• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1098-1106
• /
• 2007

This paper presents active antenna diplexers implemented into an ultra-wideband CPW(Coplanar Waveguide) fed monopole antennas. The proposed active antenna diplexer is designed to direct interconnect the output port of a wideband antenna to the input port of two active(HEMT) devices, where the impedance matching conditions of the proposed active integrated antenna are optimized by adjusting CPW(Coplanar Waveguide) feed line to be the length of 1/20 $\lambda_0$(@5.8 GHz) in planar type wideband antenna. The measured bandwidth of the active integrated antenna shows the range from 2.0 GHz to 3.1 GHz and from 5.25 GHz to 5.9 GHz. The measured peak gains are 17.0 dB at 2.4 GHz and 15.0 dB at 5.5 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2223-2231
• /
• 2015

In this paper, we propose a built-in antenna for wireless USB dongle which has a modified structure from the existing planar monopole antenna. The proposed antenna implemented a dual-band characteristic by inserting Strip1, Strip2, Strip3 into the monopole structure combined with 'n' shape and feeded 50-Ω using coaxial cable. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.6, and its overall size is 10 mm × 50 mm × 1mm. Based on the measurement results of the return loss, it was confirmed to satisfy the dual band resonance characteristics of 740 MHz (2.3 ~ 2.7 GHz) and 1,200 MHz (5.15 ~ 5.825 GHz) by -10 dB. In addition, we obtain the omni-directional radiation pattern measurements in the operating frequency bands, and the maximum gain of the proposed antenna has 2.26~3.81 dBi in the 2.4 GHz band and 2.21~5.79 dBi. in the 5.5 GHz band, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.1
• /
• pp.70-74
• /
• 2015

In this paper, we have illuminated the radiation modes of rectangular planar antennas to interpret the nature of the wideband characteristic upon which formulas for bandwidth prediction are presented. Rectangular planar antennas are being investigated by many researchers in virtue of relatively simple design and fabrication procedures to replace the cylindrical monopoles. But the design principle for rectangular planar antennas is still based on that of cylindrical monopoles, and the nature of the wideband characteristic and the formula to estimate the upper band frequency are not analyzed yet. In this research, we have shown the patterns of the radiation modes explaining the wideband characteristic and also proposed the upper band frequency with minor modification for the lower band frequency formula based on mode formation principles. Finally we have confirmed the validity of our results, within 10 % accuracy, by the application to some published results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1184-1187
• /
• 2011

In this letter, a planar monopole UWB antenna with dual band-notched characteristics is proposed. The band-stop characteristics is realized by embedding the 1st/3rd order Hilbert-curve slots on the patch. With the dimension adjustment of each Hilbert-curve slots, the band rejection from 3.3 to 3.7 GHz and from 5.3 to 6 GHz can be accomplished easily. The VSWR and radiation pattern of the fabricated antenna are measured, and the proposed antenna would be adequate to a UWB applications.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.44-49
• /
• 2017

A compact planar microstrip-fed ultra-wideband (UWB) antenna with a dual band-notched for UWB application is presented and analyzed. By inserting a U-shaped slot and inverted U-shaped slot into the pot-shaped radiator, two notched bands are achieved. By optimizing the width and length of the U-shaped slots and inverted U-shaped slot, a desired bandwidth of voltage standing wave ratio (VSWR) less than 2.0 can be achieved, ranging from UWB bands with notched dual bands. The proposed antenna is fabricated on an inexpensive FR-4 substrate with overall dimensions of $28.0mm{\times}39.5mm$. The measured results confirm that the proposed antenna covers from 1.775 to over 13.075 GHz with two rejection bands of around 3.325-3.925 GHz and 5.3125-6.025 GHz. In addition, the proposed antenna showed good radiation characteristics and gains in the UWB bands.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.151-153
• /
• 2010

In this paper, the tri-band planar monopole microstrip antenna which stimulaneously meets the three bands such as TRS, WLAN and DMB is designed. The designed antenna size was smaller using CPW-fed structure that shows a ground-plane and a patch-plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.04. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the three bandwidths.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.349-356
• /
• 2015

In this paper, MIMO antenna with low correlation for LTE band 5(824~894 MHz) was designed by adopting monopole antenna and slot antenna. Based on ground characteristic mode theory, MIMO antenna was designed using different types of antennas for enhancement of correlation. MIMO antenna using PIFA and slot type antennas is proposed and correlation coefficient was compared with MIMO antenna using two PIFAs. Average correlation coefficient of MIMO antenna using two PIFAs was 0.71 but the proposed MIMO antenna had very low correlation coefficient of 0.17.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.283-291
• /
• 2012

In this paper, a compact antenna is designed for the UWB lower half-band WVAN Gbps data-rate transceiver. The proposed antenna broadens the bandwidth less than -10 dB by placing the ring stubs and an open stub on the rectangular monopole above the partial ground and creating multiple resonant current paths. The designed antenna goes through the electromagnetic simulation and is fabricated and the implemented antenna has the characteristics of the return loss lower than -10 dB, the antenna gain greater than 5 dBi, and the efficiency over 80 % in the UWB lower half-band ranging from 3.197 GHz to 4.732 GHz. Therefore, it is thought that the proposed antenna is suitable for the size-reduced and excellently performing wireless communication transceiver.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.473-478
• /
• 2015

In this paper, we suggest a flexible multiband antenna which can be equipped on an inflatable life-jacket. The antenna can send distress alert and location data of survivors to assist rescue operation when crew or people are in distress. The antenna operate in three frequency bands such as VHF-DSC band (156MHz), COSPAS-SARSAT band (406MHz) and GPS band (1,575MHz). The GPS band is implemented with a square ring-slot planar antenna, the COSPAS-SARSAT band and the VHF-DSC band antenna is implemented by monopole type. In order to give flexibility of substrate to be equipped on life-jacket, FR4-epoxy substrate of thickness 0.2mm is used to make antenna. The reflection coefficients of the fabricated antenna are -8.8dB, -20.4dB and -10.7dB at each bandwidth like VHF-DSC, COSPAS-SARSAT and GPS band, respectively, when people are wearing life-jacket integrated multiband antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.557-564
• /
• 2015

In this paper, the compact antenna for handsets is designed using FR-4 substrate for LTE(905-960 MHz), WCDMA(1922.8-2167.2 MHz), DCS(1710.2-1879.8 MHz), US-PCS(1850.2-1989.8 MHz), WLAN(2400-2483 MHz). The CPW line with many advantages and a spiral geometry for miniaturization is proposed. Widths of a spiral line are constant, and three stubs are added to broaden the bandwidth. Lengths and widths of three stubs are gradually changed. And proposed antenna is optimized for VSWR<3, designed, and fabricated. The dimension of this antenna is only $40{\times}30{\times}1mm3$ which is compact. It has been demonstrated by experiment that the compact planar antenna can be used as the mobile communication LTE antenna for 4G.