• Tribology and Lubricants
• /
• v.12 no.1
• /
• pp.22-28
• /
• 1996

This study was undertaken to investigate the dry wear characteristics and mechanism of KP-4M steel for plastic molding against SKD 61 hardened by heat treatment. The wear test was carried out under different conditions such as sliding speed, contact pressure, sliding distance, with frictional tester of pin on disc type. The wear loss on variation of sliding speed was little in lower speed range below 0.5 m/sec and in higher speed range above 1.5 m/sec,'but wear loss was high in intermediate speed range. The critical sliding speed, which showed the maximum value of specific wear rate, became lower with increased contact pressure. Increasing the contact pressure, the critical sliding distance Lcr which the wear mechanism changes from severe wear to mild wear was increased due to the decrease of oxidation reaction velocity. Through this study we suggested a model of generation and elimination process of wear debris of KP-4M steel for plastic molding.

• Journal of Species Research
• /
• v.5 no.3
• /
• pp.443-458
• /
• 2016

Ten new species of genus Sarcotragus (Demospongiae: Dictyoceratida: Irciniidae) are described from Geomundo Island and Jejudo Island, Korea. All new species of the Sarcotragus are distinguished from the other reported species of Sarcotragus by the skeletal structure, especially fasciculate primary fibres. The characters of genus Sarcotragus have cylindrical primary fascicles filled with wads of filaments or flattened fascicles. All of the primary fibres are not cored with foreign debris. Secondary fibres have slightly fasciculate branch or plastic-like web. They are all not cored with foreign debris. All skeletal fibres are very irregular. The surface is covered with loose or tight filamentous membrane.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.611-614
• /
• 2008

Purpose: Infection, foreign body reaction and decreased volume of implant are common complications after augmentation rhinoplasty with $Gore-tex^{(R)}$ implant. The author experienced two cases of recurrent foreign body granuloma in the patients who underwent $Gore-tex^{(R)}$ removal because of infection after augmentation rhinoplasty. and treated them with complete removal of$Gore-tex^{(R)}$. Methods: Case 1: A 49 year-old female visited our clinic for recurrent foreign body reaction on nasal dorsum and tip area. The patient underwent augmentation rhinoplasty with $Gore-tex^{(R)}$ 3 years ago and implant was removed due to infection 9 months ago. Excision of the granuloma was performed and a piece of foreign body suspicious to be a $Gore-tex^{(R)}$ implant debris was detected under the subcutaneous pocket. The implant fragments were removed and nasalis muscle rotation flap was performed to cover the lesion. The specimen was proved to be $Gore-tex^{(R)}$ in histological study. Case 2: A 31 year-old-male with recurrent foreign body granuloma on the nasal tip area visited our clinic. 10 years ago, the patient had augmentation rhinoplasty with silicone implant and then, he underwent revisional rhinoplasty five times including nasal implant removal, which was performed 9 months ago. The authors excised the granuloma and found a small sized foreign body suspicious to be a $Gore-tex^{(R)}$ implant debris under the granuloma. The foreign body was excised and identified to be $Gore-tex^{(R)}$ in histological study. Results: In both cases, the lesions were healed without any complications and there were no evidences of recurrence up to 6 months of follow-up. Conclusion: The $Gore-tex^{(R)}$ is known to be weak against mechanical force. These properties of $Gore-tex^{(R)}$ make it difficult to remove the implant completely. In the patient who have infection after augmentation rhinoplasty with $Gore-tex^{(R)}$, the operator should take care to perform the complete removal without remaining fragment of the implant.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.236-243
• /
• 2006

A series of surveys are performed to evaluate the abundance, composition and distribution of marine debris on the sea bed around the Busan port. In order to set up a master plan for the marine environmental pollution the relevant maritime authority must understand how many and w㏊t kinds of marine litters are distributed on the sea bed. At first we planed to survey areas divided regularly according to the coast line but there were many sea going vessels and fishing boats. So we selected and surveyed the around area where there were no sea going vessels or fishing boats.The obtained results are as follows: 1. The mean values of litters in number and weight are 5.8 pieces/㏊. and 3.5㎏/㏊. respectively. 2. The highest density in terms of number are vinyl and plastic item, and in weight are fishing gear and ship articles. 3. The nearer to the shore we surveyed the more we collected in terms of the density of marine litters in number and in weight per hectare. 4. Eel pot, oiled waste, rope, others, other pot and net of fishing gear litters in number were 59.9, 22.7, 7.9, 4.5, 3.1 and 1.9% respectively. 5. There is no relationship between the amount of fish caught and the amount of marine debris.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.7-20
• /
• 2017

In this study, effects of grain size distribution on the shear strength and rheological properties are investigated for coarse- and fine-grained soils by using direct shear apparatus. Shear strengths are estimated for fine-grained soils with the maximum particle size of 0.075 mm and coarse-grained soils with the maximum particle size of 0.425 mm and fine contents of 17% prepared at dry and liquid limit states. The direct shear tests are conducted under the relatively slow shear velocity, which corresponds to the reactivated landslide or debris flow after collapse according to the landslide classification. In addition, for the evaluation of rheological properties, residual shear strengths for both fine- and coarsegrained soils prepared under liquid limit states are obtained by multiple reversal shear tests under three shear velocities. From the relationship between residual shear strengths and shear rates, Bingham plastic viscosity and yield stress are estimated. The direct shear tests show that cohesions of fine-grained soil are greater than those of coarse-grained soil at both dry and liquid limit states. However, internal friction angles of fine-grained soil are smaller than those of coarse-grained soil. In case of rheological parameters, the plastic viscosity and yield stress of fine-grained soils are greater than those of coarse-grained soils. This study may be effectively used for the prediction of the reactivated landslide or debris flow after collapse.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.687-690
• /
• 2011

Purpose: Pemphigus vulgaris, a rare autoimmune blistering disease of the skin and mucous membranes remains a challenging disease to treat. Management is focused on immunotherapy against autoimmune antibodies that target keratinocyte cell adhesion molecules, and antibiotics preventing secondary infections. There is no established dressing protocol and skin is usually manipulated the least amount possible in order to minimize irritation. The authors suggest that early initiation of aggressive bathing and debridement of skin lesions, with nutritional support, is essential in accelerating resolution. Methods: A 40 year-old male previously diagnosed with pemphigus vulgaris was admitted due to exacerbation of mucocutaneous lesions involving the epidermis and mucosa of the whole body. Steroids, immunosuppressants, intravenous immunoglobulin and antibiotics were administrated, but infection and de-epithelialization progressed, while his general condition deteriorated with a weight loss of over 20 kilograms. The plastic surgery department intervened with daily bathing, debridement of unhealthy debris and non-traumatizing coverage of growing epithelium. Total parenteral nutrition and mobilization with rehabilitation therapy was initiated as early as possible. Results: After bathing, healthy epithelium gradually covered the patient's entire body, while his general condition improved with a corresponding weight gain of 14 kgs. Conclusion: Treatment of pemphigus vulgaris focuses on immunotherapy and infection control. However, an equal amount of attention should be laid on early intervention with daily dressings including bathing and irrigation, nutritional support, and exercise as this accelerates resolution of existing infections, promotes healthy epithelialization and leads to faster recovery.

• Korean Journal of Materials Research
• /
• v.15 no.12
• /
• pp.824-828
• /
• 2005

In this study the effect of the content of $TiB_2$ on wear properties was investigated. $Cu-TiB_2$ composites have been fabricated by hot extrusion. Sliding wear tests were peformed by a pin-on-disk type wear test machine under dry condition and loads varied with from 20N to 80N at sliding speed 3.5Hz. The test results showed that the wear losses and the friction coefficients decreased with increasing $Cu-TiB_2$ volume fraction and increasing the size of $Cu-TiB_2$ particle. Wear property of $10{\mu}m,\;5 vol\%\; TiB_2$ specimen was excellent all of the wear specimens. It is thought that the increase of plastic flow resistivity due to uniform distribution of $10{\mu}m,\;5 vol\%\; TiB_2$ wear specimen would improve wear property. The worn surface and wear debris were examined by optical microscope and scanning electron microscope.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.743-751
• /
• 2017

To evaluate the structural integrity of the helicopter radome, we performed bird strike analysis using SPH (Smoothed Particle Hydrodynamics) technique. Since the SPH method is a meshfree method, there is no phenomenon such as mesh tangling and it is suitable to predict the dispersion behavior of debris and debris cloud generated by high-speed impact. In order to observe the scattering direction of fractured bolts, the analysis were performed under the condition that the fracture occurs at the proof load. As a result of bird strike analysis, there is no secondary damage as well as the damage due to, the dispersion behavior of the bird model, and the scattering of the fractured bolts and radome. From the additional analysis that were performed to determine the actual bolt fracture, only plastic deformation is predicted since the maximum stress of the bolt does not exceed the ultimate stress.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1227-1240
• /
• 2014

Abandoned mines often cause environmental problems, such as alteration of landscape, metal contamination, and landslides due to a heavy rainfall. Geotechnical and rheological tests were performed on waste materials corrected from Imgi waste rock dump, located in Busan Metropolitan City. Debris flow mobility was examined with the help of 1-D BING model which was often simulated in both subaerial and subaqueous environments. To determine flow curve, we used a vane-penetrated rheometer. The shear stress (${\tau}$)-shear rate (${\dot{\gamma}}$) and viscosity(${\eta}$)-shear rate (${\dot{\gamma}}$) relationships were plotted using a shear stress control mode. Well-known rheological models, such as Bingham, bilinear, Herschel-Bulkley, Power-law, and Papanastasiou concepts, were compared to the rheological data. From the test results, we found that the tested waste materials exhibited a typical shear shinning behavior in ${\tau}$-${\dot{\gamma}}$ and and ${\eta}$-${\dot{\gamma}}$ plots, but the Bingham behavior is often observed when the water contents increased. The test results show that experimental data are in good agreement with rheological models in the post-failure stage during shearing. Based on the rheological properties (i.e., Bingham yield stress and viscosity as a function of the volumetric concentration of sediment) of waste materials, initial flowing shape (5 m, 10 m, and 15 m) and yield stress (100 Pa, 200 Pa, 300 Pa, and 500 Pa) were input to simulate the debris flow motion. As a result, the runout distance and front velocity of debris flow are in inverse propositional to yield stress. In particular, when the yield stress is less than 500 Pa, most of failed masses can flow into the stream, resulting in a water contamination.

• Research in Plant Disease
• /
• v.7 no.2
• /
• pp.107-111
• /
• 2001

Deterioration of pod and seed quality by pod and stem blight and purple blotch is a serious problem in the production of vegetable soybean. Major inoculum sources for the causal pathogens, Phomopsis spp. and Cercospora kikuchii, are soybean straw and debris. Phomopsis spp. have been known to be either limited for hyphal growth or latent in immature soybean tissues. In this experiment, cultural practices using these ecological traits of the pathogens were applied as a control measure. In plastic mulching, seed infection was remark ably reduced by drip irrigation as compared to overhead sprinkling, but not reduced in no mulching cultivation. Control value of plastic mulching was 28.0% for pod and stem blight and 29.3% for purple blotch, which was lower than that of benomyl application. By the first week in June, 78% of overwintered soybean straw examined contained matured alpha spores in pycnidia, acting as primary inoculum. Secondary inoculum of phomopsix spp. was observed abundantly throughout from mid June to September on fallen cotyledons from current crops and subsequently was found on petiole debris. Consequently, both plastic mulching and drip irrigation were effective to some extent for controlling pod and stem blight and purple blotch without significant reduction in soybean yield, and the cultural practices in combination with field sanitation resulted in removing more the secondary inoculum.