• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.2
• /
• pp.11-18
• /
• 1989

Advancement of surgical techniques has made it necessary to accurately diagnose internal derangements. Arthrography and computerized tomography have been used to diagnose the majority of temporomandibular joint disorders, however, these methods have had their disadvantages. Magnetic resonance imaging utilizing surface coils has greatly improved the ability to diagnose meniscus abnormalities without using intrarticular injections or ionizing radiation. Ninety-two patients (184 joints) were evaluated by means of magnetic resonance imaging(MRI). Thirty-one patients (39 joints) were diagnosed as having meniscus perforation. Retrospective review of fifteen patients (20 joints) with a perforated meniscus diagnosed by magnetic resonance imaging pre-operatively demonstrated a sixty-five percent correlation between the radiographic diagnosis and the surgical findings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.3
• /
• pp.189-197
• /
• 1993

Tempormandibular Joint pain and dysfunction is a common and important clinical problem. With the recent advances in imaging technology, radiologists have made major contribution to the understanding of TMJ disease. The MRI has several advantages over the conventional imaging methods. It is possible to obtain surprisingly precise images of internal hard and soft tissues with MRI. It is not invasive without ionizing radiation. The abnormal disk position has been thought as the cause of TMJ internal derangement. But there are few methods to relate disk position to TMJ internal derangement quantatively. The object of our study is to determine the amount of anterior displacement fo articular disk in symptomatic patients related each symptoms. Using the method of Dr. Drace, we studied the 38 joints of 22 persons with susceptable TMJ internal derangement. 1. In determining the anterior displacement of TMJ articular disk, the junction between the posterior band and bilaminar zone was useful. 2. The mean anterior displacement of disk in reduction group and without reduction group were $51.0^{\circ}C$ and $81.1^{\circ}C$ respectively. The difference was significant. 3. In the mean anterior displacement of disk, the pain without clicking group showed $84.8^{\circ}C$ and the clicking and pain group $70.8^{\circ}C$, the clicking group respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.109-116
• /
• 2016

The market share of high-speed railway vehicles is increasing across the world. A high-performance impact energy absorption factor is essential to satisfy the safety standards of railway vehicles. A deformed tube assembly is a typical energy absorption factor in railway vehicles. The tube assembly comprises a deformed tube and a press-fitting punch, its performance depends on the absorption energy characteristics in the plastic zone of the tube. In this study, a deformed tube assembly of a railway vehicle is designed that can absorb a maximum impact energy of 200kJ under plastic deformation. Slab method and finite element analysis are used to estimate the reaction force of the punch in the initial stage, the performance of the designed tube assembly is confirmed experimentally.

• Geotechnical Engineering
• /
• v.5 no.1
• /
• pp.47-60
• /
• 1989

Lateral earth Pressure distributions due to the ,randy soil backfill behind the rigid vertical walls for three different wall movement modes are obtained by the elasto-plastic finite element analys of soil deformation, and these earth pressures are compared with both Rankine's and Dubrova's active earth pressures. Thereby, the effects of the magnitude and the mode of wall displacement on the earth pressure distribution are investigated. Three different modes of wall movement considered in this study are the rotation about bottom, the rotation about top and the translation. For the case of the wall rotation about top, the earth pressure distribution is shown as a reverse S-curve-shaped distribution due to the arching effect. Consequently, the point of application of the lateral thrust is much higher than one-third of the wall height from the base. And, comparing the other modes of wall movement, the magnitude and the point of appliestion of the lateral thrust for the wall rotation about top are larger and higher, respectively. The wedge-shaped plastic zone in the backfill at active failure is developed only for the mode of wall rotation about bottom. The lateral earth pressure distributions on the walls with inclined backfill of several different slopes are shown for the mode of wall rotation about bottom.

• Geomechanics and Engineering
• /
• v.37 no.4
• /
• pp.383-393
• /
• 2024

Monopile foundations of offshore wind turbines embedded in soft clay are subjected to the long-term cyclic lateral loads induced by winds, currents, and waves, the vibration of monopile leads to the accumulation of pore pressure and cyclic strains in the soil in its vicinity, which poses a threat to the safety operation of monopile. The researchers mainly focused on the hysteretic stress-strain relationship of soft clay and kinds of stiffness degradation models have been adopted, which may consume considerable computing resources and is not applicable for the long-term bearing performance analysis of monopile. In this study, a modified cyclic stiffness degradation model considering the effect of plastic strain and pore pressure change has been proposed and validated by comparing with the triaxial test results. Subsequently, the effects of cyclic load ratio, pile aspect ratio, number of load cycles, and length to embedded depth ratio on the accumulated rotation angle and pore pressure are presented. The results indicate the number of load cycles can significantly affect the accumulated rotation angle of monopile, whereas the accumulated pore pressure distribution along the pile merely changes with pile diameter, embedded length, and the number of load cycles, the stiffness of monopile can be significantly weakened by decreasing the embedded depth ratio L/H of monopile. The stiffness degradation of soil is more significant in the passive earth pressure zone, in which soil liquefaction is likely to occur. Furthermore, the suitability of the "accumulated rotation angle" and "accumulated pore pressure" design criteria for determining the required cyclic load ratio are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.275-282
• /
• 2014

Particle-reinforced metal matrix composites exhibit a strengthening effect due to the particle size-dependent length scale that arises from the strain gradient, and thus from the geometrically necessary dislocations between the particles and matrix that result from their CTE(Coefficient of Thermal Expansion) and elastic-plastic mismatches. In this study, the influence of the size-dependent length scale on the particle-matrix interface failure and ductile failure in the matrix was examined using finite-element punch zone modeling whereby an augmented strength was assigned around the particle. The failure behavior was observed by a parametric study, while varying the interface failure properties such as the interface strength and debonding energy with different particle sizes and volume fractions. It is shown that the two failure modes (interface failure and ductile failure in the matrix) interact with each other and are closely related to the particle size-dependent length scale; in other words, the composite with the smaller particles, which is surrounded by a denser dislocation than that with the larger particles, retards the initiation and growth of the interface and matrix failures, and also leads to a smaller amount of decrease in the flow stress during failure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.423-430
• /
• 2013

In this research, a paramteric study to account for the effect of interfacial strength and nanotube agglomeration on the elastoplastic behavior of carbon nanotube reinforced polypropylene composites is performed. At first, the elastoplastic behavior of nanocomposites is predicted from molecular dynamics(MD) simulations. By combining the MD simulation results with the nonlinear micromechanics model based on the Mori-Tanaka model, a two-step domain decomposition method is applied to inversely identify the elastoplastic behavior of adsorption interphase zone inside nanocomposites. In nonlinear micromechanics model, the secant moduli method combined with field fluctuation method is used to predict the elastoplastic behavior of nanocomposites. To account for the imperfect material interface between nanotube and matrix polymer, displacement discontinuity condition is applied to the micromechanics model. Using the elastoplastic behavior of the adsorption interphase zone obtained from the present study, stress-strain relation of nanocomposites at various interfacial bonding condition and local nanotube agglomeration is predicted from nonlinear micromechanics model with and without the adsorption interphase zone. As a result, it has been found that local nanotube agglomeration is the most important design factor to maximize reinforcing effect of nanotube in elastic and plastic behavior.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.69-77
• /
• 2003

This paper presents test results on eight reduced beam section(RBS) steel moment connections. The testing program addressed bolted versus welded web connection and panel zone(PZ) strength as key variables, Specimens with medium PZ strength were designed to promote energy dissipation from both PZ and RBS regions such that the requirement for expensive doublet plates could be reduced. Both strong and medium PZ specimens with a welded web connection were able to provide satisfactory connection rotation capacity for special moment-resisting frames. On the other hand, specimens with a bolted web connection performed poorly due to premature brittle fracture of the beam flange of the weld access hole. If fracture within the beam flange groove weld was avoided using quality welding, the fracture tended to move into the beam flange base metal of the weld access hole. Plausible explanation of a higher incidence of base metal fracture in bolted web specimens was presented. The measured strain data confirmed that the classical beam theory dose not provide reliable shear transfer prediction in the connection. The practice of providing web bolts uniformly along the beam depth was brought into question. Criteria for a balanced PZ strength improves the plastic rotation capacity while reduces the amount of beam distortion ore also proposed.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.25-32
• /
• 2014

The amount of TPH contaminated soil treated at off-site remediation facilities is ever increasing. For the recycle of the treated-soil on farmlands, it is necessary to restore biological and physico-chemical soil characteristics and to remove residual TPH in the soil by an economic polishing treatment method such as phytoremediation. In this study, a series of experiments was performed to select suitable plant species and to devise a proper planting method for the phyto-restoration of TPH-treated soil. Rye (Secale cereale) was selected as test species through a germination test, among 5 other plants. Five 7-day-old rye seedlings were planted in a plastic pot, 20 cm in height and 15 cm in diameter. The pot was filled with TPH-treated soil (residual TPH of 1,118 mg/kg) up to 15 cm, and upper 5 cm was filled with horticulture soil to prevent TPH toxic effects and to act as root growth zone. The planted pot was cultivated in a greenhouse for 38 days along with the control that rye planted in a normal soil and the blank with no plants. After 38 days, the above-ground biomass of rye in the TPH-treated soil was 30.6% less than that in the control, however, the photosynthetic activity of the leaf remained equal on both treatments. Soil DHA (dehydrogenase activity) increased 186 times in the rye treatment compared to 10.8 times in the blank. The gross TPH removal (%) in the planted soil and the blank soil was 34.5% and 18.4%, respectively, resulting in 16.1% increase of net TPH removal. Promotion of microbial activity by root exudate, increase in soil permeability and air ventilation as well as direct uptake and degradation by planted rye may have contributed to the higher TPH removal rate. Therefore, planting rye on the TPH-treated soil with the root growth zone method showed both the potential of restoring biological soil properties and the possibility of residual TPH removal that may allow the recycle of the treated soil to farmlands.