• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.215-236
• /
• 2014

The flexural behaviour of steel beams significantly affects the structural performance of the steel frame structures. In particular, the flexural overstrength (namely the ratio between the maximum bending moment and the plastic bending strength) that steel beams may experience is the key parameter affecting the seismic design of non-dissipative members in moment resisting frames. The aim of this study is to present a new formulation of flexural overstrength factor for steel beams by means of artificial neural network (NN). To achieve this purpose, a total of 141 experimental data samples from available literature have been collected in order to cover different cross-sectional typologies, namely I-H sections, rectangular and square hollow sections (RHS-SHS). Thus, two different data sets for I-H and RHS-SHS steel beams were formed. Nine critical prediction parameters were selected for the former while eight parameters were considered for the latter. These input variables used for the development of the prediction models are representative of the geometric properties of the sections, the mechanical properties of the material and the shear length of the steel beams. The prediction performance of the proposed NN model was also compared with the results obtained using an existing formulation derived from the gene expression modeling. The analysis of the results indicated that the proposed formulation provided a more reliable and accurate prediction capability of beam overstrength.

• 한국조경학회지
• /
• 제31권4호
• /
• pp.74-81
• /
• 2003

The need for insect and mite resistant turfgrass cultivars arose because of problems associated with pesticide use. Representative cultivars and genotypes of 18 warm-season turfgrass [Zoysia japonica Steud., Z. japonica${\times}$Z. metrella hybrids, Z. japonica${\times}$Z. tenuifotia hybrids, Z. matrella (L.) Merr., Cynodon dactylon (L.) Pers., C. dactylon${\times}$C. transvallensis hybrids, Paspalum notatum Flugge., P. vaginatum Swartz., Stenotaphrum secundatum (Walt.) Kuntze, Eremochloa ophiuroides (Munro.) and Buchloe dactyloides (Nutt.) Engelm.] and 20 cool-season turfgrasses [Poa pratensis L., Festuca arundinacea Schreb., F. rubra L., F. rubra var. commutata Gaud., F. ovina var. duriuscula L. Koch. Agrostis tenuis Sibth., A. palustris Huds., and Latium perenne L.] were evaluated for host resistance to feeding by the Spodoptera depravata (Butler) in the laboratory. Two experiments were set up in the laboratory using 8.5cm diameter${\times}$4.0cm deep plastic petri dishes as larvae feeding chambers. In experiment 1, one neonate larvae were place on the grass in each dish and the dishes were arranged with 5 replicates each within an environmental chamber maintained at $25^{\circ}C$ and 15h light: 9h dark Larval survival and larval weights at 7d and 14d, pupal weights, and days to pupation were compared among turfgrasses. In Experiment 2, 4cm sections of all grasses were oriented equidistant from each other in a pattern resembling the spokes of a wheel. Five one neonate larvae were introduced to the center of each dish. Dishes were immediately placed in an environmental chamber held at $25^{\circ}C$, 15h light: 9h dark Larvae were allowed to feed for 24h. Damage was rated from 0(no damage) to 9(completely consumed) were made for eachturfgrass. Resistance as antibiosis (high mortality, slowed growth, and least preference) was identified in Z. japonica${\times}$Z. tenuifolia hybirids ‘Emerald’, Z. japonica${\times}$Z. metrella hybirds ‘Miyako’ and Eremochloa ophiuroides (Munro.). Cool-season turfgrasses tested were susceptible to feeding by Spodoptera depravata (Butler).

• 한국조경학회지
• /
• 제29권1호
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• 한국지진공학회논문집
• /
• 제19권4호
• /
• pp.195-205
• /
• 2015

Various non-seismic tie details are frequently used for one- and two-story small buildings because the seismic demand on their deformation capacities is not relatively significant. To evaluate the effects of the non-seismic tie details on the seismic performance of reinforced concrete columns, six square columns with a cross section of $400{\times}400mm$ and six rectangular columns with a cross section of $250{\times}640mm$ were tested. The anchorage details at both ends and spacing of tie hoops, along with the cross-sectional shape and the magnitude of axial load, were considered as the primary test parameters. Test results showed that square columns had higher stiffness and lower lateral deformation rather than rectangular columns. Both lap spliced tie and U-shaped tie provided comparable or improved seismic performance to $90^{\circ}$ hook tie in terms of maximum strength, ductility, and energy dissipation. The predicted curves with modeling parameters in ASCE41-13 were conservative for test results of lap spliced tie and U-shaped tie specimens since plastic behavior after flexural yielding could not be considered. For economical design, ASCE41-13 should be revised with various test results of tie details.

• 한국전산구조공학회논문집
• /
• 제35권5호
• /
• pp.287-297
• /
• 2022

본 논문에서는 철계형상기억합금(Fe SMA) 스트립으로 능동구속된 콘크리트 기둥의 실험적, 해석적 연구결과를 제시한다. Fe SMA과 탄소섬유보강시트(CFRP)로 각각 구속된 콘크리트 공시체의 압축실험을 통해 형상기억합금 기반 능동구속기법의 효과성을 평가하였다. 실험결과, Fe SMA 스트립으로 구속된 콘크리트 공시체가 낮은 구속력에도 불구하고 CFRP 시트로 구속된 공시체에 비해 더 우수한 변형능력을 가지는 것으로 밝혀졌다. 실험을 통해 얻은 구속된 콘크리트의 압축거동 결과를 이용해 소성힌지 영역이 각각 Fe SMA 스트립과 CFRP 시트로 보강된 콘크리트 기둥의 유한요소모델을 구축하였다. 기존 수행된 콘크리트 기둥의 수평반복가력 실험결과를 바탕으로 구축된 기둥 모델을 검증하였고, 각각의 기둥 모델에 대한 수평반복가력 해석을 수행하였다. 해석결과, Fe SMA 스트립으로 보강된 콘크리트 기둥이 CFRP 시트로 보강된 기둥모델에 비해 변형, 에너지 소산능력 향상에 효과적임을 확인하였다.

• Structural Monitoring and Maintenance
• /
• 제8권4호
• /
• pp.345-360
• /
• 2021

This paper presents an analytical approach to calculate the buckling load of the cylindrical ring structures subjected to both hydrostatic and hydrodynamic pressures. Based on the conservative law of energy and Timoshenko beam theory, a theoretical formula, which can be used to evaluate the critical pressure of buckling, is first derived for the simplified cylindrical ring structures. It is assumed that the hydrodynamic pressure can be treated as an equivalent hydrostatic pressure as a cosine function along the perimeter while the thickness ratio is limited to 0.2. Note that this paper limits the deformed shape of the cylindrical ring structures to an elliptical shape. The proposed analytical solutions are then compared with the numerical simulations. The critical pressure is evaluated in this study considering two possible failure modes: ultimate failure and buckling failure. The results show that the proposed analytical solutions can correctly predict the critical pressure for both failure modes. However, it is not recommended to be used when the hydrostatic pressure is low or medium (less than 80% of the critical pressure) as the analytical solutions underestimate the critical pressure especially when the ultimate failure mode occurs. This implies that the proposed solutions can still be used properly when the subsea vehicles are located in the deep parts of the ocean where the hydrostatic pressure is high. The finding will further help improve the geometric design of subsea vehicles against both hydrostatic and hydrodynamic pressures to enhance its strength and stability when it moves underwater. It will also help to control the speed of the subsea vehicles especially they move close to the sea bottom to prevent a catastrophic failure.

• 한국지진공학회논문집
• /
• 제27권3호
• /
• pp.129-137
• /
• 2023

This study presents a dry precast concrete (PC) beam-column connection, and its target seismic performance level is set to be emulative to the reinforced concrete (RC) intermediate moment resisting frame system specified in ACI 318 and ASCE 7. The key features include self-sustaining ability during construction with the dry mechanical splicing method, enabling emulative connection performances and better constructability. Test specimens with code-compliant seismic details were fabricated and tested under reversed cyclic loading, which included a PC beam-column connection specimen with dry connections and an RC control specimen. The test results showed that all the specimens failed in a similar failure mode due to plastic deformations in beam members, while the hysteretic response curve of the PC specimen showed comparable and emulative performances compared to the RC specimen. Seismic performance evaluation was quantitatively addressed, and on this basis, it confirmed that the presented system can fully satisfy all the required performance for the intermediate RC moment resisting frame.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.201-209
• /
• 2016

본 연구에서는 천연섬유인 KN섬유를 섬유보강 콘크리트에 사용하기 위한 방안으로, KN섬유의 혼입량 및 유기질 섬유보강재 종류에 따른 콘크리트의 공학적 특성을 실험적으로 확인하였다. 이러한 연구를 위하여 KN섬유의 혼입량 4종류(0, 0.3, 0.6 및 $0.9kg/m^3$) 및 비교용 섬유보강재(JT, CEL, PP 및 NY섬유) 4종류를 대상으로 슬럼프, 공기량, 소성수축 시험 및 압축강도, 인장강도, 휨강도, 그리고 건조 수축량, 탄산화 깊이 등을 실험하였다. 실험결과, KN섬유의 혼입량 $0.6kg/m^3$일 때, 인장강도 및 휨강도 증진에 매우 효과적이며, 소성수축 균열 및 건조수축량 저감, 탄산화 깊이에도 큰 효과가 있는 것으로 나타났다. 또한, 동일한 혼입량($0.6kg/m^3$)을 사용한 유기질 섬유보강재와의 비교실험에서 탄산화 깊이를 제외한 인장강도 및 휨강도, 소성수축 균열 및 건조수축량 저감 등에 KN섬유가 우수한 것으로 나타났다. 따라서, KN섬유의 혼입량 $0.6kg/m^3$를 사용하여 섬유보강 콘크리트에 적용하는 것이 콘크리트의 성능 및 환경성, 경제성 측면에서 가장 적합한 것으로 나타났으며, 향후 현장적용성에 대한 지속적인 연구가 요구된다.

• 한국전산구조공학회논문집
• /
• 제32권1호
• /
• pp.37-44
• /
• 2019

결합 기반 페리다이나믹 모델은 간단한 재료 모델을 통해 취성 재료의 다양한 동적 파괴 특성을 확인할 수 있었지만, 다양한 재료 구성 모델을 표현하는데 많은 한계점이 나타났다. 특히, 절점 간 결합이 서로 독립적으로 작용하여 포아송 비가 고정되고 전단 변형이 표현되는 않는 문제점이 있다. 상태 기반 페리다이나믹 모델은 보다 일반화되고 엄밀한 재료 모델링이 가능하며, 모든 결합의 변형 정보를 통해 각 절점의 거동이 계산되기 때문에 결합 기반 모델에서 표현하지 못한 전단 변형까지도 표현 가능하다. 본 연구에서는 상태 기반 페리다이나믹 모델을 통해 재료 모델을 구성하고, 소성 흐름 법칙으로부터 재료의 완전 소성 거동을 표현할 수 있도록 간단한 재료 모델을 구성한다. 평판 수치 예제를 통해 구성된 완전 소성 재료 모델을 검증하고 응력 변형 곡선을 확인한다. 또한 비국부 접촉 모델링을 통해 서로 다른 두 물체가 충돌하는 현상을 모사하여, 화강암반 모델의 고속 충돌 파괴 해석을 수행하고 결과분석 및 실험현상과 비교한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.45-56
• /
• 2010

Polymer composite materials offer high strength and stiffness to weight ratio, corrosion resistance, and total life cost reductions that appeal to the marine industry. The advantages of composite construction have led to their incorporation in U.S. yacht hull structures over 46 meters (150 feet) in length. In order to construct even larger hull structures, higher quality composites with lower cost production techniques need to be developed. In this study, the effect of composite hull fabrication processes on mechanical properties of glass fiber reinforced plastic (GFRP) composites is presented. Fabrication techniques investigated during this study are hand lay-up (HL), vacuum infusion (VI), and hybrid (HL+VI) processes. Mechanical property testing includes: tensile, compressive, and ignition loss sample analysis. Results demonstrate that the vacuum pressure implemented dining composite fabrication has an effect on mechanical properties. The VI processed GFRP yields improved mechanical properties in tension/compression strengths and tensile modulus. The hybrid GFRP composites, however, failed in a sequential manor, due to dissimilar failure modes in the HL and VI processed sides. Fractography analysis was conducted to validate the mechanical property testing results.