• Nutrition Research and Practice
• /
• v.8 no.6
• /
• pp.688-694
• /
• 2014

BACKGROUND/OBJECTIVES: Recent research regarding vitamin $B_6$ status including biochemical index is limited. Thus, this study estimated intakes and major food sources of vitamin $B_6$; determined plasma pyridoxal 5'-phosphate (PLP); and assessed vitamin $B_6$ status of Korean adults. MATERIALS/METHODS: Three consecutive 24-h diet recalls and fasting blood samples were collected from healthy 20- to 64-year-old adults (n = 254) living in the Seoul metropolitan area, cities of Kwangju and Gumi, Korea. Vitamin $B_6$ intake and plasma PLP were analyzed by gender and by vitamin $B_6$ supplementation. Pearson's correlation coefficient was used to determine associations of vitamin $B_6$ intake and plasma PLP. RESULTS: The mean dietary and total (dietary plus supplemental) vitamin $B_6$ intake was $1.94{\pm}0.64$ and $2.41{\pm}1.45mg/day$, respectively. Median (50th percentile) dietary intake of men and women was 2.062 and 1.706 mg/day. Foods from plant sources provided 70.61% of dietary vitamin $B_6$ intake. Only 6.3% of subjects consumed total vitamin $B_6$ less than Estimated Average Requirements. Plasma PLP concentration of all subjects was $40.03{\pm}23.71nmol/L$. The concentration of users of vitamin $B_6$ supplements was significantly higher than that of nonusers (P < 0.001). Approximately 16% of Korean adults had PLP levels < 20 nmol/L, indicating a biochemical deficiency of vitamin $B_6$, while 19.7% had marginal vitamin $B_6$ status. Plasma PLP concentration showed positive correlation with total vitamin $B_6$ intake (r = 0.40984, P < 0.0001). CONCLUSIONS: In this study, vitamin $B_6$ intake of Korean adults was generally adequate. However, one-third of subjects had vitamin $B_6$ deficiency or marginal status. Therefore, in some adults in Korea, consumption of vitamin $B_6$-rich food sources should be encouraged.

• Plant Journal
• /
• v.16 no.1
• /
• pp.28-33
• /
• 2020

This study analyzes the requirements for international standardization by studying the approach to international standardization of equipment and bulk materials in the offshore oil & gas industry, and describes the prioritization of standardized equipment and the result of standardization in the first stage. Currently, international standardization activities can be classified into three activities. First, international standardization activities of bulk materials led by three major domestic shipbuilders, second, JIP33 equipment standardization activities led by IOGP, and finally, And standardization activities of UEJIP equipment centered on classification society. This study classifies various international standards applied in the offshore oil & gas industry, and introduces the activities of standardization activities of class-leading equipment and actual application examples.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.133-140
• /
• 2018

The objective of this study is to propose a reliable mixing design procedure of concrete using artificial lightweight aggregate produced from expanded bottom ash and dredged soil. Based on test results obtained from 25 mixes, empirical equations to determine water-to-cement ratio, unit cement content, and replacement level of lightweight fine aggregates were formulated with regard to the targeted performance (compressive strength, dry density, initial slump, and air content) of lightweight aggregate concrete. From the proposed equations and absolute volume mixing concept, unit weight of each ingredient was calculated. The proposed mix design procedure limits the fine aggregate-to-total aggregate ratio by considering the replacement level of lightweight fine aggregates, different to previous approach for expanded fly ash and clay-based lightweight aggregate concrete. Thus, it is expected that the proposed procedure is effectively applied for determining the first trial mixing proportions for the designed requirements of concrete.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.81-87
• /
• 2005

This study is numerical analysis on the increasing temperature characteristics of vaporizer fin for liquefied natural gas with super low temperature. Existing LNG vaporizers use the direct contact heat transfer mode where the extreme super low temperature LNG of $-162^{\circ}C$ flows inside of the tubes and about $20^{\circ}C$air flows on outside of the fin. Recently, the vaporizers with great enhanced performance compared to conventional type have been developed to fulfill these requirements. The vaporizing characteristic of LNG vaporizer with air as heat source has a fixed iced. These characteristic cause a low efficiency in vaporizer, total plant cost and installing space can be increased. The vaporizing characteristics of LNG via heat exchanger with air are analytically studied for an air heating type vaporizer. This study is intended to supply the design data for the domestic fabrication of the thickness and angle vaporizer fin. Governing conservation equations for mass, momentum and energy are solved by STAR-CD based on an finite volume method and SIMPLE algorithm. Calculation parameter is fin thickness, setup angle and LNG temperature. If the vaporization performance of the early stage and late stage of operating is considered, the case of ${\phi}=90^{\circ}$ was very suitable. In this paper was estimated that the heat transfer was most promoted in case of THF=2mm.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2015

The objective of this study is to develop a high-performance foamed concrete made with a new mixture proportioning as an alternative of autoclaved lightweight concrete (ALC) block. For the early-strength gain of the foamed concrete under an atmospheric curing condition, the binders and chemical agents were specially contrived as follows: 3% anhydrous gypsum was added to ordinary portland cement (OPC) in which $3CaO{\cdot}SiO_2$ content was controlled to be above 60%; and the content of polyethylene glycol alkylether in a polycarboxylate-based water-reducing agent was modified to be 28%. Using these binders and chemical agents, 11 mixes were prepared with the parameters of W/B ratio (30% to 20% in a interval of 2.5%) and unit binder content ($400kg/m^3$ to $650kg/m^3$ in a interval of $50kg/m^3$). The quality and availability of the mixed foamed concrete were examined according to the minimum requirements specified in the KS for ALC block and existed conventional foamed concrete. The measured properties satisfied the minimum requirement of KS for ALC block and proved that the developed high-performance foamed concrete had considerable potential for practical application.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.115-125
• /
• 2013

In this research, a habitat model for Chinemys reevesii is suggested based on the components and variables of the Habitat Suitability Index which was determined through a series of literature researches, site surveys, and behavioral analysis. After reviewing the general habitat requirements, the site surveys(9 reservoirs) from July to December 2010, and the behavioral analysis of five Chinemys reevesii, the relationship between the behavioral and habitat use pattern was evaluated. According to the site surveys and behavioral analysis, the ecological core area(FK 50%) was about 0.96ha on average, the influence area(FK 90%) 4.22ha, and the home range was about $37.75{\pm}17.26m$ on average. As for the habitat use pattern of Chinemys reevesii, it travels through canals, and is influenced by the surrounding land uses. Also when there is a lack of food, the home range increases, and during hibernation, Chinemys reevesii prefers to be in an area within 1~2m range of water shores of fine textured soil and aquatic plants. After analyzing the information, the HSI standard was set and its components were determined as food, sunbathing and cover, aquatic environment, and spatial relationships. And the variables and the ranges of the components was determined as aquatic plant cover(0~49.81%), sandy area($3{\sim}13m^2$) and water velocity(0~60cm/s) etc. Lastly, plans and sections of the habitat model is provided designed according to the information from the researches, and problems to consider during habitat restoration was suggested in order to help understand about Chinemys reevesii habitat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1276-1284
• /
• 2014

In southeastern regions of the US, herbage systems are primarily based on grazing or hay feeding with low nutritive value warm-season perennial grasses. Nutritious herbage such as annual ryegrass (Lolium multiflorum Lam.) may be more suitable for preserving as baleage for winter feeding even with more intensive production inputs. Emerging in-line wrapped baleage storage systems featuring rapid wrapping and low polyethylene film requirements need to be tested for consistency of storing nutritive value of a range of annual ryegrass herbage. A ryegrass storage trial was conducted with 24-h wilted 'Marshall' annual ryegrass harvested at booting, heading and anthesis stages using three replicated in-line wrapped tubes containing ten round bales per tube. After a six-month storage period, nutritive value changes and fermentation end products differed significantly by harvest stage but not by bale location. Although wilted annual ryegrass exhibited a restricted fermentation across harvest stages characterized by high pH and low fermentation end product concentrations, butyric acid concentrations were less than 1 g/kg dry matter, and lactic acid was the major organic acid in the bales. Mold coverage and bale aroma did not differ substantially with harvest stage or bale location. Booting and heading stage-harvested ryegrass baleage were superior in nutritive value to anthesis stage-harvested herbage. Based on the investigated nutritive value and fermentation characteristics, individual bale location within in-line tubes did not significantly affect preservation quality of ryegrass round bale silages.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.693-707
• /
• 2015

The efficiency of wind turbines (WT) is primarily reflected in their ability to generate electricity at any time. Downtimes of WTs due to "conventional" inspections are cost-intensive and undesirable for investors. For this reason, there is a need for structural health monitoring (SHM) systems, to enable service and maintenance on demand and to increase the inspection intervals. In general, monitoring increases the cost effectiveness of WTs. This publication concentrates on the application of two vibration-based SHM algorithms for stability and structural change monitoring of offshore WTs. Only data driven, output-only algorithms based on stochastic subspace identification (SSI) in time domain are considered. The centerpiece of this paper deals with the rough mathematical description of the dynamic behavior of offshore WTs and with the basic presentation of stochastic subspace-based algorithms and their application to these structures. Due to the early stage of the industrial application of SHM on offshore WT on the one side and the required confidentiality to the plant manufacturer and operator on the other side, up to now it is not possible to analyze different isolated structural damages resp. changes in a systematic manner, directly by means of in-situ measurement and to make these "acknowledgements" publicly available. For this reason, the sensitivity of the methods for monitoring purposes are demonstrated through their application on long time measurements from a 1:10 large scale test rig of an offshore WT under different conditions: undamaged, different levels of loosened bolt connections between tower parts, different levels of fouling, scouring and structure inclination. The limitation and further requirements for the approaches and their applicability on real foundations are discussed along the paper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.872-879
• /
• 2007

A study was conducted to investigate the seasonal changes in nutrient composition of pasture, voluntary intake and digestibility of sheep grazing an introduced Leymus chinensis pasture located in western Jilin Province, China. The whole-plant of L. chinensis and the samples simulating ingestion by sheep (simulating sample) were collected in spring (May, 2004), summer (July, 2004), autumn (September, 2004) and the end of winter (April, 2005). The contents of gross energy (GE), organic matter (OM), crude protein (CP), neutral detergent fibre (NDF), acid detergent fibre (ADF) and alkanes were determined. Voluntary intake and apparent digestibility of the nutrients in each season were also examined using 6 mature Chinese Northeast Merino ewes (differed among the seasons) grazing on a paddock of 1 ha size. The apparent digestibilities of GE, dry matter (DM), OM, CP, NDF and ADF of L. chinensis were significantly greater (p<0.05) in spring and summer than in autumn and winter. Metabolizable energy (ME) content was 12.13, 11.62, 8.66 and 10.40 MJ/kg DM for L. chinensis in spring, summer, autumn and winter respectively, and the corresponding voluntary feed intakes were 91, 119, 59 and 58 g/d per kg metabolic weight ($LW^{0.75}$). The ME contents and DM intakes in autumn and winter were significantly lower than in spring and summer (p<0.05). The intake of L. chinensis pasture was sufficient to provide ME requirements for maintenance by the dry ewes in all the seasons, but inadequate for maintenance protein requirement in winter. (Supported by funds from National Basic Research Program of China, Grant No. 2007CB106800).

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.259-276
• /
• 2006

As the use of digital systems becomes more prevalent, adequate techniques for software specification and analysis have become increasingly important in nuclear power plant (NPP) safety-critical systems. Additionally, the importance of software verification and validation (V&V) based on adequate specification has received greater emphasis in view of improving software quality. For thorough V&V of safety-critical systems, V&V should be performed throughout the software lifecycle. However, systematic V&V is difficult as it involves many manual-oriented tasks. Tool support is needed in order to more conveniently perform software V&V. In response, we developed four kinds of computer aided software engineering (CASE) tools to support system specification for a formal-based analysis according to the software lifecycle. In this work, we achieved optimized integration of each tool. The toolset, NuSEE, is an integrated environment for software specification and V&V for PLC based safety-critical systems. In accordance with the software lifecycle, NuSEE consists of NuSISRT for the concept phase, NuSRS for the requirements phase, NuSDS for the design phase and NuSCM for configuration management. It is believed that after further development our integrated environment will be a unique and promising software specification and analysis toolset that will support the entire software lifecycle for the development of PLC based NPP safety-critical systems.