• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.276-284
• /
• 1993

The ABB-CE System-80 reactor power cutback system(RPCS) is designed to enable continuous operation of the reactor without trip in the events of the loss of one of the two main feedwater pumps and loss of load, and thus improves plant availability in a cost effective manner. In this study expansion of RPCS has been investigated for continuous reactor operation without trip in the event of an inward control element assembly(CEA) deviation including a single rod drop. Under the expanded function of RPCS the control system will provide a rapid core power reduction on demand by releasing CEAs to drop into the core and reduce the turbine power, if necessary, to follow the reactor power variation. This design feature which is included as the new design features to be incorporated in the ABB-CE System-80+ meets the EPRI advanced light water reactor(ALWR) requirements. For this study core analysis models of System-80+ have been developed to simulate the nuclear steam supply system(NSSS) response as well as the RPCS initiation of rapid CEA insertion. The results of this study demonstrate that the reactor trip can be avoided in the event of inward CEA deviation including a single rod drop by the RPCS initiation and thus the plant availability and capacity factor would be increased.

• Korean Journal of Plant Resources
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2018

Amaranth (Amaranth caudatus) is attracting attention as a preference crop in Gyeongsangbuk-do province. To determine its growth potential and cultivation requirements, we investigated its growth characteristics, dry matter productivity, and grain yield according to the growing period. Growth and dry matter productivity were significantly higher for plants that were sown on May $10^{th}$ when the temperature was the highest, whereas the yield was significantly higher for plants that were sown on April $10^{th}$. Amaranth grain yield ranged from 96 to 243 kg according to the sowing date and cultivation year. The optimum harvest time for plants that were sown on April $10^{th}$, May $10^{th}$, and June $10^{th}$ were 120, 110, and 110 days after seeding, respectively. The mean temperature and growing period had a significant quadratic function with yield. Based on these equations, the optimum growing temperature was estimated as $20.6^{\circ}C$ and the optimum growing period as 104-119 days after seeding.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.368-375
• /
• 2013

Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.373-377
• /
• 2007

Alfalfa silage and corn silage are the major dairy feeds in most dairy operations in Michigan, USA. In recent years, the need to improve digestible fiber and dry matter intake of forages to meet the nutrient requirements of high yielding dairy cows and the willingness to plant corn specifically for silage has led plant breeders to focus on the brown mid-rib (BMR) trait. The objective of this study was to investigate the effect of different ratio of alfalfa to BMR corn silage and ration level of forage neutral detergent fiber (NDF) on animal performance of lactating cows in the Upper Peninsula of Michigan. This study was conducted at the Upper Peninsula Experiment Station of Michigan State University in Chatham, Michigan, USA. Two different ratios of forage type (high alfalfa silage/low BMR corn silage, AS, and high BMR corn silage/low alfalfa silage, BMRCS) and two different dietary NDF contents (27% NDF, 27 = low forage/high grain feeding, and 33% NDF, 33 = high forage/low grain feeding) were used. The experimental design was a $4{\times}4$ Latin Square with 20 milking cows (12 multiparous and 8 primiparous). This trial had four 21-day periods with 14 d adaptation and 7 d data collection. Milk yield and body condition score (BCS) on the AS-27, BMRCS-27 and BMRCS-33 treatments were significantly (p<0.05) higher than on the AS-33 treatment. Dry matter intake of the AS-27 and BMRCS-27 treatments was significantly (p<0.05) higher than for the AS-33 and BMRCS-33 treatments. Milk urea nitrogen (MUN) on the AS-33 treatment was significantly (p<0.05) higher than on the other diet treatments. A key finding of this study was that the BMRCS-33 (higher amounts of brown mid-rib corn silage than alfalfa silage, high forage and low grain feeding diet at 33% NDF) led to the equal highest milk production whilst having the equal lowest dry matter intake. This study demonstrated that the diet with higher ratio of highly digestible NDF forage such as brown mid-rib corn silage to alfalfa silage could lower grain feeding in the ration.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.293-305
• /
• 2015

In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 $MW_{th}$ and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.333-338
• /
• 1987

In order to establish the biological treatment system which can be used for treatment of waste aster from acetaldehyde plant, it was investigated optimum nutrient requirements and growth conditions by mixed culture of Micrococcus roseus AW-6, Micrococcus luteus AW-22, Microbacterium lacticum AW-38 and Microbacterium laevaniformans AW-41 as well as the effect of coagulants and neutralization reagents. Also, it was carried out the continuous culture as well as batch culture to treat the waste water by mixed culture of these strains. The COD removal rate was reached to maximum state for 96hrs culture at pH7.0 and $30^{\circ}C$ NaOH as the neutralization reagents was the most effective, but the coagulants had no effect on the COD remonal rate and the optimum dilution times for treatment were 10 fold. The COD removal rate was also increased by supplimenting 200 ppm $NH_{2}NO_{3}$, 50 ppm $KH_{2}PO_{4}$, 15 ppm $CaCl_{2}$ and 1 ppm $MgSO_{4} \cdot 7H_{2}O $ as additional nutrients. The removal rate coefficient $K_{1}$ on the batch culture was $4.5\times 10^{-6}$, and the detention time for BOD removal rate of 85% was approximately 45hrs. The COD of waste water was reduced to 15% of its initial value by the continuous culture. The COD and BOD of the effluents were to be about 60 ppm and 40 ppm, respectively, and final pH was 7.0.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.35-47
• /
• 2022

Expansion of potato production areas can improve the food security in North Korea because the given crop has less requirements for agricultural materials and facilities. The Global Agro-Ecological Zones (GAEZ) model, which was developed to evaluate climate suitability under different cultivation conditions, was used to identify potential areas for the potato production. The spatial estimates of crop suitability under low and high input management conditions were downloaded from the GAEZ data portal. The values of suitability were obtained at the potato occurrence sites retrieved from the Global Biodiversity Information Facility (GBIF) database. The suitable areas for the potato production were identified using a threshold value derived from the suitability estimates at the occurrence sites. It was found that 90% of the occurrence sites had the suitability index value >3,333, which was set to be the threshold value. The suitable areas in North Korea were summarized by province and county. Rice cultivation areas were excluded from the analysis. The reported relative acreage of potato production was better represented by the suitable areas under the low input management options than the high input conditions. The suitable areas also had a similar distribution to the reported acreage of potato production by county. These results indicated that the GAEZ model would be useful to identify the candidate production areas, which would facilitate the increases in potato production especially under future climate conditions. Furthermore, monthly maps of crop suitability can be used to design cropping systems that would improve crop production under the limited use of agricultural materials and facilities.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.896-905
• /
• 2012

Recently, the application of the plastic material to automotive components and structures has steadily increased to satisfy demands on the saving of overall weight and the improvement of energy efficiency. The objective of this paper is to investigate the development of a bumper back-beam using a thermoplastic olefin (TPO). The bumper back-beam was designed to be manufactured from the injection molding process. In order to obtain a proper design of the bumper back-beam, three-dimensional finite element analyses were performed for various design alternatives. Stress-strain curves for different strain rates were measured by high speed tensile tests of the TPO to consider strain rate effects in the FEA. The influence of the sectional shape and the rib formation on the contact force-intrusion curves, the deflection and the energy absorption rate of the bumper back-beam was examined. From the results of the examination, a proper design of the bumper back-beam was acquired. The bumper back-beam consisting of TPO was fabricated from the injection moulding process and the vibration welding. Pendulum crash tests were carried out using the fabricated bumper back-beam. The results of the tests showed that the designed bumper back-beam can satisfy requirements of the federal motor vehicle safety standard (FMVSS). Through the comparison of the previously designed bumper back-beam with the newly designed bumper back beam, it was noted that the weight of the designed bumper back-beam is lighter than that of the previously designed bumper back beam by nearly 16 %. In addition, it was considered that the newly designed bumper back beam can improve recycling of the bumper back-beam.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.128.2-128.2
• /
• 2010

For stationary 1kW-class fuel cell systems to be used widely, it is essential to achieve dramatic improvements in system durability as well as cost reduction. In order to address this engineering challenge, it is important to develop innovative technologies associated with BOP components. According to this background, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". The objectives of this project are to develop fundamental technologies to meet these requirements, and to improve the performance and functionality of BOP components with reasonable price. The project consortium consists of Korea's leading fuel cell system manufacturers, BOP component manufacturers which technologically specialized, and several research institutions. This paper is to provide a summary of the project, as well as the achievements made through the 1st period of the project(2009~2010). Several prototypes of BOPs - Cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, valves and power conditioning systems - had been developed through this project in 2010. As results of this project, it is expected that a technological breakthrough of these BOP components will result in a substantial system cost reduction.

• Nutrition Research and Practice
• /
• v.8 no.6
• /
• pp.688-694
• /
• 2014

BACKGROUND/OBJECTIVES: Recent research regarding vitamin $B_6$ status including biochemical index is limited. Thus, this study estimated intakes and major food sources of vitamin $B_6$; determined plasma pyridoxal 5'-phosphate (PLP); and assessed vitamin $B_6$ status of Korean adults. MATERIALS/METHODS: Three consecutive 24-h diet recalls and fasting blood samples were collected from healthy 20- to 64-year-old adults (n = 254) living in the Seoul metropolitan area, cities of Kwangju and Gumi, Korea. Vitamin $B_6$ intake and plasma PLP were analyzed by gender and by vitamin $B_6$ supplementation. Pearson's correlation coefficient was used to determine associations of vitamin $B_6$ intake and plasma PLP. RESULTS: The mean dietary and total (dietary plus supplemental) vitamin $B_6$ intake was $1.94{\pm}0.64$ and $2.41{\pm}1.45mg/day$, respectively. Median (50th percentile) dietary intake of men and women was 2.062 and 1.706 mg/day. Foods from plant sources provided 70.61% of dietary vitamin $B_6$ intake. Only 6.3% of subjects consumed total vitamin $B_6$ less than Estimated Average Requirements. Plasma PLP concentration of all subjects was $40.03{\pm}23.71nmol/L$. The concentration of users of vitamin $B_6$ supplements was significantly higher than that of nonusers (P < 0.001). Approximately 16% of Korean adults had PLP levels < 20 nmol/L, indicating a biochemical deficiency of vitamin $B_6$, while 19.7% had marginal vitamin $B_6$ status. Plasma PLP concentration showed positive correlation with total vitamin $B_6$ intake (r = 0.40984, P < 0.0001). CONCLUSIONS: In this study, vitamin $B_6$ intake of Korean adults was generally adequate. However, one-third of subjects had vitamin $B_6$ deficiency or marginal status. Therefore, in some adults in Korea, consumption of vitamin $B_6$-rich food sources should be encouraged.