• 한국산림과학회지
• /
• 제35권1호
• /
• pp.9-14
• /
• 1977

은수원사시나무(${\times}$P. albaglandulosa)조림지(造林地)에서 임분밀도(林分密度)가 693본(本)/ha의 6년생(年生), 625본(本) 또는 527본(本)/ha의 9년생(年生) 임분(林分)에 대하여 상대생장법(相對生長法)으로 현존량(現存量)과 생산성(生産性)을 추정(推定)하고 생산구조(生産構造)를 분석(分析)하였다. 1. 생산구조도(生産構造圖)의 광합성부(光合成部)는 층(層)을 형성(形成)하여 광선(光線)의 투입(透入)에 효과적(効果的)인 특징(特徵)을 나타내었다. 2. 지상부(地上部) 현존량(現存量)은 6년생(年生)이 18.11 ton/ha, 9년생(年生)이 38.8~47.3ton/ha 이며, 간재적(幹材積)은 6년생(年生)이 $31.3m^3/ha$, 9년생(年生)이 $68.8{\sim}83.9m^3/ha$이었다. 3. 년순생산량(年純生産量)은 6년생(年生)에서 4.8 ton/ha/yr, 9년생(年生)에서 10.0~11.7ton/ha/yr를 얻었고. 간재적(幹材積)의 순생산량(純生産量)은 $17.9{\sim}21.1m^3/ha/yr$로 나타났다. 4. 9년생(年生)의 표준지(標準地)에서 현존량(現存量) 및 순생산량(純生産量)에 차이(差異)가 생기는 이유(理由)는 토양(土壤)의 화학성분(化學成分)에 의하지 않고 물리적(物理的) 성질(性質)에 기인(起因)하는 것으로 사료(思料)되었다.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.120-125
• /
• 2005

Continuous degradation of forest in both quality and quantity threatens wood security in the future. Thus in the future, most wood and pulp will be expected to be produced from plantation forests. We attempt to produce superior trees suitable for such plantations with maximum productivity in limited land area. Tree productivity could be enhanced either by promoting growth and wood quality or by reducing loss caused by abiotic and biotic stresses. Genetic transformation techniques may offer ways to improve the productivity by enabling trees to tolerate the stresses or to covert limited resources into big biomass. With the availability of information on various functional genes and gene transfer techniques, it should be possible to develop such trees. In this presentation, our work to produce such trees at Korea Forest Research Institute is briefly introduced.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.13-21
• /
• 2009

Pulp and paper industry is a typical plant industry which usually consume lots of water and energy. Recently, environmental issues have become more important due to climate changes around the world, and reinforcement in the regulatory content in transfer and management of chemical material and that in environmental regulations for waste water and air. Paper industry is a source material recycle industry which recycle or reuse waste paper, recyclable wood, planned plantation or lumber from thinning and waste wood. Hence it can be said that paper industry is the representative industry for earth environment and of 21th century.

• Journal of the Korean Wood Science and Technology
• /
• 제40권3호
• /
• pp.156-163
• /
• 2012

본 연구에서는 국내산 리그노셀룰로오스 자원을 이용하여 기계적 처리를 통해 나노섬유를 제조 후, 형태학적 특성 및 고강도 시트로의 응용 가능성을 평가하였다. 그 결과, 연속식 분쇄 처리는 세포벽의 구조를 느슨하게하고 분쇄 소요 시간이 증가함에 따라 나노스케일에 가까운 섬유가 관찰되었다. 재료의 미립화 정도를 증명하는 여수시간은 모든 공시재료에서 분쇄 소요시간이 증가함에 따라 직선적인 증가 경향을 나타내었다. 셀룰로오스의 상대결정화는 기계적인 해섬처리 정도에 따른 차이를 보이지 않았으나 탈리그닌 처리에 의해 크게 증가하였다. 셀룰로오스 나노섬유 시트는 기계적인 분쇄 소요시간이 증가함에 따라 인장강도가 증가하였고 옥수수줄기를 이용한 시트에서 특히 높은 인장강도가 측정되었다. 상기와 같은 결과는 국내 자생 식물자원을 활용한 셀룰로오스 나노섬유 제조 기술의 유용한 기초자료로 활용될 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.308-316
• /
• 2017

본 연구는 우산고로쇠나무 조림지에서 수액 출수 특성을 구명하고자 수행하였다. 그 결과, 우산고로쇠나무 수액 출수량은 일 평균기온 $3.4^{\circ}C$ 이상 오를 시 출수량이 급격히 감소하였으며, 이를 고려해볼 때, 2월 하순 이전에 수액채취를 하는 것이 효율적일 것으로 판단되었다. 하루 중 수액출수는 약 9시경부터 출수를 시작하여 11시경에 최대량이 출수되었고 16시경에 출수가 종료되었다. 수액 당도는 시간이 흐름에 따라 감소하는 경향이 나타났으며, Na를 제외한 다른 무기성분들은 시기별 차이는 없었다.

• Journal of Ginseng Research
• /
• 제37권4호
• /
• pp.491-495
• /
• 2013

Wood-cultivated ginseng, including roots in its dried form, is produced in forest land without using artificial facilities such as light barriers. To identify suitable sites for the propagation of wood-cultivated ginseng, factor combination technique (FCT) and linear combination technique (LCT) were used with geographic information system and the results were superimposed onto an actual wood-cultivated ginseng plantation. The LCT more extensively searched for suitable sites of cultivation than that by the FCT; further, the LCT probed wide areas considering the predominance of precipitous mountains in Korea. In addition, the LCT showed the much higher degree of overlap with the actual cultivation sites; therefore, the LCT more comprehensively reflects the cultivator's intention for site selection. On the other hand, the inclusion of additional factors for the selection of suitable cultivation sites and experts' opinions may enhance the effectiveness and accuracy of the LCT for site application.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 추계학술대회
• /
• pp.24-24
• /
• 2018

Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.467-476
• /
• 2014

인도네시아산 주요 조림수종(Albizia, Gmelina, Mangium)과 유망수종(Durian, Gandaria, Jengkol, Kupa, Mangga, Nangka, Rambutan)의 밀도, 수축률, 종압축강도와 경도 등 물리적 및 역학적 특성을 조사하였다. 그 결과, Mangium, Gandaria와 Rambutan은 높은 밀도를, Albizia, Durian과 Jengkol은 낮은 밀도를 보였다. 공시재료 중 Mangium, Gandaria와 Mangga의 수축률은 다른 수종에 비해 작았으며, Albizia, Jengkol과 Rambutan의 수축률은 다른 수종에 비해 높았다. 이방도(T/R)는 Albizia, Kupa와 Mangga가 낮았고, Gmelina, Durian과 Jengkol이 다른 수종에 비해 높았다. Mangium과 Nangka는 종압축강도와 경도가 높았으며, Durian, Jengkol과 Mangga는 낮은 종압축강도를, Albizia와 Gmelina는 낮은 경도를 보였다. 10수종 중 Albizia, Durian, Jenkol, Mangga의 4수종을 제외한 6수종의 물리적 및 역학적 성질은 비교적 우수한 것으로 판단되었다. 본 실험의 결과는 인도네시아산 조림목의 효율적인 이용 및 장래 조림을 위한 유용한 기초자료로 활용될 수 있을 것이라 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.109-132
• /
• 2023

The objective of this study was to reveal the impact of thinning and pruning regimes on the physical and mechanical properties of clonal teak wood planted in Java. In this study, a 15-year-old clonal teak plantation was carried out and the obtained data were evaluated with analysis of variance (ANOVA). The results showed that different thinning intensities had a significant impact on the alteration of heartwood volume development (F = 25.63; p < 0.0001). Meanwhile, the impact of different thinning treatments in several physical properties depends on the pruning treatment levels [moisture content (F= 12.18, p < 0.0001); tangential shrinkage (F = 15.60, p < 0.0001); T/R ratio (F = 7.17, p < 0.0001); and volumetric shrinkage (F = 10.81, p < 0.0001)]. However, different thinning intensities had no significant impact on wood basic density alteration (F = 0.72, p = 0.486), while pruning intensities affect the differences between radial (F = 3.52, p = 0.030) and volumetric shrinkage (F = 3.13, p = 0.044). In mechanical properties, thinning intensity levels did not promote any significant differences [modulus of elasticity (F = 1.41, p = 0.248); modulus of rupture (F = 0.94, p = 0.392); compressive strength parallel to grain (F = 0.21, p = 0.813); and compressive strength perpendicular to the grain (F = 0.41, p = 0.669)]. Meanwhile, different pruning treatments and combination treatments were not significantly altered all mechanical properties. These results indicated that the thinning and pruning regimes can enhance the mechanical properties without having a serious alteration in the physical properties of clonal teak wood.