• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.264-269
• /
• 2012

Die slide injection marvelously reduces the cost and time in processing plastic products because they can simplify the conventional process through eliminating additional process. However, this process must resolve some defects like whitening, resin infiltration, blowhole, resin overflow, etc. In this study, the process parameters of the injection molding are optimized by using the finite element method and Taguchi method. The injection molding analysis is simulated by employing the Moldflow insight 2010 code and the 2nd injection is by adopting the Multi-stage injection code. The process parameters are optimized by using the $L_{16}$ orthogonal array and smaller-the-better characteristics of the Taguchi method that was used to produce an airtight container (coolant reservoir tank) from polypropylene (PP) plastic material.rodanwhile, the optimum values are confirmed to be similar in 95% confidence and 5% significance level through analysis of variance (ANOVA). rooreover, new products and old products were compared by mdasuring the dimensional accuracy, resulting in the improvement of dimensional stability more than 5%.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.285-297
• /
• 2007

As the demands of environment protection increase, the pulp mold container is developed to substitute for the plastic cushion materials like EPS(expanded poly styrene). The water-absorbing ratio, tensile strength and compressive strength of pulp mold are important factors to evaluate its shock absorbing characteristics. The study was performed to investigate the effects of the mechanical property changes on the various conditions of temperature and relative humidity for pulp mold containers made of mixed materials on ONP(old newspaper) and OCC(old corrugated container). This study also is evaluated the optimized mixing ratio of materials for making pulp mold by analyzing the changes of physical properties according to a various procured temperature and relative humidity conditions. The results show that the water absorption ratio of sample increased significantly, and tensile strength decreased $20{\sim}30%$, compressive strength decreased $10{\sim}20%$ by increasing relative humidity condition. And the results show that the ONP 50% and OCC 50% was optimized mixing ratio according to the samples.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.1
• /
• pp.97-105
• /
• 1997

This research follows the previous research on Kimchi Culture for the Koreans in Commonwealth of Independent States(CIS) and the purpose of this research was to investigate the habits with Kimchi of the Koreans in CIS. The research was carried out with items of the preparation and the preservation of Kimchi. The results were summarized as follows : 1. Abut 95% of above 30 years old of the respondents prepared Kimchi for their family. But 51.9% of under 30 years old and the forth generation of the respondents got Kimchi without self preparation. 2. All the respondents argued that the procedure of Kimchi preparation of the present indifferent from that of the past. 3. 40.2% of the respondents used to take Kimchi after 2~3 days from the preparation and 29.1% used to take after 1~2 days. 52.8% of the respondents would like to eat the well-matured Kimchi and 45.2% to eat Kimchi which was immediately prepared. 4. The most popular container for keeping was the enamel pot and the most popular places for keeping was the refrigerator. The popular keeping containers were a wooden box(61.2%), a earthen vessel(20.1%), a plastic vessel(14.7%) and the popular keeping places were a underfloor(37.9%), veranda (25.0%), underearth(22.9%) in order.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.964-972
• /
• 2010

Objective of this research was to determine the influence of physico.chemical properties of root substrates on growth of daughter plants that were developed through plastic bag cultivation of mother plants in 'Seolhyang' strawberry propagation. Six different formulations of root substrates for daughter plant cultivation were peatmoss + vermiculite (5:5, A), peatmoss + perlite (7:3, B), coir dust + perlite (7:3, C), coir dust + peatmoss + perlite (3.5:3.5:3.0, D), rice-hull + coir dust + perlite (2:7:1, E), and rice hull + coir dust (3:7, F). The 10 cm plastic pots filled with formulated substrates were located near the plastic bag where mother plants were growing. Then the runners and daughter plants originated from mother plants were fixed on each root substrate filled into 10 cm plastic pot and daughter plants were grown in the plastic pots. The container capacity and air space showed big differences among substrates tested. The substrates E and F had the less container capacity and the higher air space than other substrates tested. This indicates that the two substrates would have difficulties in water managements during the raising of daughter plants. The substrates of A, B, and D which contained peatmoss in formulation had higher nitrogen concentrations than those containing coir dust or rice hull. The substrates of E and F which contained rice hull had lower nitrogen, phosphorus and potassium concentrations than those that contained coir. The crown diameters of daughter plants grown in substrate A were around 13 mm which is thicker than those grown in other substrates. The fresh weights of daughter plants grown in A substrate were the heaviest followed by C, F, D, E, and B. The dry weight of daughter plants showed similar tendency to those of fresh weight. The daughter plants which had heavy fresh and dry weights and thick crown diameter are considered good seedlings. Based on this justification, the substrates of A, C and F are acceptable for daughter plant growth of 'Seolhyang' strawberry.

• Journal of Mushroom
• /
• v.5 no.2
• /
• pp.51-58
• /
• 2007

These experiment was conducted to find the superior strain selection, cultivation technique and optimum environmental condition of nameko mushroom culture using plastic container. The results was following as Mycelium of Pholiota nameko grown well at MCM and Hamada media, and its media acidity was pH 6~7. The optimum temperature condition for growing mycelium was $25^{\circ}C$. Under $15^{\circ}C$ and above $30^{\circ}C$ of temperature condition, mycelium growing speed was delayed remarkably. Among the 29 strains of nameko mushroom, the most productive strains was JNM19007, JNM19026, JNM19027 and JNM19028. The optimum media composition rate for produce fruitbody was pine sawdust 80% + wheat bran 20%. In this condition, the average fruitbody amount was 188g per 1,100cc container. The optimum post-culturing period was 50 days and mushroom sprout appeared 7 days after old mycelia removed. The suitable temperature was $12^{\circ}C$ for induce sprout, growing period was $16^{\circ}C$ and the optimum relative humidity was 95% in all culturing periods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.582-585
• /
• 2015

In the aging society, TKRA is steadily increased because of joint diseases. Artificial joint used in TKRA generates metal artifacts in the MRI. Metal artifact may affect diagnosis. In study, We are going to minimize the effect of metal artifact to improve the value of diagnosis by changing the sequence and the type of artificial joint(Co-Cr, Ni-Ti). 1.5T AVANTO, plastic containers and each of the artificial joint (Normal, Co-Cr, NiTi) were used. After the artificial joints fixed in a paper cup was inserted in a plastic container of cylindrical, Signal intensity was measured. To obtain strong and uniform signal intensity, the plastic container was filled with water. We changed Sequences(T1 TSE, T2 TSE, PD TSE) and obtained an Axial image. After excepting the maximum and minimum values, We calculated the average of SNR, CNR and PSNR. Consequently, The SNR, CNR value of PD TSE are measured higher than these of T1 TSE, T2 TSE and The PSNR of Co-Cr is higher than this of Ni-Ti. The SNR of Co-Cr is similar to the SNR of normal comparing this of Ni-Ti. As a result, Using sequence of PD Tse and Co-Cr alloy is considered to be useful.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1169-1177
• /
• 2007

The main objective of this research was to evaluate the effects of process variables which were forming ability, flow displacement, effective stress, effective strain, fluid vector and products defects on manufactured artificial lightweight aggregate made of both incinerated sewage sludge ash and clay by means of the numerical analysis of a rigid-plastic finite element method. CATIA (3D CAD program) was used for an extrusion metal mold design that was widely used in designing aircraft, automobile and metallic molds. A metal forming analysis program (ATES Co.) had a function of a rigid-plastic finite element method was used to analyze the program. The result of extrusion forming analysis indicated clearly that a shape retention of the manufactured artificial light-weight aggregate could be maintained by increasing the extrusion ratio (increasing compressive strength inside of extrusion die) and decreasing the die angle. The stress concentration of metal mold was increased by increasing an extrusion ratio, and it was higher in a junction of punch and materials, friction parts between a bottom of the punch and inside of a container, a place of die angle and a place of die of metal mold. Therefore, a heat treatment as well as a rounding treatment for stress distribution in the higher stress concentration regions were necessary to extend a lifetime of the metallic mold. A deformity of the products could have made from several factors which were a surface crack, a lack of the shape retention and a crack of inside of the products. Specially, the surface crack in the products was the most notably affected by the extrusion ratio.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.67-72
• /
• 2013

This study has been conducted to provide a management plan for recycled products (plastic wastes) by identifying hazardous substances present in it and conducting exposure assessment. The concentration of 7 heavy metals (Cd, Cr, Cu, Fe, Hg, Pb, Zn) was analyzed. Exposure scenario was assumed by the consumption of kimchi made in a recycled plastic bucket. According to the analysis, all of the analyzed samples were within the food code standard level except one sample (137.03 mg/kg, sum of Cd, $Cr^{6+}$, Pb and Hg). In leaching test, all of heavy metals were within the leaching standard (Standards specifications of utensil and container-Packing). In an oral exposure test, Fe, Pb and Zn were detected in cabbages and were below PMTDI (Provisional Maximum Tolerable Daily Intake). As one of the recycled plastic buckets exceeded the standard level, we conclude not to recommend the recycled plastic buckets for cooking purpose.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.197-200
• /
• 2001

A manufacturing process of composite pressure vessel was studied. The vessel was fabricated using the filament winding process. It is utilized as a container of high pressure Helium gas which propels a rocket fuel and an oxidizer. The layup patterns were determined based on the lamination theory. 3-axis controlled filament winding machine was developed to realize the patterns. The vessel was successfully fabricated using the developed machine. And the hydraulic pressure test was performed to measure an applied pressure-strain relations on the composite vessel.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.33-37
• /
• 2007

In recent, the demand of high-productivity injection mold increases because of the growth of international packaging market. The increase of productivity leads to the large-sized injection molding machine and peripheral devices. For solving this problem, the stack mold which is based on the existing machine and device is studied in advanced countries actively. In this study, as the preliminary research of stack mold development, the stack mold which has 2 Level ${\times}4$ Cavity is designed and manufactured. Besides, the motion and structural analysis are executed to verify the stability of developed stack mold.