTT and SRB assay and absorbance (optical density, OD) was measured. One-way ANOVA was used to analyze the differences in the mean OD values between the groups of CAPSET, CalForma, Bio-Gide, TefGen, and the control (p<0.05). Results. From the XTT assay, the mean OD value of the control group, the highest, was significantly greater than that of any of the four experimental groups followed by CalForma, CAPSET, TefGen, and Bio-Gide. Further, the mean OD value of CalForma, was significantly greater compared to that of Bio-Gide. From the SRB assay, Calforma showed the highest mean OD value, which was significantly greater than that of any other groups, followed by the control, CAPSET, Bio-Gide, and TefGen. The mean OD values of both the control and CAPSET were significantly greater compared to that of TefGen (p<0.05). Conclusion. Assessment of the viability and proliferation of cultured fibroblasts seeded and incubated for 48 h on various barrier-material substrates using XTT and SRB assay showed that calcium sulfate $CalForma^{(R)}$ promotes the proliferating activity of human gingival fibroblasts.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.5
• /
• pp.64-72
• /
• 2007

This study investigated the types, forms, and origination of litter found along one hiking course in Moaksan Provincial Park, 'Jungin-ri Course'(entrance-ridge-valley-peak). In addition, a survey was conducted to understand hikers' litter control awareness in order to determine possible backcountry litter control measures. The following are the results of this study: 1. For the litter Sequency investigation, 199 recyclable pieces of litter were found on the mid-slope(61.6%), 89 by the entrance(27.6%), 19 in the valley(5.9%) and 16 on the peak(4.9%). A total of 323 pieces of litter were found. Paper materials were the most common, followed by plastic containers such as PET bottles and yogurt containers. Of particular interest, 288 papers and cans were found on the mid-slope(46.9%). By the entrance, more plastics and bottles were found. 2. There were 614 pieces of flammable litter collected and only 19 pieces of non-flammable. Most of the flammable litter, including snack pacts, plastic bags, processed lumber, cigarette butts, tissues, cigarette boxes, and fabric was found on the mid-slope. 3. Very little food waste was found throughout the whole site proving that the policy prohibiting hikers from cooking and eating at the designated sites has been effective. However, food waste is difficult to find because it naturally decays with time. 4. $X^2$-test was used to find different types of litter and their verified origination frequency. It was found that recyclable litter, and food waste took about 1%. In addition, recyclable litter, especially bottles, was found relatively frequently by the entrance. Flammable litter was found most often at the peak. 5. The questionnaire results showed that 48.2% of the respondents "shorten their hiking journey and purchase food outside the entrance" and 29.6% said that they "bring a packed meal from home". Only 8.2% said that they "cook something when an appropriate location is found". At the Jungin-ri course, a few hikers brought their own food to eat or cook, but most hikers purchased something to eat onsite. 6. The results of the question about having experience littering while hiking showed that 19.3% litter and 79.2% do not. Those that responded "yes" gave various reasons for littering. 63.6% claimed, "there are no designated trash containers". 15.9% said they litter subconsciously. Finally, 3.2% insist that they litter "because food naturally decomposes". 7. As a result of the overall satisfaction according to the Likert scale and the analysis with an average of 14 variables, it was found that the average "toxic litter control convenience" was 2.41 with very low satisfaction. Thus, the results indicate the importance of providing appropriate back country litter control facilities.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.48-55
• /
• 2006

This study was carried out for establishing the physical recycling technique for commercializing process on household batteries. The procedure involves shape separator, crushing, magnetic separation, classification and eddy current separation in sequence. The separation capacity was 400-600 unit cell/hr with shape separation system. The impurities such as manganese and zinc in the magnetic product were below 0.1% respectively, the concentration of iron was above 99% in spent carbon zinc battery. Also non-magnetic products are composed of 22-30% En, 16-22% Mn, 1-3% Fe in the case oi spent zinc carbon battery. The amounts of other components such as carbon rod, plastics and separator were about 37-50%. From the eddy current separation of nonferrous products, the plate-type zinc components were separated up to 96% with 2,250-2,750 meter/min of the conveyor speed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.67-75
• /
• 2013

E-TPE (Engineering Thermoplastic Polyether Ester) was Ester Elastomer with functional groups as recycling and fast processability. In addition, if the car's lightweight enough to highlight eco-friendly materials that help to improve fuel economy has become. Have all the attributes of the rubber and engineering plastics E-TPE the available temperature area is spacious, heat resistance and oil resistance is excellent but getting attention as a new material in the field of auto parts in the field of electrical and electronic domestic depends entirely on imports by the lack of core technology and has been research and development is urgently needed. In this study, the hard segments, polyester (TPEE) as the base soft elastomers of the segments Ethylen-prophylene-Copolymer and CSM (Choloro sulphonated polyethylene Rubber), VAMAC (Ethylene Acrylic Rubber), NBR (Acrylonitrin Butadiene Rubber), 1, 3-Phenylene-bisoxazoline is dealing with Dynamic Vulcanized by content and added rubber properties, thermal variation observed. As a result, the properties of the dynamic vulcanization with NBR compared to other rubber heat resistance and oil resistance is on the increase.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.40-51
• /
• 2013

In order to develop a quantitation method for Perfluorooctanesulfonic acid(PFOS) contained in plastics that are mainly used in electric and electronic equipment, this study consisted of conducting method validations with LDPE samples using soxhlet solvent extraction and LC/MS. As a result, the limits of detection and quantitation (LOD, LOQ) were $2.58{\mu}g/L$ and $7.82{\mu}g/L$, respectively. Additionally, the recovery was 96-102%. For the correlation coefficient of LC/MS, the $r^2$ value was 0.9992 in the concentration range of $7.82-100{\mu}g/L$, which confirmed its linearity. Furthermore, for the standardization of the analysis method for PFOS in electric and electronic equipment to correspond to EU environmental regulations, we conducted a proficiency test with a number of domestic and international testing laboratories. Three of the ten testing laboratories that participated in the proficiency test submitted outliers. Accordingly, we examined the cause of the outliers using the $^{19}F$ NMR, finding that the main cause was an error in the processing of the results for isomers in PFOS that existed in standard solutions and samples.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.349-357
• /
• 2019

Finite element method (FEM) is utilized in the development of products to realistically analyze and predict the mechanical behavior of materials in various fields. However, the approach based on the numerical analysis of glass fiber reinforced plastic (GFRP) composites, for which the fiber orientation and strain rate affect the mechanical properties, has proven to be challenging. The purpose of this study is to define and evaluate the mechanical properties of glass fiber reinforced plastic composites using the numerical analysis models of Digimat, a linear, nonlinear multi-scale modeling program for various composite materials such as polymers, rubber, metal, etc. In addition, the aim is to predict the behavior of realistic polymeric composites. In this regard, the tensile properties according to the fiber orientation and strain rate of polybutylene terephthalate (PBT) with short fiber weight fractions of 30wt% among various polymers were investigated using references. Information on the fiber orientation was calculated based on injection analysis using Moldflow software, and was utilized in the finite element model for tensile specimens via a mapping process. LS-Dyna, an explicit commercial finite element code, was used for coupled analysis using Digimat to study the tensile properties of composites according to the fiber orientation and strain rate of glass fibers. In addition, the drawbacks and advantages of LS-DYNA's various anisotropic material models were compared and evaluated for the analysis of glass fiber reinforced plastic composites.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.114-120
• /
• 2012

The purpose of this study was to evaluate the antibacterial activities of chopping boards made of various materials such as three antibiotic plastics, a general plastic, and various woods (red pine, rubber tree, cypress, birch, and bamboo) using zone inhibition assay and real-time PCR. Wood chopping boards showed high antimicrobial activity against Vibrio vulnificus, while plastic chopping boards showed high antimicrobial activity against Escherichia coli O157:H7, Salmonella Typhimurium, and Staphylococcus aureus. Bamboo chopping board among the wood chopping boards showed the highest antimicrobial activity against five foodborne bacteria such as E. coli O157:H7, S. Typhimurium, Vibrio cholerae, and V. vulnificus. These results may be helpful in the selection of a chopping board with high antimicrobial activity and in the application of hygiene procedures for prevention of cross-contamination.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1158-1163
• /
• 2006

Bisphenol A (BPA), 2,2-bis(4-hydroxyphenyl) propane, has been widely used as a monomer for production of epoxy resins and polycarbonate plastics, and final products of BPA include adhesives, protective coatings, paints, optical lens, building materials, compact disks and other electrical parts. Since BPA is a toxic chemical to elicit acute cell cytotoxicity and chronic endocrine disrupting activity, the degradation of BPA has been focused during last decades. To overcome the problem of photo-, and chemical-degradation of BPA, in this study, a bacterium that is able to biodegrade BPA, was isolated. The bacterium, isolated froln the soil of plastic factory, was identified as Acinetobacter calcoaceticus (strain BP-2) based on physiological and 16S rDNA sequencing analysis. A. calcoaceticus BP-2 was able to grow in the presence of $1140{\mu}g\;ml^{-1}$ BPA. Biodegradation experiments showed that BP-2 mineralized BPA via 4-hydroxybenzoic acid and 4-hydroxyacetophenone, and average degradation rate was $53.3{\mu}g\;ml^{-1}\;day^{-1}$ under optimal conditions (pH 7 and $30^{\circ}C$). In high density resting cell $(3.5g-dcw.1^{-1})$ experiments, the maximal degradation rate was increased to $89.7{\mu}g\;ml^{-1}\;h^{-1}$. Our results suggest that BP-2 has high potential as a catalyst for practical BPA bioremediation.