• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.478-486
• /
• 2022

Holography is a human-friendly technology that can express 3D stereoscopic information without eye fatigue. You can experience the mysterious features of light directly and indirectly, and you can also experience the principles of 3D imaging, which makes it a very good curriculum. As such, although holography is very effective in teaching students optics and 3D imaging technology, it has not yet been systematically established. The reason is the cost burden such as expensive equipment and laboratories, and the lack of easily accessible educational equipment. We implemented a portable holographic recording system to solve this problem. In addition, since silver halides, which use harmful chemicals, are not used in the process of developing the recording medium, and photopolymers are used, it is possible to educate not only the general public but also young students. In order to improve the completeness of the recorded result, the mechanism part, light source, and recording medium part of the production system were newly constructed to complement all the existing problems. The proposed system will make holography easily accessible to many people in a variety of fields, not just education. Through the interesting experience of various features and principles of light and the production of holograms with high satisfaction, we hope to popularize them in various fields such as education.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.263-267
• /
• 2009

In order to improve the hydrophilic property on the surface of d-PMMA(deuterated poly-(methyl methacrylate)) film, it was exposed to oxygen plasma, All experimental conditions were same except to plasma exposure time that was varied from 0 to 180 s, The effects according to the exposure time were identified using contact angles, X-ray reflectometer(XRR), neutron reflectometer(NR), and X-ray photoelectron spectroscopy(XPS). By confirming that as the exposure time increases, water contact angle decreases while the composition of oxygen increases, it was confirmed that the composition of oxygen has a huge influence on improving the hydrophilic property. The physical characters as a function of the exposure time were investigated by the XRR. By analyzing complementally the results of the XRR, NR, and XPS, more detailed chemical bonding conditions were studied by obtaining not only composition of the carbon and oxygen but that of the hydrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1290-1298
• /
• 2001

A total of 371 weaned pigs were used in three experiments to evaluate the effects of spray dried plasma (SDP), soybean protein sources, and lactose on growth performance. In Exp. 1, 128 pigs (5.99 kg, $18{\pm}2d$) were used to evaluate the effect of SDP (0 vs 7%), lactose (0 vs 30%), and two soybean protein sources [soybean meal (SBM) and extruded soybean protein concentrate (ESPC)] in phase I (d 0 to 14) diets on pig performance in a $2{\times}2{\times}2$ factorial arrangement. Spray-dried plasma increased phase I ADG (p<0.01) and ADFI (p<0.05) in the SBM diets, but not in the ESPC diets. Lactose improved ADG and gain/feed ratio (G/F) in phase I (p<0.01). In Exp. 2, 144 pigs (5.50 kg, $17{\pm}3d$) were used to evaluate the effect of SDP (0 vs. 3.5%) and three soybean protein sources [SBM, ESPC, and soybean protein concentrate (SPC)] in phase I diets, and the effects of two different phase II (d 14 to 28) diets (simple vs complex) in a $2{\times}3{\times}2$ factorial arrangement of treatments. In phase I, SDP increased ADG (p<0.01) and improved G/F (p<0.05). Pigs fed SBM had the highest ADG and ADFI, with a G/F similar to the pigs fed ESPC. In phase II, pigs fed the complex diet had improved ADG (p<0.01), ADFI (p<0.05), and G/F (p<0.05) compared to the simple diet. In Exp. 3, 99 weaned pigs (5.77 kg, $17{\pm}3$d) were used to evaluate the effect of SBM, ESPC, and ESPC with SDP in the phase I diets. Pigs fed SBM with no blood product in the diet had the lowest ADG (p<0.01), ADFI (p<0.01), and G/F (p<0.05) in the first week of phase I. There were no differences in soybean protein sources fed in phase I diets on overall pig performance. These experiments are indicated that SDP and lactose improve the phase I performance. Soybean meal can be used as the major protein source in phase I diets with SDP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.200.2-200.2
• /
• 2016

Carbon-based materials have been known as ablative material and have been used for thermal protection systems. Ablation is an erosive phenomenon that results in thermochemical and thermomechanical changes on materials. Ablation resistance is one of the key properties that determines performance and life-time of the thermal protection material under ablative conditions. In this study, ablation properties of graphite, 3-dimensional (C/C) composites (needle-punched type and rod type) were investigated byusing a plasma wind tunnel which produce a supersonic plasma flow from a segmented arc heater with the power level of 0.4 MW. The mass losses and surface roughness changes which contain main result of the ablation are measured. A morphological analysis ofthe carbon-based materials, before and after the ablation test, are performed through field emission scanning electron microscopy (FE-SEM) and non-contact 3D surface measuring system. Electronic balance and a portable surface roughness tester were used for evaluation of the recession and mass loss of the test samples.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.591-598
• /
• 2011

This paper investigates a power supply of medium voltage with enhanced ignition characteristics for plasma torches. A series resonant half-bridge topology is presented as a suitable ignition circuitry. The ignition circuitry is integrated into the main power conversion system of a multi-phase staggered three-level dc-dc converter with a diode front-end rectifier. A plasma torch rated at 3MW, 2kA and having a physical size of 1m is selected to be the high enthalpy source for a waste disposal system. The steady-state and transient operations of a plasma torch are simulated. The parameters of a Cassie-Mary arc model are calculated based on 3D magneto-hydrodynamic simulations. The circuit simulation waveform shows that the ripple of the arc current can be maintained within ${\pm}10%$ of its rated value under the presence of a load disturbance. This power conversion configuration provides a high enough ignition voltage, around 5KA, during the ignition phase and high arc stability under the existence of arc disturbance noise resulting in a high-performance plasma torch system.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.60-65
• /
• 2013

Ar, $N_2$, and He are the conventional kind of shield gas that are used for laser welding. Many researches on the impact of laser welding shield gas have been done, and it is on going until now. However, there are few studies that analyze the changes and differences of the plasma emission signal. Therefore, in this study, we evaluated the change in the penetration characteristics according to the type of shield gas during fiber laser welding impacts to the plasma signal. As a result, if was checked that the difference in molecular weight of Ar, $N_2$, and He affects to the amount of spatter, and also found that the measured plasma radiation signal changes similar to the order of the molecular weight of the gases. Especially, clear change on the signal intensity per each shield gas was measured through RMS, and found that the shield gas was nothing to do with the FFT analyzed result.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.60-60
• /
• 2013

공정용 플라즈마는 반도체 웨이퍼 가공, 평판형 디스플레이, 자동차 및 산업용 부품 코팅, 장식용 코팅에 널리 사용되고 있다. 이를 위한 장비 개발은 플라즈마에 대한 깊은 이해가 없이는 불가능하여 주로 선진 장비 회사의 모델을 참고하여 유사하게 만드는 수준에서 진행되어 왔는데 2D, 3D modeling이 가능한 전산 유체 모델은 일부 상용화 패키지 S/W까지 등장하였으나 플라즈마와 수치 해석에 대한 기본적인 지식이 없이는 사용이 매우 어렵다는 단점이 있어 국내의 일부소자회사의 장비 관련 연구팀 정도에서만 사용이 가능했다. 이를 중견 장비 업체들에 까지 확대하기 위한 작업의 일환으로 2D-ICP, 2D-CCP model의 기본적인 기능을 갖추고 기하적 크기는 파라미터 방식으로 사용자가 조절할 수 있도록 만든 framework을 개발하려는 시도에 대해서 논의 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1806-1808
• /
• 1998

Tests of pilot-scale plasma DeSOx-DeNOx system using pulsed streamer corona were carried out. The system consists of the reactor with wire-plate electrodes the $30kW_{max}$. MPC type pulse generator, and $1MW_{th}$ pulverized coal combustor as a flue gas source. $NH_3$ and $C_2H_4$ were used to enhance the removal rate. The experimental result on the removal efficiency of SOx/NOx and on the effect of the additives was presented in this paper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1393-1398
• /
• 2011

Four 4-month old Charolais${\times}$Dorset male sheep (initial liveweight $25.0{\pm}1.1\;kg$), fitted with rumen and abomasal fistulas and nourished by total intragastric infusions, were used to study the relationships between methionine (Met) supply, nitrogen (N) retention and plasma insulin-like growth factor-I (IGF-I). Four graded levels of Met, i.e. 0 g/16 g N, 1.76 g/16 g N, 3.52 g/16 g N and 7.04 g/16 g N, were infused into abomasums as experimental treatments. The sheep and treatments were allocated in a $4{\times}3$ incomplete Latin square design (Yudon square design). The experiment lasted 3 periods and each period was 10 days. Quadratic correlations were found between Met level (x, g/16 g N) and N retention (y, g/d): y = $-0.03x^2$+0.41x+2.62, $r^2$ = 0.66, n = 12, p = 0.008, and between methionine level (x, g/16 g N) and plasma IGF-I concentration (y, ng/ml): y = $0.80x^2$-4.53x+190.24, $r^2$ = 0.51, n = 12, p = 0.009. No significant correlation was found between plasma IGF-I (x, ng/ml) and N retention (y, g/d) (p>0.05). It was concluded that Met level had a significant influence on N retention and plasma IGF-I concentration whereas IGF-I might not be an important mediator in the regulation of N metabolism by Met in growing sheep nourished by total intragastric infusions.

• YAKHAK HOEJI
• /
• v.54 no.4
• /
• pp.295-299
• /
• 2010

The aim of this study was to develop and validate for determination of alibendol in human plasma by HPLC method. After precipitation of 500 ${\mu}l$ plasma samples by 50% methanol 50 ${\mu}l$ and 60% perchloric acid 30 ${\mu}l$ and the supernatant 50 ${\mu}l$ was injected into HPLC. The assay was performed isocratically using 10 mM potassium phosphate (pH 3.0) and acetonitrile (80 : 20, v/v) as mobile phase. The $C_{18}$ column (particle size $3.5{\mu}m$, $4.6{\times}50$ mm, Zorbax Eclipse) was used as a solid phase. The mobile phase was delivered at a flow-rate of 1.7 ml/min, detection was by ultraviolet absorption at 232 nm and concentrations were calculated on the basis of peak areas. In these conditions, alibendol can be separated from ethylparaben, the internal standard, and endogenous substances. The retention times of alibendol and ethylparaben were just about 2.6 and 3.5 minutes, respectively. This rapid HPLC method was validated by examining the precision and accuracy for inter- and intra-day analysis. The standard curve was linear ($R^2$=1.0000) over the concentration range of 0.05~20 ${\mu}g$/ml. The inter-day relative standard deviation (R.S.D.) and accuracy were 0.2~12.2% and 94.4~101.2% (82.7% at the lower limit of quatitation). The intra-day R.S.D. and accuracy were 0.1~11.8% and 98.8~102.5%, respectively. The method was successfully applied to the determination of alibendol in plasma for a pharmacokinetic study.