• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.261-264
• /
• 2000

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li polymer battery. This paper describes temperature dependence of conductivity, impedance spectroscopy, electrochemical properties of PAN/PVDF electrolytes as a function of a mixed ratio. PAN/PVDF based polymer electrolyte films were prepared by thermal gellification method of preweighed PAN/PVDF, plasticizer and Li salt. By adding PVDF and as a function of plasticizer mixed ratio to PAN-LiClO4 electrolyte, its conductivity was higher than that of PAN-$LiClO4_4$ electrolyte. The conductivity of PAN/PVDF electrolytes was $10^{-3}S/cm$. $10PAN10PVDFLiClO_4PC_5EC_5$ electrolyte shows the better conductivity of the others. Steady state current method and ac impedance used for the determination of transference numbers in PAN/PVDF electrolyte film. The transference number of $10PAN10PVDFLiClO_4PC_5EC_5$ electrolyte is 0.45.

• 폴리머
• /
• 제26권6호
• /
• pp.778-784
• /
• 2002

덱스트란 용액으로 필름을 제조하여 여러 가지 특성들을 살펴보았으며, 가소제 및 가교제를 첨가하거나 저온 플라스마로 표면을 처리함으로써 이러한 특성들을 향상시킬 수 있는 지를 살펴보았다. 덱스트란 필름은 기계적 강도는 우수하였으나 부스러지기 쉽고 수분에 대단히 약한 특성을 보였다 가소제를 첨가할 경우에는 유연성이 크게 개선되는 대신에 기계적 강도가 크게 약화되었다. 하지만, 가소제를 첨가한 다음 가교제로 가교시키거나 함께 첨가할 경우에는 비교적 우수한 기계적 강도와 함께 유연성을 지닌 필름이 제조되었으며, 수분에 대한 저항성도 향상되었다. 또한, 아세틸렌 플라스마로 처리할 경우 필름 자체의 특성은 크게 변하지 않으나 친수성인 표면이 소수성으로 바뀌었다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.418-425
• /
• 2020

In this study soft computing techniques including, Artificial Neural Network (ANN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) were investigated for the prediction of Cr(VI) transport efficiency by novel Polymer Inclusion Membranes (PIMs). Transport experiments carried out by varying parameters such as time, film thickness, carrier type, carier rate, plasticizer type, and plasticizer rate. The predictive performance of ANN and ANFIS model was evaluated by using statistical performance criteria such as Root Mean Standard Error (RMSE), Mean Absolute Error (MAE), and Coefficient of Determination (R²). Moreover, Sensitivity Analysis (SA) was carried out to investigate the effect of each input on PIMs Cr(VI) removal efficiency. The proposed ANN model presented reliable and valid results, followed by ANFIS model results. RMSE and MAE values were 0.00556, 0.00163 for ANN and 0.00924, 0.00493 for ANFIS model in the prediction of Cr(VI) removal efficiency on testing data sets. The R² values were 0.973 and 0.867 on testing data sets by ANN and ANFIS, respectively. Results show that the ANN-based prediction model performed better than ANFIS. SA demonstrated that time; film thickness; carrier type and plasticizer type are major operating parameters having 33.61%, 26.85%, 21.07% and 8.917% contribution, respectively.

• 한국자기공명학회논문지
• /
• 제9권2호
• /
• pp.103-109
• /
• 2005

New PVC plasticizer, 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate was synthesized via simple esterification with butyric acid and Texanol(a trademark of Eastman Chemicals), the mixture of 2,2,4-trimethyl-1,3-pentanediol-3-isobutyrate and 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate. The analysis of $^1H-1D,\;^{13}C-1D$ NMR and HMBC spectra identified internal-ester-transfer of 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate during the reaction. 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate gave better properties in PVC than 2,2,4-trimethyl-1,3-pentanediol diisobutyrate(TXIB, a trademark of Eastman Chemicals) such as lower viscosity, higher tensile strength and better elongation. In particular, remarkably reduced migration compared with TXIB suggested a reduced emission of VOC(volatile organic compound) from PVC.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.220-224
• /
• 2019

Herein, three polymer compounds were manufactured using three polymer combination methods, ethylene-vinyl acetate/ethylene-propylene-diene-copolymer (EPDM), ethylene-vinyl acetate (EVA)/polyethylene-A (PE-A; density: 0.870), and ethylene-vinyl acetate (EVA)/polyethylene-B (PE-B; density: 0.885), for making cable sheath for use in the shipping industry. In this study, EVA, EPDM, PE-A, and PE-B were used as matrix polymers, and EVA-grafted maleic anhydride was used as a coupling agent for compounding with various compounds such as a fire retardant, cross-linking agent, filler, and other additives, besides the plasticizer. ${\Delta}T$, Mooney viscosity, and tensile strength increased in order of EPDM < PE-A < PE-B, the probable reason is due to the different crosslinking effect. The three compounds showed similar results for fire resistance and aging resistance after compounding process, but they showed excellent cold resistance owing to the non-polarity of the polymers and sufficient plasticizer content.

• 한국식품영양과학회지
• /
• 제44권2호
• /
• pp.260-267
• /
• 2015

본 연구에서는 장용성 연질캡슐 코팅가소제로서 PEG(polyethylene glycol)의 활용가능성에 대하여 알아보고자 PEG의 분자량 및 첨가 농도에 따른 코팅 품질을 확인하였으며, 기존에 보고된 가소제인 AMG(acetylated monoglyceride)와 triacetin을 사용하여 코팅된 장용성 연질캡슐의 품질 특성을 비교하였다. PEG 분자량(400, 4,000, 6,000)에 따른 코팅 품질에는 큰 차이가 없었으나 PEG 첨가 농도의 경우 고형분 대비 5% PEG를 사용한 코팅에서는 연질캡슐 피막 접착부에서 코팅 필름 갈라짐이 발생하였으며, PEG 첨가량이 낮을수록 인공장액에서의 붕해시간이 연장되고 백색도가 증가하는 결과를 나타내었다. 용출시험에서 용출의 초기 구간(30~90분)에서는 PEG의 용출 속도가 상대적으로 빠른 모습을 나타내었으며, PEG, AMG 및 triacetin 간의 유의적 차이가 일부 시점에서 관찰되었으나 전체적인 용출 양상은 큰 차이를 보이지 않았다. 또한 PEG 코팅에 비해 AMG와 triacetin 코팅의 경우 백색도가 유의적으로 높았고 가속조건인 고온다습한 환경에서 2개월간 보관 후에 코팅 필름이 갈라졌으며, 붕해시험에서 부적합한 결과를 확인하였다. 결론적으로 우수한 물리 화학적 특성으로 의약품 등에 널리 사용되는 첨가제인 PEG는 장용성 연질캡슐 코팅 가소제로서 활용가능성이 충분하다고 판단하였다.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2008년도 추계학술대회 논문집
• /
• pp.459-462
• /
• 2008

• Elastomers and Composites
• /
• 제29권3호
• /
• pp.213-225
• /
• 1994

The Purpose of this dissertation is to study the preparation technique and physical properties of expanded rubber. The respective samples of NR, NBR and the standard compounds of EPDM rubber were prepared by mixing plasticizer DOP and LCR in various ratio. And their vulcanization characteristics, physical properties and foaming states were studied. Vulcanization characteristics were investigated using cure curve that had been obtained from Oscillating Disk Rheometer study, and the microscopic photographs of foaming states were obtained using electron microscope. The vulcanization characteristics of the samples, DOP 30phr and LCR 30phr, were found to be suitable. The tests, like hardness test and resilience, tensile test on the physical properties of each sample showed that plasticizing efficiencies of DOP and LCR were almost the same. Oil resistance test exhibited DOP was better than LCR and compression set test showed LCR was excellent plasticizer. The foaming states of NR, EPDM compounds were uniform, but those of NBR compounds were not uniform. Consequently vulcanization characteristics, physical properties and foaming states of all the samples satisfied the SAE requirements.

• 한국포장학회지
• /
• 제8권2호
• /
• pp.18-26
• /
• 2002

Films of methylcellulose(MC), chitosan and their blends were prepared using water and acid solution as a solvent. The transition behavior and miscibility of polymers and their blends were characterized by dynamic mechanical analysis(DMA) and thermogravimetric analysis(TGA). The DMA analysis of PEG400/MC blends has shown that PEG400 was compatible with MC and was effective plasticizer since the curves of $tan{\delta}$ against temperature exhibited single peak, corresponding to single glass transition temperature, which were displaced to lower values with increasing PEG400 content. Results of DMA analysis and TGA analysis of MC/chitosan blends indicate that there are some miscibility between MC and chitosan in the blends, attributed to the similarities between two polysaccharides and interactions of two polymers in the blends. The inclusion of PEG400 in the blends increase the miscibility between two components in the blends.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.200-203
• /
• 2012

Epoxy/mica composite was synthesized, in order to use it as an impregnation resin in a vacuum pressure impregnation (VPI) process, for manufacturing a high voltage rotary machine. The average particle size of the mica was 5~7 ${\mu}m$ and its content was 0, 20, 30 and 40 wt%. A plasticizer or a low molecular aliphatic epoxy was also used, to decrease the viscosity of the composite. The AC electrical breakdown strength was estimated in sphere-to-sphere electrodes, and the electrical breakdown data were estimated by Weibull statistical analysis. The electrical breakdown strength became higher with the addition of mica; and that of the system with 20 wt% mica was highest. The electrical breakdown strength of the system with an aliphatic epoxy was higher than that of the system with a, plasticizer.