• Herbal Formula Science
• /
• v.11 no.2
• /
• pp.213-232
• /
• 2003

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

• The Journal of Korean Medicine
• /
• v.17 no.2 s.32
• /
• pp.5-16
• /
• 1996

For distinguish between Lophatherum gracile and Phyllostachys nigra var. henonis based on natural shape and external-internal morphology of medicinal shape, general contents of oriental medicine were rearranged through bibliography. As a result, two medicinal stuffs indicated the difference in shape and structure(external-internal and powder)of origin plant bibiliographically. After this, this contents were utilized to give proof of many effective difference between two medicinal stuff.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.55-65
• /
• 1994

Given the flow matrix, plant size and department sizes, the algorithms in this paper provide the layout with rectilinear distance. To construct automated facility design, cut tree approach is employed. A branch and bound computer code developed by Tillinghast is modifided to find the feasible fits of departments without shape distortion in the plant rectangle.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.65-69
• /
• 1970

Several days after culture, the parts around suspensor turned brown. In about 10 days the embryo started to form protocorm sending out hairs through seed coat. Around 20 days after culture, most of the protocorms emerged out of seed coat and some of them began to take green color. When observed two months after culture, the protocorn took the characteristic top-shape feature.

• Korean Journal of Plant Taxonomy
• /
• v.51 no.2
• /
• pp.115-132
• /
• 2021

Seven species and two varieties belonging to the genus Boehmeria Jacq. (Urticaceae) are known to be distributed in Korea. Among them, B. spicata, B. tricuspis, and B. tricuspis var. unicuspis were subjected to an external morphological study. Among the individuals believed to exhibit variations in the leaf shape, B. gracilis and B. silvestrii were newly recognized. Unlike related taxa, B. gracilis has middle leaves with an elliptic, broadly elliptic, ovate, or broadly depressed ovate shape, a regular and serrulate-dentate margin, and an unlobed and short caudate or cuspidate apex. Boehmeria silvestrii has middle leaves with 5-angled ovate, orbicular ovate or broadly ovate shapes, and 3- or 5-lobed and caudate apices. Therefore, we assigned the corresponding names 'Top-geo-buk-kko-ri' and 'Cham-geo-buk-kko-ri'. Meanwhile, the B. spicata complex (B. gracilis, B. silvestrii, B. spicata, and B. tricuspis var. unicuspis) is very closely related in terms of the morphological characters, whereas B. tricuspis exhibits no relationship. Furthermore, because the scientific name and type specimen of B. tricuspis var. unicuspis (Pul-geo-buk-kko-ri) are problematic, the correct name B. paraspicata Nakai and corresponding holotype are presented. Additionally, lectotypes of B. gracilis and B. silvestrii are newly designated here. A taxonomic treatment, descriptions, a key, photographs, type specimens, and leaf variation images of the B. spicata complex are provided in this study.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.3
• /
• pp.136-149
• /
• 2016

Green water impact occurs frequently on offshore platform due to waves with a height greater relative to the freeboard of the structure. This phenomenon exerts a large impact load on the deck. In this paper, offshore platform models with green water protectors of various shapes were fixed to the center of a 3D wave tank to measure the impact pressure acting on the various points on deck and protectors. The impact pressure distribution differed depending on the protector shape, and various patterns of wave creeping up the protector were observed. The protector shape that exerted the lowest pressure impact on the deck will be useful in the deck design of offshore platform, and the model test results will be expected to be used for designers to select the best protector form.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.2
• /
• pp.103-107
• /
• 2011

The seed characteristics of Withania somnifera were studied using light and scanning electron microscopy in order to determine the specific features of this species. The seed color is yellow, and the seed shape is reniform measuring between two to three millimeters. The seed of W. somnifera is exarillate and albuminous. The seed coat type is exotestal. The seed coat develops from a single integument. The young seed coat consists of single-layered exotesta, multi-layered mesotesta and single-layered endotesta. However, parenchymatous mesotesta layers are completely compressed at maturity. Therefore, the seed coat was represented by sclerenchymatous exotesta. The primary sculpture on the seed surface is reticulate, and cells are irregular in shape with undulating anticlinal walls. In addition, the seed surface has several characteristic holes between the anticlinal walls.

• Korean Journal of Plant Taxonomy
• /
• v.48 no.3
• /
• pp.172-184
• /
• 2018

We examined the floral morphology of 15 taxa of five genera (Cynanchum, Marsdenia, Metaplexis, Tylophora, and Vincetoxicum) in Korean Asclepiadoideae using a stereoscopic and scanning electronic microscope to clarify and describe the floral characteristics. In this study, the corolla and corona types, the types of corona lobes, appendages on the corona lobes, and the apex shape of the style head are considered as diagnostic characteristics at the generic level. The genus Vincetoxicum, which is treated as a synonym of the genus Cynanchum in Korea, is distinguished from Cynanchum by the interstaminal part on the corona, fleshy and mainly triangular or ellipsoid corona lobes, and various corolla colors. In Cynanchum, various corona types have been observed, while Vincetoxicum have similar corona types among the taxa. In addition, the main floral characteristics at the species level were as follows: flowering time, inflorescence, corolla color, trichomes on the corolla surfaces, apex shape of the corona lobe, and trichomes on the ovary. This study presents the taxonomic importance of floral morphology by providing descriptions and diagnostic characteristics among the genera and species investigated.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.17-17
• /
• 2022

Leaves are an important organism for photosynthesis and transpiration. The shape of leaf is crucial factor affecting plant architecture. V-shape leaf rolling is enhancing canopy photosynthesis by increasing the CO₂ penetration and the light capture by reducing the shadow between the leaves. Therefore, moderate leaf rolling is thought to more high grain yield per area than flat leaf. We investigated 278 KRICE_CORE accession's Adaxial Leaf Rolling Index (LRI) in first heading using the following equation. For each accession, genomic DNA was used for sequencing. We sequenced the genomics with ~8 X coverage to detect SNPS. Raw reads were aligned against the rice reference (IRGSP 1.0) for SNP identification and genotype calling. To generate genotype data for GWAS, SNPs were filtered with minor allele frequency 0.05. Finally, 841,134 high-quality SNPs were used for our GWAS. The significant threshold was -log10(P)>7.23. From the results, 2 significance SNP were detected. Considering the LD block of 250kbp, 60 candidate gene were selected including Hypothetical gene and Conserved gene. In this poster, we analyzed candidate gene affecting adaxial Leaf Rolling through single-trait GWAS.