• Structural Engineering and Mechanics
• /
• 제50권2호
• /
• pp.137-149
• /
• 2014

In this study, modal parameters such as natural frequencies, mode shapes and damping ratios of RC frames with low strength are determined for different construction stages using ambient vibration test. For this purpose full scaled, one bay and one story RC frames are produced and tested for plane, brick in-filled and brick in-filled with plaster conditions. Measurement time, frequency span and effective mode number are determined by considering similar studies and literature. To obtain experimental dynamic characteristics, Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification techniques are used together. It is shown that the ambient vibration measurements are enough to identify the most significant modes of RC frames. The results indicate that modal parameters change significantly depending on the construction stages. In addition, Infill walls increase stiffness and change the mode shapes of the RC frame. There is a good agreement between mode shapes obtained from brick in-filled and in-filled with plaster conditions. However, some differences are seen in plane frame, like expected. Dynamic characteristics should be verified using finite element analysis. Finally, inconsistency between experimental and analytical dynamic characteristics should be minimize by finite element model updating using some uncertain parameters such as material properties, boundary condition and section properties to reflect the current behavior of the RC frames.

• 정보과학회 논문지
• /
• 제43권5호
• /
• pp.516-523
• /
• 2016

노역분장을 위해서는 석고로 연기자의 얼굴 모형을 만들고, 그 위에 주름을 조소작업한 후 다시 석고로 음각 몰드를 제작하여 얼굴에 붙일 실리콘 피부 패치를 만들게 된다. 이러한 처리 과정은 며칠이 걸리며 연기자나 분장사에게 어려움을 주고 있다. 최근에 3D 프린팅 및 스캐닝 기술이 발전하여, 얼굴을 스캔하여 실물로 제작하는 것이 쉬워지고 있다. 본 논문에서는 석고나 조소작업 없이 노역분장용 실리콘 마스크를 간편하고 효율적으로 제작하기 위해, 얼굴 스캐닝, 인터랙티브 주름 모델링, 몰드 프린팅으로 이루어진 새로운 파이프라인을 제안한다. 고해상도 얼굴 모델에서도 주름을 실시간에 생성하기 위해 노멀맵 기반의 직관적인 스케치 인터페이스를 제시한다. 그리고 최종적인 주름의 기하를 깊이맵을 이용하여 복원하고, 주름진 얼굴의 음각 몰드를 프린팅한다. 또한 완성된 음각 몰드에 실리콘을 부은 뒤 원래의 양각 얼굴을 겹쳐 실리콘 마스크를 제작함으로써, 제안 파이프라인이 기존 방식보다 노역분장용 마스크를 간편하게 제작할 수 있음을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1770-1773
• /
• 1991

In this paper we present one modeling system, which is composed of a 3-dimensional proile measurement unit, a CAD system and a NC milling machine. This system is compactly combined so that measurement, designing and manufacturing can be performed efficiently. This system was actually applied to make a plaster model of the pottery.

• 대한소아치과학회지
• /
• 제47권2호
• /
• pp.176-187
• /
• 2020

이 연구는 모델 스캐너로 석고 모형을 스캔한 디지털 모형(Model scanned digital model, MSD)과 구내 스캐너로 구강을 스캔한 디지털 모형(Intraoral scanned digital model, ISD)에서 계측한 치아 근원심 폭경(Tooth width, TW)과 치열궁 길이(Arch length, AL)의 신뢰도와 재현성, 치열궁 길이 편차(Arch length discrepancy, ALD) 분석의 타당도를 평가하였다. 만 12 - 18세의 남, 여 30명에게 석고 모형, MSD, ISD를 획득하고, 2번 계측한 TW, AL의 신뢰도는 Pearson 상관 분석, 4명의 재현성은 군간 상관 분석 그리고 TW, AL 및 ALD의 타당도는 대응표본 t검정으로 평가하였다. 결과적으로 모든 군에서 계측한 TW, AL는 높은 신뢰도와 재현성을 보였고 MSD군의 ALD분석은 적절한 타당도를 보였다. ISD 군의 TW는 가장 높은 타당도를 보인 반면에, AL와 ALD분석은 유의미하게 짧게 측정되어 낮은 타당도를 보였으므로 임상가는 디지털 모델을 이용하여 공간 분석 시행 시 이를 고려해야 할 것이다.

• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.79-84
• /
• 2007

본 연구는 축소모형실험을 위한 적정한 재료를 찾기 위해 이루어졌다. 각 재료의 일축압축강도는 이전의 연구를 통해 얻어졌으며, 축소율을 이용하여 계산된 강도와 비교하였다. 두 결과는 유사한 경향을 나타냈으며, 시멘트 모르타르가 석고보다 더 적합한 것으로 나타났다.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.303-308
• /
• 2008

Purpose: The purpose of this study is to develop three-dimensional computerized anthropometry(3DCA) and to compare its reliability and accuracy 3DCA with manual anthropometry(MA) for measurement of lips and nasal deformities in unilateral cleft lips and palate(UCLP) patients. Methods: Samples were consisted of six UCLP patients whose facial plaster models were available immediately before and 3 months after the cleft lip surgery. MA of the facial plaster models was carried out using an electronic caliper. In 3DCA, three-dimensional auto-measuring program was used to digitize landmarks and to measure three-dimensional virtual facial models (3DVFM), which was generated with a laser scanner and 3D virtual modeling program. Intraclass correlation coefficients(ICC) were calculated to evaluate reliability and reproducibility of the variables in both methods, and Wilcoxon's signed rank test was done to investigate the difference in values of the same variables of facial models of each patient between two methods. Results: All ICC values were higher than 0.8, so both methods could be considered reliable. Although most variables showed statistical differences between two methods(p<0.05), differences between mean values were very small and could be considered not significant in clinical situation. Conclusion: In clinical situation, 3DCA can be an objective, reliable and accurate tool for evaluation of lips and nasal deformities in the cleft patients.

• 대한기관식도과학회지
• /
• 제18권1호
• /
• pp.13-18
• /
• 2012

Objective This study was conducted to gather basic information of 3D CT in detecting and gaining information of esophageal foreign body (FB) models. Materials and Methods The chest model was made using PVC bottle, rubber balloon and plaster. Fish bone, Persimmon stone were used to mimic foreign bodies of esophageal model. The foreign body models were inserted into the balloon removing air from it and the balloon was sealed. The esophageal FB model was inserted into the chest model. The remaining space in the chest model was filled with fish paste and water to simulate soft tissue around esophagus. CT of chest model was reconstructed three-dimensionally by Rapidia software to make images of foreign body models. The axial CT, MPR image and VOI image were compared with real foreign body materials as to shape, size, location and orientation. Results Esophageal FB models were easily made. CT data gave good 3D images and showed realistic foreign body materials. Conclusion The results indicate the usefulness of 3D CT technique to help in diagnosis of esophageal foreign body models.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.236-244
• /
• 2018

PURPOSE. To determine the discrepancy in monolithic zirconium dioxide crowns made with computer-aided design and computer-aided manufacturing (CAD/CAM) systems by comparing scans of silicone impressions and of master casts. MATERIALS AND METHODS. From a Cr-Co master die of a first upper left molar, 30 silicone impressions were taken. The 30 silicone impressions were scanned with the laboratory scanner, thus obtaining 30 milled monolithic yttrium stabilized zirconium dioxide (YSZD) crowns (the silicone group). They were poured and the working models were scanned, obtaining 30 milled monolithic yttrium stabilized zirconium dioxide (YSZD) crowns (the plaster group). Three predetermined points were analyzed in each side of the crown (Mesial, Distal, Vestibular and Palatal), and the marginal fit was evaluated with SEM (${\times}600$). The response variable is the discrepancy from the master model. A repeated measures ANOVA with two within subject factors was performed to study significance of main factors and interaction. RESULTS. Mean marginal discrepancy was $22.42{\pm}35.65{\mu}m$ in the silicone group and $8.94{\pm}14.69{\mu}m$ in the plaster group. The statistical analysis showed significant differences between the two groups and also among the four aspects. Interaction was also significant (P=.02). CONCLUSION. The mean marginal fit values of the two groups were within the clinically acceptable values. Significant differences were found between the groups according to the aspects studied. Various factors influenced the accuracy of digitizing, such as the design, the geometry, and the preparation guidance, as well as the texture, roughness and the color of the scanned material.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• 한국농촌건축학회논문집
• /
• 제23권4호
• /
• pp.63-71
• /
• 2021

The purpose of this study was to investigate whether the standard models for rural housing and wooden housing model have performance for hygrothermal and to propose a way of improvement relevant to hygrothermal performance for those models. All of the models to be analyzed were found to have some parts that were absent of stability in terms of performance for hygrothermal. In the process of analyzing the causes and proposing improvement measures, the following conclusions were derived. Fist, The exterior surface of the structure should be composed of a structure with good moisture permeability, and for the interior surface, a variable vapor retarder paper should be applied in consideration of the reverse condensation phenomenon in summer. Second, in terms of performance for hygrothermal, applications of external insulation plaster finish to the exterior wall or of ventilation method using a rafter vent on the roof should be avoided. Third, a rain screen method with a ventilation layer should be applied to the exterior wall, and a method of constructing ventilation layer separated from the insulation layer with a vapor retarder paper should be applied to the roof. Fourth, the application of insulation materials having capillary action, such as wood fiber insulation board or cellulose insulation board, contributes to more stable performance for hygrothermal.