• 제목/요약/키워드: planar figure

검색결과 26건 처리시간 0.027초

BIM 기반 외피전개도 자동추출의 고려사항 및 표준화 연구 (Issues and Standardization technology in Automatic Extraction to Create an Planar Figure of Envelope based on BIM)

  • 박영준;김창민;박병윤;최창호
    • 한국건축친환경설비학회 논문집
    • /
    • 제12권6호
    • /
    • pp.591-605
    • /
    • 2018
  • The information on the planar figure of the building envelope is commonly required in various criteria related to the energy performance of the building. However, since the method of creating varies depending on each criterion, the information displayed in the planar figure of the building envelope differs considerably according to the person making the figure. In this regard, this study sought to derive the commonly required information for the unification of the information included in the planar figure of the building envelope, and thus examine the standardization of the planar figure of the building envelope based on BIM. Towards this end, 1) the required information about the planar figure of the building envelope was derived through the literature review and case analysis results submitted to the energy performance evaluation agencies, and 2) the standardized output technology using IFC was investigated based on the required information. Therefore, it is expected that the findings of this study will help to create a general-purpose planar figure for the building envelope, and this study can serve as the preliminary research for automatically extracting the information on the planar figure of the building envelope.

초등학교 교과서 겨냥도와 전개도의 고찰 -역대 교육과정과 외국 교과서의 검토를 바탕으로- (A Study on Sketch Maps and Planar Figures in Elementary School - In Consideration of Successive Korean Curriculums and Foreign Textbooks)

  • 홍갑주;이호석
    • 대한수학교육학회지:학교수학
    • /
    • 제17권4호
    • /
    • pp.531-553
    • /
    • 2015
  • 본 연구에서는 초등학교 수학교과의 전통적 교육내용인 겨냥도와 전개도에 대해 논의하였다. 우선 현행 2009 개정교육과정 교과서 일부 내용에서 난이도와 제시의도 등의 문제를 제기하고, 보다 일반적인 관점에서 겨냥도와 전개도의 위상에 대한 의문을 제기하였다. 이를 논하기 위해, 전개도와 겨냥도가 교육과정에 따라 어떻게 다루어졌는지 조사하였고, 외국의 교과서를 우리나라와 비교하여 살펴보았다. 이를 바탕으로 현행 교과서에 지금과 같은 내용이 들어오게 된 맥락을 고찰하고, 그림 표현의 문제, 입체도형 구성의 문제라는 관점에서 시사점을 논의하였다.

개방형 자기공명영상시스템용 경사자계코일의 새로운 설계기법 (A new gradient coil design technique for open magnetic resonance imaging systems)

  • 이수열;박부식;이정한;이완
    • 전자공학회논문지S
    • /
    • 제34S권1호
    • /
    • pp.72-79
    • /
    • 1997
  • Most open magnetic resonance imaging systems have used the planar gradient coils whose inductances were minimized through the magnetic energy minimization procedure in the spatial frequency domain. Though the planar gradient coils have smaller inductance than conventional gradient coils, the planar gradient coils often suffer from their poor magnetic field linearity. Scaling the spatial frequencies of the current density function designed by the magnetic energy minimization, magnetic field linearity of the planar gradient coils can be greatly improved with small sacrifice of gradient coil inductance. We have found that the figure of merit of the planar gradient coils, defined by the gradient strength divided by the linearity error and the inductance, can be improved by proposed technique.

  • PDF

플라나변압기와 SiC 기반의 전기자동차용 3kW 고전력밀도 DC-DC 컨버터 개발 (Development of Planar Transformer and SiC Based 3 kW High Power Density DC-DC Converter for Electric Vehicles)

  • 김상진;석채영;라마단;최세완;유병우;박상훈
    • 전력전자학회논문지
    • /
    • 제26권2호
    • /
    • pp.112-119
    • /
    • 2021
  • This study proposes a design method of high-power-density and high-efficiency low-voltage DC-DC converters using SiC MOSFET and the optimized planar transformer design procedure based on the figure-of-merit. The secondary rectifying circuit of the phase-shifted full-bridge converter is compared to achieve high power density and high efficiency, and the phase-shifted full bridge converter with a current-doubler rectifier is selected. The planar transformer is designed by the proposed optimized design procedure and verified by FEA simulation. To validate the proposed design method, experimental results from a 3 kW prototype are provided. The prototype achieved 95.28% maximum efficiency and a power density of 2.98 kW/L.

조선 후기와 현대의 여자한복 형태 비교 -Delong의 복식형태 분류체계를 적용하여 (A Comparison on the Form in Women's Hanbok between the Later Chosun Dynasty and Modern Times- Applying Delong's Dividing System for Apparel Body Construct)

  • 김순영;남윤자
    • 복식
    • /
    • 제52권5호
    • /
    • pp.61-77
    • /
    • 2002
  • The purpose of this study is to investigate difference and likeness on the form in women's Hanbok between the later Chosun Dynasty and modern times based on Belong's observing system for 'Apparel-Body Construct'. Belong's framework is composed 5 pairs of contrast word -'Closed or Open', 'Whole or Par', 'Planar Separation or Planar integration'. 'Flat or Rounded', and 'Determinate or Indeterminate'. Major findings of this study are as follows. First, the form of women's Hanbok in later Chosun Dynasty is 'Variably Closed', 'Part' and 'Rounded', whereas that in modern is 'Open', 'Whole' and 'Flat' Women's Hanbok of modern is lesser convex, and more open than that of later Chosun Dynasty according to increasing use of transparent textiles. Moreover, in comparison with old style, that of modern has the tendency of perceiving primarily whole feature by organic linkage of parts. Because of loose fit of Jeogori and rigid DongJong etc, characteristic of 'Plat' strengthened in modern Hanbok. Secondly, women's Hanbok in the later Chosun Dynasty and modern has common properties of 'Planar Seperation' and 'Determinate'. Women's Hanbok belongs to 'Planar Seperation', because the effect cognized to figure and ground. can be found between small parts and whole of Jegori, or can be found between the head and face. Jeuori and waist band, and Chima and under ware. Further more. it can be classified into 'Determinate'. because it use textiles which have no pattern un it or which show a subtle surface effect by texture changing.

기판온도가 MgO(001) 기판위에서 에피택시성장한 Fe스파터박막의 특성에 미치는 영향 (Effects of Substrate Temperature on the Properties Sputtered Fe Films Epitaxially Grown on Mgo(001))

  • 김동우;장평우;김원태;유성초
    • 한국자기학회지
    • /
    • 제9권4호
    • /
    • pp.184-189
    • /
    • 1999
  • 두께 1000$\AA$ 인 순철박막을 MgO(001)기판위에 rf 스파터링방법으로 에피택시성장시킨 후 기판의 온도가 박막의 결정학적, 자기적 특성에 미치는 영향을 토크마그네토미터, VSM 그리고 pole figure 등으로 주사하였다. X-선 회절 실험에서 기판온도가 증가할수록 (002)회절선의 회절강도가 증가하였다. 그러나 면간거리 d(002)은 25$0^{\circ}C$까지는 감소하였으나 30$0^{\circ}C$에서는 증가하였다. 회절강도의 증가와 면간거리의 감소는 순철박막과 기판과의 격자정합의 향상에 기인하는 것으로 생각되었으며 따라서 기판온도가 높을수록 좋은 에티택시박막을 얻을 수 있었다. 25$0^{\circ}C$에서 성장한 두께 1100$\AA$의 순철박막의 결정이방성상수 K1은 4.6$\times$105erg/cc로 벌크 단결정순철과 유사한 값을 가지고 있었다.

  • PDF

Study on hydrodynamic performance of Heavier-than-water AUV with overlapping grid method

  • Li, Xiang;Zhao, Min;Zhao, Faming;Yuan, Qingqing;Ge, Tong
    • Ocean Systems Engineering
    • /
    • 제4권1호
    • /
    • pp.1-19
    • /
    • 2014
  • Hydrodynamic coefficients strongly affect the dynamic performance of autonomous underwater vehicles (AUVs). A novel kind of underwater vehicle (Heavier-than-water AUV) with higher density than water is presented, which is different from conventional ones. RANS method and overlapping grids are used to simulate the flow field around the vehicle. Lifts, drags and moments of different attack and drift angles in steady state are calculated. The hydrodynamic performances and how the forces change with the attitude are analyzed according to the flow field structure. The steady-state results using overlapping grid method are compared with those of software FLUENT and wind tunnel tests. The calculation results show that the overlapping grid method can well simulate the viscous flow field around the underwater vehicle. Overlapping grid skills have also been used to figure out the planar-motion-mechanism (PMM) problem of Heavier-than-water AUV and forecast its hydrodynamic performance, verifying its effectiveness in dealing with the dynamic problems, which would be quite helpful for design and control of Heavier-than-water AUV and other underwater vehicles.

전기자동차용 3kW급 LDC를 위한 통합형 플라나변압기 설계 (Integrated Planar Transformer Design of 3 kW LDC for Electric Vehicles)

  • 라마단;석채영;김상진;최세완;유병우;박상훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2020년도 전력전자학술대회
    • /
    • pp.157-159
    • /
    • 2020
  • This paper presents an optimal planar transformer design of a 3-kW Low voltage DC-DC Converter (LDC) with 3.68 kW/L power density for electric vehicle (xEV) application. The transformer is optimized based on the trade-off between footprint and loss using the proposed figure-of-merit (FOM) based optimization. In order to achieve ZVS under entire load range, an external leakage inductance is added and implemented using the proposed magnetic integration technique. A comparison between non-integrated and integrated magnetic core using finite element analysis (FEA) is presented. The result shows that the integrated core can reduce the core loss up to 35 % and core boxed volume up to 15 % compared to the non-integrated core. Experimental results are also provided to validate the proposed magnetic integration technique.

  • PDF

실시간으로 적응빔형성 및 신호처리를 수행하는 평면능동위상배열 레이더 시스템 개발 (Development of the Planar Active Phased Array Radar System with Real-time Adaptive Beamforming and Signal Processing)

  • 김관성;이민준;정창식;염동진
    • 한국군사과학기술학회지
    • /
    • 제15권6호
    • /
    • pp.812-819
    • /
    • 2012
  • Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

Combined BOLD fMRI and Transcranial Magnetic Stimulation Study: Evaluation of Ipsilateral Motor Pathway of Stroke Patients

  • 배성진;장용민;장성호;변우목;강덕식
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
    • /
    • pp.104-104
    • /
    • 2001
  • Purpose: In this study, we investigated the possible motor pathways of hemiplegic stroke patients usin combined TMS and BOLD fMRI approach and evaluated the correlation between TMS a fMRI methods. Method: Four subjects, who demonstrated left hemiplegia after stroke, are included. TMS was performed using a Dantec Mag2 stimulator (Dantec Company, USA) in single puls mode with figure eight-shaped coil. Following TMS localization, The BOLD T2*-weight images were acquired with echo planar imaging sequence (TR = 1.2 sec, TE = 60 msec, and flip angle = 90). Motor activation was studied by means of a repetitive fing flexion-extension task. The stimulation protocol comprised 10 cycles of alternating activati and rest (10 images per cycle). Total 60 cycles were performed and each cycle take abou 1.5 sec. The resulting images were then analyzed with STIMULATE (CMRR, U, o Minnesota) to generate functional maps using a student t-test (p < 0.0005) and cluste analysis.

  • PDF