• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5998-6016
• /
• 2017

In thin-film transistor liquid-crystal displays (TFT-LCDs), which are most commonly used in mobile devices, the backlight accounts for about 70% of the power consumption. Therefore, most low-power-related studies focus on realizing power savings through backlight dimming. Image compensation is performed to mitigate the visual distortion caused by the backlight dimming. Therefore, popular techniques include pixel compensation for brightness recovery and contrast enhancement, such as histogram equalization. However, existing pixel compensation techniques often have limitations with respect to blur owing to the pixel saturation phenomenon, or because contrast enhancement cannot adequately satisfy the human visual system (HVS). To overcome these, in this study, we propose a novel dimming technique to achieve both power saving and HVS-awareness by combining the pixel compensation and histogram specifications, which convert the original cumulative density function (CDF) by designing and using the desired CDF of an image. Because the process of obtaining the desired CDF is customized to consider image characteristics, histogram specification is found to achieve better HVS-awareness than histogram equalization. For the experiments, we employ the LIVE image database, and we use the structural similarity (SSIM) index to measure the degree of visual satisfaction. The experimental results show that the proposed technique achieves up to 15.9% increase in the SSIM index compared with existing dimming techniques that use pixel compensation and histogram equalization in the case of the same low-power ratio. Further, the results indicate that it achieves improved HVS-awareness and increased power saving concurrently compared with previous techniques.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.34-41
• /
• 2010

We proposed the new pixel compensation circuit with high aperture ratio and the driving method for the large-area, low-power AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but good mobility and stability. To lower the error rate of the pixel circuit and to improve the aperture ratio for bottom emission method, we simplified the pixel compensation circuit. Because the proposed pixel compensation circuit with high aperture ratio has very low contrast ratio for conventional driving methods, we proposed the new driving method and circuit for high contrast ratio. Black data insertion was introduced to improve the characteristics for moving images. The pixel circuit was designed for 19.6" WXGA bottom-emission AMOLED panel, and the average aperture ratio of the pixel circuit is improved from 33.0% to 41.9%. For the TFT's $V_{TH}$ variation of ${\pm}0.2\;V$, the non-uniformity and contrast ratio of the designed panel was estimated under 6% and over 100000:1 respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.141-145
• /
• 2021

The brightness of the Organic Light Emitting Diode (OLED) display is controlled by thin-film transistors (TFTs). Regardless of the materials and the structures of TFTs, an OLED suffers from the instable threshold voltage (V_th) of a TFT during operation. When designing an OLED pixel with circuit simulation tool such as SPICE, a designer needs to take V_th shift into account to improve the reliability of the circuit and various compensation methods have been proposed. In this paper, the effect of the compensation circuits from two typical OLED pixel circuits proposed in the literature are studied by the transient simulation with a SPICE tool in which the stretched-exponential time dependent V_th shift function is implemented. The simulation results show that the compensation circuits improve the reliability at the beginning of each frame, but V_th shifts from all TFTs in a pixel need to be considered to improve long-time reliability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.560-562
• /
• 2002

The liquid crystal(LC) pixel capacitance Clc, which varies as a function of applied pixel voltage, is a main factor of pixel voltage errors on input gamma voltage, and therefore of the electro-optics(E-O) characteristics of LC pixel for a-Si TFT LCDs. The pixel voltage error(${\Delta}$Vp) for input gamma voltage was simulated for 14.1 inch diagonal XGA panel. An agreement between the experimental results and simulation was satisfactory for the gamma voltage compensation, ${\Delta}$Vp of the input gamma voltage. The proposed compensation method was successfully introduced to a 14.1 inch diagonal XGA panel, and a remarkable improvement of image sticking was achived.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.45-52
• /
• 2009

We proposed a new pixel circuit and driving method for the large-area, high-luminance AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but stable characteristic. To improve the uniformity of an image, the threshold voltage($V_{TH}$) and the mobility of the TFTs can be compensated together. The proposed method overcomes the previous methods for mobility compensation, and that is profitable for large-area applications. Black data insertion was introduced to improve the characteristics for moving images. AMOLED panel can operate in two compensation mode, so the luminance degradation by mobility compensation can be released. The scan driver for controlling the pixel circuits were optimized, and the compensation mode can be controlled simply by that. Final driving signal has large timing margin, and the panel operates stably. The pixel circuit was designed for 14.1" WXGA top-emission ANGLED panel. The non-uniformity of the designed panel was estimated under 5% for the mobility compensation time of 1us.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.422-428
• /
• 2015

This paper proposes a high performance reversible watermarking (RW) scheme based on a novel compensation strategy. RW embeds data into a host image by modifying its pixel values slightly. It is found that certain modified pixels can be compensated to their original values during the proposed embedding procedure. The compensation effect in the RW scheme can improve the marked image quality significantly. By incorporating the pixel selection method, a higher quality image is obtained, which is verified by extensive experiments.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.38-48
• /
• 2011

Block based LCD backlight nonideality and crosstalk compensation methodologies are proposed based on the analysis of backlight profiles and image pixel homogeneity. Large computation complexity required in the conventional compensations is minimized without the degradation of image qualities by optimizing image block size, image area inside the block to be excluded from the compensation computation and the required backlight range to be computed. The optimization results of computation complexity as well as image qualities are verified for the proposed compensation by real image data simulations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1697-1700
• /
• 2006

A Novel pixel structure with a new threshold voltage compensation technique is proposed for large-size a-Si:H AMOLED panel application. The proposed pixel improves image quality with threshold voltage compensation and alleviates annealing technique for display-off time. Sensing the threshold voltage of driving TFT for 20-inch WUXGA panel is verified by the HSPICE simulation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.466-469
• /
• 2009

The life time of AMOLED displays has been dependent on OLED materials up to this point. In particular, image sticking (burn-in) has been one of the most critical issues for AMOLEDs. This paper proposes image sticking compensation AMOLED pixel circuits to address the problem without requiring process or material improvements to the OLED itself. We verified the performance of those circuits by simulation and actual panel implementation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.594-600
• /
• 2014

A threshold voltage compensation pixel circuit was developed for active-matrix organic light emitting diodes (AMOLEDs) using amorphous indium-gallium-zinc-oxide thin-film transistors (a-IGZO-TFTs). Oxide TFTs are n-channel TFTs; therefore, we developed a circuit for the n-channel TFT characteristics. The proposed pixel circuit was verified and proved by circuit analysis and circuit simulations. The proposed circuit was able to compensate for the threshold voltage variations of the drive TFT in AMOLEDs. The error rate of the OLED current for a threshold voltage change of 3 V was as low as 1.5%.