• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1460-1468
• /
• 2005

Two possible shape memory processes, austenite to detwinned martensite transformation and twinned martensite to detwinned martensite transformation of a shape memory alloy have been modeled and examined. Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory is used for modeling of the shape memory processes of TiNi shape memory alloy reinforced aluminum matrix composite. The shape memory amount of shape memory alloy, plastic strain and residual stress in the matrix are computed and compared for the two processes. It is shown that the shape memory amount shows differences in a small prestrain region, but the plastic strain and the residual stress in the matrix show differences in the whole prestrain region. The shape memory process with initially martensitic state of the shape memory alloy would be favorable to the increase in the yield stress of the composite owing to the large compressive residual stress and plastic strain in the matrix.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.343-356
• /
• 2022

As a part of round robin analysis to develop a finite element elastic-plastic seismic analysis procedure for nuclear safety class 1 components, a series of parametric analyses was carried out on the simulated pressurizer surge line system model to investigate sensitivity of the analysis results to finite element analysis variables. The analysis on the surge line system model considered dynamic effect due to the seismic load corresponding to PGA 0.6 g and elastic-plastic material behavior based on the Chaboche combined hardening model. From the parametric analysis results, it was found that strains such as accumulated equivalent plastic strain and equivalent plastic strain are more sensitive to the analysis variables than von Mises effect stress. The parametric analysis results also identified that finite element density and ovalization option in the elbow elements have more significant effect on the analysis results than the other variables.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.220-227
• /
• 2006

In case of welding, the inherent strains are generated, because a structure experiences the plastic yielding. The inherent strain is defined as the irrecoverable strain after removing structural restraints and loading. For the analysis method of welding distortion, equivalent loading method based on inherent strain is in general use due to its efficiency and effectiveness. However, it is generally difficult to know the final strain of the welded structure if additional loadings were applied after welding. for this reason, this study introduced the concept of the hardening and added the hardening term to the equivalent loading method based on inherent strain. Therefore, the purposes of this study are to develop the inherent strain formula considering the hardening effect and to calculate residual Stresses Using Proposed inherent Strain. Also, this Study Verified the availability Of proposed inherent strain method by loading-unloading experiment on welded plate.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.69-76
• /
• 2018

The paper presents preliminary investigation results for the effect of the baseline correction in the acceleration excitation method on finite element seismic analysis results (such as accumulated equivalent plastic strain, equivalent plastic strain considering cyclic plasticity, von Mises effective stress, etc) of nuclear safety Class I components. For investigation, finite element elastic-plastic time-history seismic analysis is performed for a surge line including a pressurizer lower head, a pressurizer surge nozzle, a surge piping, and a hot leg surge nozzle using the Chaboche hardening model. Analysis is performed for various seismic loading methods such as acceleration excitation methods with and without the baseline correction, and a displacement excitation method. Comparing finite element analysis results, the effect of the baseline correction is investigated. As a result of the investigation, it is identified that finite element analysis results using the three methods do not show significant difference.

• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.289-296
• /
• 2023

The failure of a thin-walled tube was studied in this paper based on three failure models. Both proportional and non-proportional loading paths were applied. Proportional loading consisted of combined tension-torsion. Cyclic non-proportional loading was also applied. It was a circular out-of-phase axial-shear stress loading path. The third loading path was a combination of a constant internal pressure and a bending moment. The failure models under study were equivalent plastic strain, modified Mohr-Coulomb (Bai-Wierzbicki) and Tearing parameter models. The elasto-plastic analysis was conducted using J2 criterion and nonlinear kinematic hardening. The return mapping algorithm was employed to numerically solve the plastic flow relations. The effects of the hydrostatic stress on the plastic flow and the stress triaxiality parameter on the failure were discussed. Each failure model under study was utilized to predict failure. The failure loads obtained from each model were compared with each other. The equivalent plastic strain model was independent from the stress triaxiality parameter, and it predicted the highest failure load in the bending problem. The modified Mohr-Coulomb failure model predicted the lowest failure load for the range of the stress triaxiality parameter and Lode's angle.

• 콘크리트학회논문집
• /
• 제26권4호
• /
• pp.555-562
• /
• 2014

성능 기반 내진설계를 위해서는 지진후 건물의 사용성과 복원성에 대한 명확한 목표가 필요하다. 이를 위해서는 건물의 구성 재료의 검토가 필요하고, 특히, 부재에 잔류하는 변형을 지표로 사용하는 것은 유용하다. 프리스트레스트 콘크리트는 PC 강재의 원점지향적 성질 덕분에 많이 이용이 될 것으로 생각된다. 이 연구는 PSC 보부재의 잔류 변형을 연구하고 산정하는 것에 목표를 두고 있다. '등가 소성 힌지 길이법'을 바탕으로 위험단면에서의 곡률과 등가 소성 힌지 길이를 이용하여 부재의 변형각을 구하는 식을 유도한다. '분할 요소 해석법'을 통하여 PC강재와 콘크리트 사이의 부착-미끄러짐을 고려하면서 힘의 균형과 변형을 적합 조건을 만족하는 해석값을 도출했다. 잔류 변형률에 영향을 미치는 각종 요인들을 파라미터 스터디를 통하여 잔류 변형률 산정식에 필요한 각종 수치를 결정했다. 그중에서 잔류변형에 많은 영향을 미치는 피크시 등가 소성 힌지 길이, 잔류 변형시 등가 소성 힌지 길이 및 피크시부터 잔류 변형시에 발생하는 위험 단면 위치에서의 곡률 감소량에 대하여 중점적으로 검토를 실시했다. 이 연구 결과를 바탕으로 앞으로 활발한 연구가 진행되기를 기대한다.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.69-77
• /
• 1987

철근 콘크리트 구조물의 재료적 비선형 해석을 위해 유한요소법을 적용하였다. 2 축응력 상태에서의 콘크리트 거동은 인장균열과 균열사이의 인장증강효과(tension stiffening effect) 그리고 최대압축 강도를 넘어서의 변형연화(strain-softening) 효과를 고려하는 비선형 구성 방정식으로 나타냈다. 콘크리트를 직교성 (orthotropic) 재료로 가정함으로써 비선형 탄성체로 간주하고, 등가일축변형도 개념을 사용한 등가 일축 응력-변형도(equivalent uniaxial stress-strain) 관계식으로 모형화하고, 철근 보강재는 Bauschinger 효과를 갖는 탄소성 변형 경화재료(elasto-plastic strain-hardening material)로 모형화 했다. 평면 응력 상태에서 철근콘크리트 보의 모형화는 각 절점에 2 개의 자유도를 갖는 사각형요소로 모형화하여 적용 시쳤으며, 이로부터 구한 유한요소해석의 결과치를 실험결과치의 중앙처짐, 응력, 변형율 그리고 균열성장과정에 대하여 비교 검토 하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.805-816
• /
• 2015

In the present study, external restraints imposed normal to the plate during the cooling stage were determined to be effective for reduction of the angular distortion of butt-welded or fillet-welded plate. A welding analysis model under external force during the cooling stage was idealized as a prismatic member subjected to pure bending. The external restraint was represented by vertical force on both sides of the work piece and bending stress forms in the transverse direction. The additional bending stress distribution across the plate thickness was reflected in the improved inherent strain model, and a set of inherent strain charts with different levels of bending stress were newly calculated. From an elastic linear FE analysis using the inherent strain values taken from the chart and comparing them with those from a 3D thermal elasto-plastic FE analysis, welding deformation can be calculated.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.87-92
• /
• 2005

It has been well hewn that ductile fracture of steels is accelerated by triaxial stresses. The characteristics of ductile crack initiation in steels are evaluated quantitatively using a two-parameters criterion based on equivalent plastic strain and stress triaxiality. The present study focuses on the effects of strength mismatch, which can elevate plastic constraint due to heterogeneous plastic straining, on the critical condition for ductile fracture initiation usinga two-parameter criterion. Fracture initiation testing has been conducted under static loading using notched round bar specimens which had different notch locations. This study provides the fundamental clarification of the effect of strength mismatching and effect of notch location on the critical condition to ductile crack initiation from notch root using fuite element method and ultrasonic-mechatronics system. The critical condition of ductile crack initiation from notch root of strength mismatched tensile specimens under static loading appeared to be almost the same as those of homogeneous tensile specimens with circumferential sharp notch specimen. Also, the effect of notch location in mismatched specimens was estimated using finite element(FE) analyses.

• 한국자동차공학회논문집
• /
• 제2권4호
• /
• pp.50-58
• /
• 1994

To examine the residual stress field resulting from stamping process for the lower control arm of a car, the explicit finite element analysis is performed for the stamping process by way of the ABAQUS Explicit. The residual stress is obtained in terms of the Von Mises stress and other parameters such as equivalent plastic strain, the change of blank thickness, the final configuration of the blank and the spring back effect are also considered. Moreover, discussed is the convergence of the explicit FEM versus the punch sped and the element discretization