• 제목/요약/키워드: plasma assisted combustion

검색결과 5건 처리시간 0.019초

매연여과장치 재생을 위한 플라즈마 응용 버너 개발 (Development of Plasma Assisted Burner for Regeneration of Diesel Particulate Filter)

  • 차민석;이대훈;김관태;이재옥;송영훈;김석준
    • 한국연소학회지
    • /
    • 제12권4호
    • /
    • pp.8-13
    • /
    • 2007
  • Plasma assisted combustion is an old subject for the combustion society, but recently, the subject is refocused partly because techniques for non-thermal plasmas are progressed significantly, and partly because there are lots of applications which need to be overcome by a new reaction technology. In the present study, we have developed plasma assisted burner (plasma burner), which can be used as a heating source in a diesel particulate filter system. The burner can burn 20-60 cc/min of diesel fuel with 50 lpm of fresh air in an exhaust pipe of 2.0 liter diesel engine. Using 20 cc/min of diesel fuel, an exhaust temperature for 2.0 liter diesel engine can be raised up to around $600^{\circ}C$ for a wide range of engine speed (idle-3,000 rpm). The characteristics of the plasma burner are reported, and the possible operating mechanism of it will be discussed based on the effects of an electric field and a plasma on flames.

  • PDF

플라즈마를 이용한 매연여과장치 재생용 버너 개발 (Development of Plasma Assisted Burner for Regeneration of Diesel Particulate Filter)

  • 차민석;이대훈;김관태;이재옥;송영훈;김석준
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.202-206
    • /
    • 2007
  • Plasma assisted combustion is an old subject for the combustion society, but recently, the subject is refocused partly because techniques for non-thermal plasmas are progressed significantly, and partly because there are lots of applications which need to be overcome by a new reaction technology. In the present study, we have developed plasma assisted burner (plasma burner), which can be used as a heating source in a diesel particulate filter system. The burner can bum 20 - 60 cc/min of diesel fuel with 50 lpm of fresh air in an exhaust pipe of 2.0 liter diesel engine. Using 20 cc/min of diesel fuel, an exhaust temperature for 2.0 liter disel engine can be raised up to around $600^{\circ}C$ for the range of engine speeds is idle - 3,000 rpm. The characteristics of the plasma burner are reported, and the possible operating mechanism of it will be discussed based on the effects of an electric field and a plasma on flames.

  • PDF

OpenFOAM을 이용한 비평형 플라즈마 연소 수치해석 (Numerical analysis of nonequilibrium plasma assisted combustion using OpenFOAM)

  • 박영도;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.181-182
    • /
    • 2015
  • The nonequilibrium plasmas in which electrons have much higher energy compared to heavy species that cannot be represented with single temperature can enhance combustion reaction significantly. Therefore the nonequilibrium plasmas provide new effective mechanism to control combustion to overcome difficulties advanced combustion devices exploiting extreme operating parameters for high efficiency, lower emission.

  • PDF

플라즈마 산화와 암모니아 SCR 복합탈질공정의 엔진적용 연구 (A Study on a Combined DeNOx Process of Plasma Oxidation and $NH_3$ SCR for Diesel Engine)

  • 송영훈;이재옥;차민석;김석준;류정인
    • 한국연소학회지
    • /
    • 제12권4호
    • /
    • pp.39-46
    • /
    • 2007
  • The technique of $NH_3$ SCR (selective catalytic reduction) assisted by plasma oxidation has been applied to a 2,000 cc diesel engine. The present combined $deNO_x$ process consists of two steps. The first step is that about 50% of emitted NO from the engine is oxidized to $NO_2$ in a plasma oxidation process. The second step is that NO and $NO_2$ are simultaneously reduced to $N_2$ in the $NH_3$ SCR process. The engine test results showed that the $deNO_x$ rates of the present combined process are higher than those of conventional SCR process by 20%. Such a high performance of the combined process is noticeable especially, when the exhaust temperature are relatively low, i.e., $170-220^{\circ}C$. To provide a feasibility of the present technique the effects of operating conditions, such as an electrical input energy, an exhaust gas temperature, an initial NO concentration, and the amount of hydrocarbon addition, were discussed.

  • PDF

디젤의 청정연소를 위한 저온 플라즈마 연료개질 및 개질가스의 디젤엔진 첨가에 관한 연구 (Nonthermal Plasma-assisted Diesel Reforming and Injection of the Reformed Gas into a Diesel Engine for Clean Combustion)

  • 김성수;정수현;김진걸
    • 대한환경공학회지
    • /
    • 제27권4호
    • /
    • pp.394-401
    • /
    • 2005
  • 저온 플라즈마 연료개질 장치를 개발하여 여러 운전인자가 그 성능에 미치는 영향을 조사하였고 생성된 수소농후 개질가스를 무부하(Idle) 상태의 디젤엔진에 연소용 공기와 같이 주입하여 NO와 매연 저감효율에 미치는 영향을 조사하였다 전력 소모량이 증가할수록 개질반응의 점화가 더욱 용이하였으나 $H_2$ 농도, $H_2$ 수율, 에너지 전환율과 같은 저온 플라즈마 연료개질 장치의 성능은 O/C 비에 의해서만 영향을 받았는데 그 이유는 평형 반응온도가 O/C 비에 의하여 결정되기 때문이다. 저온 플라즈마 연료개질 장치에서의 $H_2$ 수율과 에너지 전환율은 O/C 비가 증가함에 따라 O/C 비가 $1.2{\sim}1.5$에서 33.4%와 66%의 최고값을 통과하였다. $H_2$ 수율과 에너지 전환율이 O/C 비가 $1.2{\sim}1.5$ 이하인 범위에서 O/C 비가 증가함에 따라 증가하는 이유는 O/C 비가 높아짐에 따라 완전 산화반응이 충분히 일어나서 반응온도가 높아지기 때문으로 보인다. O/C비가 $1.2{\sim}1.5$ 이상인 범위에서 O/C 비가 증가함에 따라 $H_2$ 수율과 에너지 전환율이 감소하는 현상은 과잉산소 조건에서 완전산화반응이 더욱 촉진되어 $H_2$ 수율과 에너지 전환율이 감소하였기 때문으로 보인다. 무부하 상태의 디젤엔진에 개질가스를 주입시 개질된 디젤/총디젤 무게비가 $18.2{\sim}23.5%$까지 증가할 때 NO저감효율과 매연제거효율은 각각 68.8%와 55.5%까지 증가하였다.