• 한국농촌건축학회논문집
• /
• 제1권3호
• /
• pp.3-12
• /
• 1999

This research studies into the plane type classification and reviews its transition which has been used in the basic research of the traditional houses on the korean peninsula. The conclusions are as follows. Until now, plane type classification of traditional houses on the Korean peninsula were used to explain the characteristics of the region, or social class of the time. This classification was not used as a research tool to discover the hidden principals of the development process of traditional houses nor to attempt to restore the traditional habitation culture of the Korean peninsula.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.155-160
• /
• 2006

Although several reports have been introduced about dual plane augmentation mammaplasty, the description of periareolar approach dual plane augmentation mammaplasty was few. This article describes specific characteristics, and different classification and techniques for the periareolar dual plane breast augmentation while postoperative scars resulted from inframammary crease approach caused complaints. A total of 124 patients(248 breasts) had periareolar dual plane augmentation surgery from 1998 to 2004. Anatomic implants were used in 43 cases. Most of the patients were satisfied with the outcomes of periareolar dual plane augmentation. Periareolar dual plane augmentation mammaplasty adjusts implant and tissue relationships to ensure adequate soft-tissue coverage while optimizing implant-breast parenchymal dynamics to offer increased benefits and fewer faults compared to a single pocket location in a wide range of breast types with minimal scars. Two types of dual plane classifications are discussed in this study for the periareolar approach exclusively. The boundaries of retroglandular dissection remain constant, as the costal origin of pectoralis major are divided. Type A dual plane implies that the inferior edge of pectoralis muscle lies below the inferior areolar border, and type B dual plane implies that the inferior edge lies above the superior areolar border.

• 치과방사선
• /
• 제24권2호
• /
• pp.227-236
• /
• 1994

The purpose of this study was to observe mandibular condyle shape in an asymptomatic population. In order to carry out this study, 96 temporomandibular joints in 48 adults(22 males, 26 females), who were asymptomatic for temporomandibular disturbances and had no history of prosthodontic or orthodontic treatments, were selected, and radiographed using the Sectograph(Denar Co., U.S.A.) for lateral and frontal individualized corrected TMJ tomograph and submentovertex radiograph. Mandibular condyles were classified morphologically, and measured medioateral and anteroposterior dimensions and condylar angulation. The obtained results were as follows. 1. In the classification of condyle shape on lateral tomographs, 94.8% were convex type and 5.2% were angled type. 2. In the classification of condyle shape on frontal tomographs, 45.3% were convex type, 32.0% were round type, 16.0% were flat type, and 6.7% were angled type. 3. In the classification of condyle shape on submentovertex radiographs, 34.5% were flat-convex type, 22.9% were flat-flat type, 20.8% were concave-convex type, 19.8% were convex-convex type, and 1.0% were concave-flat type and convex-flat type. Concave-concave type, convex-concave type, and flat-concave type were not observed. 4. The average mediolateral legth of the condyle was 19.3㎜ and the average anteroposterior length was 9.4㎜. The average angle between the long axis of condyle and the coronal plane made on submentovertex view was 19.6 degrees.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.289-294
• /
• 2008

Purpose: The nasal bone fracture is known as the most common facial fracture. Several authors reported the classification of nasal bone fracture. Stranc classified the type of nasal fractures based on a pattern of impaction and level of injuries. Stranc classification proposed here is based on careful clinical observation and relates to both treatment and prognosis. The aim of this study is to determine any predictive value to the preoperative classification of nasal fracture, using the description by Stranc and Robertson. Methods: We reviewed 310 patients with nasal bone fracture treated at our hospital for last two years. Results: Lateral impact type of nasal bone fracture predominated more than frontal impact in the ratio of 2.3:1. The most common type of Stranc classification was lateral impact plane I(48.4%). Male predominated more than female in the ratio of 3:1. The most frequent age group was first decade(27.1%), second decade in frontal impact(30.5%), first decade in lateral impact (30.7%). The most common etiology was violence (31.3%) followed by slip down(21.3%), and traffic accident(18.1 %).The most common associated fracture was orbital(22.9%) followed by zygoma(10%), and maxilla (6.1%). The most common complication was septal deviation(20.0%) in frontal impact, and nasal deformity (26.0%) in lateral impact. The incidence of nasal deformity in lateral impact(26.0%) was more higher than frontal impact(15.8%) Conclusion: By assessing the pathomechanics and resultant degree of injury to the nasal skeleton, a better understanding of the treatment plan and prognosis was obtained. Using this information, satisfactory informed patient consent can be obtained.

• Composites Research
• /
• 제33권3호
• /
• pp.108-114
• /
• 2020

Piecewise Integrated Composite (PIC) 보는 하중 유형에 따라 구간을 나누어, 각 구간마다 하중 유형에 강한 복합재료의 적층 순서를 배열한 보이다. 본 연구는 PIC 보의 구간을 머신 러닝의 일종인 k-NN(k-Nearest Neighbor) 분류를 통해 나누어 기존에 제시되었던 PIC 보에 비해 우수한 굽힘 특성을 갖게 하는 것이 목적이다. 먼저, 알루미늄 보의 3점 굽힘 해석을 통하여 참조점에서의 3축 특성(Triaxiality) 값 데이터를 얻었고, 이를 통해 인장, 전단, 압축의 레이블을 가진 학습 데이터가 만들어진다. 학습 데이터를 통해 각 면마다 독립적인 k-NN 분류 모델을 구성하는 방법(Each plane)과 전체 면에 대한 k-NN 분류 모델을 구성하는 방법(one part)을 이용하여 k-NN 분류 모델을 생성하였고, 하이퍼파라미터의 튜닝을 통하여 다양한 하중 충실도를 도출하였다. 가장 높은 하중 충실도를 가진 k-NN 분류 모델을 기반으로 보를 매핑(mapping)하였고, PIC 보에 대하여 유한요소 해석을 진행한 결과, 기존에 제시되었던 PIC 보에 비해 최대하중과 흡수 에너지가 커지는 특성을 보였다. 하중 충실도를 수동으로 조절하여 100%로 만든 PIC 보와 비교하였을 때, 최대하중과 흡수에너지가 미소한 차이가 나타났으며 이는 타당한 하중 충실도로 보여진다.

• 동의생리병리학회지
• /
• 제22권4호
• /
• pp.718-724
• /
• 2008

In order to classify diseases of oriental medicine in liaison with International Classification of Diseases, there should be intermediation and sharing concepts between the two in addition to proper classification. Classification units were settled for differentiation of diseases or syndromes first. And second, the standard forms of disease classification system were proposed. Third, this classification system was made of serial groupings of syndrome under the traditional disease name. Fourth, the location of disease and the interrelation between different syndromes were depicted with diagram in order to define more clearly. As the results and conclusion, The classification units were composed of 2 categories; topology, organ, meridian, somatic structure, body fluid units for description and various regulatory unit terms of western and traditional medicine for explanation. The mixed classification model of western diseases and traditional syndromes(證) was adopted as a fundamental classification system containing disease by exterior pathogen, systemic internal diseases, psychoneuronal diseases, metabolic diseases, diseases of sense organs, supportive structure diseases, obstetric-gynecology diseases, child diseases, 4-type constitutional diseases. And those were differentiated with generalized, localized, functional, oncogenic, environmental features in detail. The cause, site, condition, dispositions must be expressed in each disease name too. The types of diagnosis using classification system are principal and final diagnosis, principal procedure, main conditions, and these are applied to this Korean classification system equally. For more clarification of differentiation, a plane topological map and three dimensional coordinates were proposed to manifest the location, features and relation of disease itself or each other.

• 터널과지하공간
• /
• 제5권4호
• /
• pp.308-317
• /
• 1995

The stability study on the rock slope where have produced failures in Boryung dam site was evaluated using the streonet analysis techniques. SMR(Slope Mass Rating) approach which is suitable for preliminary assessment of slope stability in rock was also carried out for rating rock mass. The 3-4 major discontinuity sets are distributed and all type of failure(plane, wedge and toppling failure) are presented in this slope face. The dip of slope must be lowered to friction angle(26degree), otherwise the possibility of plane and toppling faiue will always exist in this slope.

• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.126-133
• /
• 2008

최근 고객중심으로의 시장변화는 자연히 주택공급업체로 하여금 품질의 경쟁시대를 맞이하도록 하였다. 이러한 품질경쟁시대에 부응하는 주택상품 기획을 위하여 단위세대 품질의 차별화 사례 및 대상 부위에 대한 유형분석 등을 실시하여 공동주택의 단위세대에 대한 품질의 차별화 유형 분류체계를 구축하였다. 건축적 요소인 평면요소와 인테리어요소는 공간위계를 기준으로 품질요소를 세분하여 분류체계를 구축하였고, 사용자 편익과 관련 있는 설비시스템부위는 친환경성, 안전성, 에너지절약효과, 편리성으로 구분하여 분류체계를 구축하였으며, 제품요소는 가구와 설치제품 및 편의품으로 구분하여 분류체계를 구축하였다. 향후 이 분류체계는 공동주택상품의 마케팅 전략수립단계에서의 제품 포지셔닝과 상품기획단계에서의 상품의 차별화요소 결정에도 유용하게 활용할 수 있을 것이다.

• 대한두개안면성형외과학회지
• /
• 제23권5호
• /
• pp.205-210
• /
• 2022

Background: Nasal bone fractures are the most common type of facial bone fracture, but are under-studied in adults above 65 years of age. Therefore, we investigated the epidemiology and patterns of nasal bone fractures among older adults in comparison to different age groups. Methods: This retrospective study included 2,321 nasal bone fracture patients who underwent surgery at our hospital from January 2010 to December 2017. The patients were classified by age as preschoolers, school-age children, young and middle-aged adults, and the elderly. We performed pairwise comparisons between elderly patients and each other age group in terms of sex, cause of injury, and fracture type. Results: The 2,321 nasal bone fracture patients included 76 elderly patients (50 men [65.8%] and 26 women [34.2%]). In these patients, the two most common injury causes were falling or slipping down (n= 39; 51.3%) and road traffic accidents (n= 19; 25.0%). According to the Stranc and Robertson classification, the most common force vector was lateral, and plane 2 fractures with lateral forces predominated. Conclusion: The elderly showed similar patterns of nasal bone fractures to those observed in young and middle-aged adults, but significant differences from preschoolers (in the injury vector and plane of fracture) and from school-age children (in the sex ratio and plane of fracture). However, elderly patients presented significantly different epidemiological characteristics compared to the other three groups. Therefore, it is necessary to improve the quality of life of the elderly and prepare for the upcoming super-aged society by taking steps to reduce the incidence and severity of fractures. Possible options for doing so include strengthening individual-level safety factors and expanding the social safety net for the elderly.