• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.535-540
• /
• 2015

The location of the pivot between the backrest and seat pan of a reclining chair should be identical to the hip joint center to prevent unpleasant user experiences during tilting motion. However, mechanical friction occurs in the pin-in-slot joints that are installed under the seat pan as an alternative to the hinge joint. This reduces the reaction force between the backrest and the occupant's back when reclining and returning to an upright position, which causes the occupant's discomfort. In this study, bearings, rollers, and sliders were suggested as alternatives for the pin component, and the percentage of the reaction force on the backrest was measured while reclining the backrest and subsequently returning it to an upright position. The results show when bearings, rollers, and sliders were used for the pin-in-slot joint, the percentages of the reaction force were $59.7{\pm}10.3$, $47.2{\pm}13.6$, and $30.3{\pm}18.1$, respectively, indicating that the friction of the bearing was the lowest among the three pin components. Because the three alternatives have different manufacturing costs, synthetic judgment requires the consideration of not only mechanical friction but also user experience.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.535-542
• /
• 2000

The purpose of this study was to find the characteristics of the frontal natural head position(NHP) of patients with facial asymmetry, and to contribute to the diagnosis of facial asymmetry in the clinical examination of orthodontic patients. Twenty adult patients who had apparent facial asymmetry and no severe sagittal skeletal discrepancy were selected as the asymmetry group, and 21 young adults who had symmetric faces were selected as the symmetry group. Frontal cephalograms were obtained in the state of NHP using a pivot-mounted fluid level device. The degree of the menton deviation was defined as the angle between the line drawn through crista galli and anterior nasal spine and the line drawn through crista galli and menton. The following angles were measured and each of them was compared with the degree of the menton deviation one is the angle between the true vertical line and the supra-orbital line which is a tangent line to the extreme cranial point on the supra-orbital margin, and the other is the angle between the true vertical line and the cervical line drawn through the midpoint of atlas and the 4th cervical vertebra. Through the statistical analysis, following results were obtained. 1. The angle between the supra-orbital line and the true vertical line was much mote deviated from the right angle in the asymmetry group than in the symmetry group. 2. The angle between the cervical line and the true vertical line in the asymmetry group showed greater tendency than in the symmetry group, but the difference was not statistically significant. 3. In the asymmetry group, the degree of the menton deviation was positively correlated with the angle between the supraorbital line and the true vertical line. The above results suggest that racial asymmetry patients show the tendency to have the tilted NHP to compensate the deviation of menton position.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.89-95
• /
• 2010

This is the third series of article on dental occlusion and relationship to TMD and systemic symptoms. In this part of the series, it will overview the theory, treatment methods, criteria, their limitation of Chirodontics, Dental Distress Syndrome (DDS) and quadrant theorem(QT). Chirodontics has its root on Chiropractic and to maintain the 'healthy status' of TMJ with stable occlusion via dental treatment. Dental distress syndrome on the other hand believes that all the TMD has originated from reduced or collapse of posterior support and incorrect posterior vertical support had caused imbalance of the head and neck structure which eventually affect the whole body symptoms. The analysis and treatment is planned using quadrant theorem where the position of head, rotatory pivot point and occlusal plane is analyzed.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.3
• /
• pp.1-11
• /
• 2009

Heliostat sun tracking accuracy could be the most important requirement in solar thermal power plant, since it determines the overall efficiency of power plant. This study presents the effect of geometrical errors on the heliostat sun tracking performance. The geometrical errors considered here are the mirror canting error, encoder reference error, heliostat position error. pivot offset and tilt error, gear backlash and mass unbalanced effect error. We first investigate the effect of each individual geometrical error on the sun tracking accuracy. Then, the sun tracking error caused by the combination of individual geometrical error is computed and analyzed. The results obtained using the solar ray tracing technique shows that the sun tracking error due to the geometrical error is varying almost randomly. It also shows that the mirror canting error is the most significant error source, while the encoder reference error and gear backlash are second and the third dominant source of errors.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2008

Purpose: To evaluate the effectiveness of MRI after ACL reconstruction with femoral tunnel at 10 o'clock position. Materials and Methods: MRI findings of 29 patients after ACL reconstruction using hamstring tendon autograft were evaluated. The mean period from operation to MRI was 18.9 months($7{\sim}40$ months). Signal intensity, morphology and continuity of graft, femoral insertion, graft angle, roof impingement, cross pin breakage and position were evaluated. Those findings were compared with KT-2000, Lysholm knee score and pivot shift test. Results: There was no significant correlation between signal intensity of graft and the duration to MRI. Most common pattern of the morphology was straight, and the continuity was well-preserved. 13 cases of femoral tunnel insertion were zone 4 and 16 were zone 3. There were no roof impingement. 10 cases showed cross pin breakages, of which 5 were found at the outside of distal femoral posterior cortex. 9 showed cross pin directed posteriorly in axial view. There was no significant correlation between clinical results and cross pin breakage. Conclusion: MRI examinations after ACL reconstructions are useful to evaluate the graft status, position of the graft and cross pins. Since the direction of the cross pin is important especially in 10 o'clock femoral position, care should be taken to avoid cross pin breakage.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.1
• /
• pp.25-31
• /
• 2000

Introduction : This study compared the clinical results with biceps rerouting fer the isolated posterolateral instability (PLI) and for the PLI combined with PCL injuries. Methods : 21 cases of isolated PLI (group I) and 25 cases of PLI combined with PCL rupture were included in the study. The PLI was reconstructed by modified biceps femoris rerouting technique with PCL reconstructions performed prior to the PLI correction in cases of combined injury The clinical results were reviewed and analyzed. Results : Pre-operatively positive reverse pivot shift test turned negative in 43 cases post-operatively. Increased preoperative external rotation thigh foot angle (ERTFA) showed significant differences between the two groups and all fell within normal limits post-operatively At a mean follow-up of 40.3 months, the average Lysholm knee score and. The Hospital for Special Surgery Knee Ligament Score for group I and group II revealed above 90 points without statistically significant difference between the groups. 3 cases of tenodesis failure developed and re-operation was performed. Discussion and Conclusion : The advantages of modified Clancy technique include reduced surgical damages to the iliotibial band and fixation of the biceps tendon at the isometric position. The modified biceps rerouting technique is recommended for the reconstruction of both isolated and combined PLI except in patients with severe damages at the attachment of biceps tendon.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.206-214
• /
• 2003

Purpose : To analysis each clinical results after arthroscopic ACL reconstruction with using variable fixatives which are metallic and bioabsorbable interference screw, and RIGIDfix. Therefore, We reported the clinical reliability and safty of ACL reconstruction using RIGIDfix. Materials and Methods : We evaluated the results of arthroscopic ACL resconstruction with patellar tendon autograft among three groups, of which group 1 is used metal interference screw for 44 patients, group 2 used bioabsorbable interference screw for 47 patients, group 3 used RIGIDfix for 42 patients. We compared the clinical results by physical examination (anterior drawer test, Lachman test and pivot shift test), Lysholm score and KT-2000 arthrometer and compared the radiological results by measurement of tunnel and fixatives position and widening and by MRI findings. We analyzed the results by SAS 8.2 Ducan. Tukey and paired t-test Results : Physical instability was in 5 cases, which group 2 had 4 cases and group 3 had 1 case. Lysholm score improved from 59.8. 64.4, 61 to 90.1, 92.3. 92. KT-2000 arthrometer instability improved from 9.20, 10.2, 9.5 to 1.43. 1.62. 2.00 (p=0.478). Radiologically, all cases had excellent tunnel position and cyst change was observed the 8 cases in the group 2, but, all 20 cases 2nd MRI had signal change of peri-fixatives. But, no correlation of clinical results. Conclusion : No statistical difference of clinical instability was found among three groups. And femoral tunnel changes were much observed in group I, II than III. We considered the RIGIDfix has much advantages because the short operation time, better fixation position and much bone contact surface. But, further long term follow up study was needed.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2001

This study is to reconsider the symbolic potential of the costume by investigating the role of cloth in Indian culture, noting the fact that Indians wore hand-woven cloth and adopted a flag with the spinning wheel in the center as part of their nationalistic programs for independence. The results are as follows; The Indian cotton industry had held the fist position in the world and spinning and weaving had been an Indian national industry until the early part of the 19th century. As for the Indian cotton industry under the rule of Britain, Indian was reduced to being a colony producing raw materials and a market of cheap British finished goods, and eventually fell into anarchy with economic poverty of the general public and peasants'uprising mixed with the complaint of the intellectuals. The Indian National Movement started as a resort to escape the British rule because of continuous poverty and social exhaustion, and its pivot was Gandhi. Gandhi launched a revolutionary noncooperation movement in Indian society with diverse races, religions and castes, and developed nation-wide campaigns such as Boycott, Swadeshi, the encouragement of spinning wheels, etc. Gandhi urged that Indians' weak identity and poverty were caused by the dissolution of their native craft and that the Indians should wear Indian products for economic independence. Accordingly, leaders of Indian National Congress regarded a spinning wheel as an economic necessity and national symbol, and approved manual spinning and weaving as part of their nationalistic programs in order to drew the general public to the nationalistic movement in 1920. They also decided that all Congressmen should wear hand-woven cloth, Khadi, and adopted spinning wheels as the logo type of Indian National Congress. Khadi, Indian national cloth, was a symbol of national unification, freedom and equality, and also a means of economic self-sufficiency, Swadeshi, and eventually led India to autonomy, Swaraji. Therefore, it can be concluded that the cloth converted Indias economic and political identity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.267-276
• /
• 2001

On the basis of structural analysis of the radial gate(that is, Tainter gate), this paper focuses on the optimization of the moment distribution according to the location of the arm of the radial gate. In spite of its importance from economical view point, we could hardly find the study on the optimum design of radial gate. Accordingly, the present study identifies the optimum section modulus for a radial arm along with the optimum position for 2 of 3 radial arms with a convex cylindrical skin plate relative to a given radius of the skin plate curvature, pivot point, water depth, ice pressure, etc. These optimum measurements are then compared with previously constructed radial gates. The results indicate that the optimum section modulus vague for a radial arm was appreciably smaller than the previously constructed examples.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.2
• /
• pp.112-117
• /
• 2008

Purpose: Double-bundle reconstruction of anterior cruciate ligament(ACL) has the advantage of restoring the isometry and original function of ACL. The purpose of this study is to evaluate the clinical results following double-bundle reconstruction of ACL using autogenous hamstring grafts through an accessory anteromedial portal. Materials and Methods: From January 2005 to July 2006, sixty patients(52 males, 8 females) underwent double-bundle ACL reconstruction using autogenous hamstring tendons..The mean age was 31.7 years($20{\sim}51$ years). The mean follow up period was 13.4 months($12{\sim}16$ months). We made a horizontal-oblique skin incision just medial to tibial tuberosity and harvested semitendinosus and gracilis tendon. Tibial tunnel for posterolateral bundle was made near its anatomical position. By modifying an anatomic reconstruction of ACL by Yasuda et al., we made a femoral tunnel for posterolateral bundle through accessory anteromedial portal. Tunnels for anteromedial bundle were made with conventional method. We reconstructed anteromedial bundle with semitendinosus tendon and posterolateral bundle with gracilis tendon. Clinical results at last follow up were evaluated by range of motion, extent of anterior displacement(KT-1000 arthrometer), pivot-shift test. Functional evaluation of clinical outcomes were evaluated by Lysholm score and modified Feagin Scoring System. Results: There was no limitation of motion of knee joint at last follow up. Mean side to side difference of anterior displacement of tibia by KT-1000 arthrometer was improved from 8.4 mm preoperatively to 1.7 mm postoperatively(p<0.05). Average Lysholm score was improved from 64.1 preoperatively to 92.2 postoperatively(p<0.05). In modified Feagin Scoring System, 90% of cases were rated as good or excellent. Conclusion: Double-bundle reconstruction of ACL using autogenous hamstring grafts through accessory anteromedial portal results in good clinical outcomes.