• 신재생에너지
• /
• 제7권2호
• /
• pp.59-69
• /
• 2011

5MW wind turbine is regarded as a promising system for offshore wind farms in the western sea of Korean. And the wind turbine is developed in many companies but not much information is known about it. In this study, aerodynamics and control characteristics depending on several control methods is reviewed on 5MW wind turbine, in which configuration data of the turbine are used from the previous study of NREL. For the calculations, GH_Bladed, which is certificated software by GL, is used and compared with data from FAST code of NREL. This study shows that how much power production, and aerodynamic performances and loads can be obtained with different controls in the operation of 5MW wind turbine, which is expected to be useful in the design of the wind turbine system.

• 신재생에너지
• /
• 제7권4호
• /
• pp.58-65
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.499-505
• /
• 2001

In order to classify the mechanical phenomena of thermal elasto-plastic behavior on the multi-spot welded joints, this study has tried to carry out three-dimensional thermal elasto-plastic analysis on them. However, because the shape of multi-spot welded joints is not taxi-symmetric, unlike the cafe of single-spot welded joint, the solution domain for simulation should be three dimension. Therefore, in this paper, firstly, the three-dimensional thermal elasto-plastic program is developed by an iso-parametric finite element method. Secondly, from the results analyzed by developed program, this has clarified mechanical characteristics and their production mechanism on single and multi-spot waled joints. Moreover, it has been intended to make clear effects of pitch length on welding residual stresses, plastic strain of multi-spot welded joints.

• 음성과학
• /
• 제9권4호
• /
• pp.215-234
• /
• 2002

This study is designed for two purposes. The first one is to compare the realization and perception of English contrastive focus between Korean learners of English and native speakers of English. The second purpose is to study the phonological and phonetical features of contrastive focus by examining the results of production and perception experiments. English native speakers' results show that the English contrastive accents are generally accompanied by higher peak heights. The findings agree with the results of Bartels & Kingston (1994). Unlike native speakers of English, Korean speakers seem to be poor at relating the phonetical features of contrastive focus to their actual speech. Korean speakers' results are especially unsuccessful when the contrast is not distinctly grasped through syntactic structure, or when the function words are contrasted. Furthermore, Korean speakers' utterances tend to have pitch accents on every content word, whether the word is contrasted or not.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.36.2-36.2
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.

• 음성과학
• /
• 제8권1호
• /
• pp.7-19
• /
• 2001

The acoustic parameters of nine Korean numbers were analyzed by Praat, a speech analysis software, and synthesized by SenSynPPC, a Klatt formant synthesizer. The overall intensity, pitch and formant values of the numbers were modified dynamically by a step of 1 dB, 1 Hz and 2.5% respectively. The study explored the sensitivity of listeners to changes in the three acoustic parameters. Twelve subjects (male and female) listened to 390 pairs of synthesized numbers and judged whether the given pair sounded the same or different. Results showed that subjects perceived the same sound quality within the range of 6.6 dB of intensity variation, 10.5 Hz of pitch variation and 5.9% of the first three formant variations. The male and female groups showed almost the same perceptual ranges. Also, an asymmetrical structure of high and low boundary was observed. The ranges may be applicable to the development of a speaker identification system while the method of synthesis modification may apply to its evaluation data.

• 음성과학
• /
• 제12권4호
• /
• pp.153-166
• /
• 2005

This paper attempts to examine the accent implementation and perception of noun phrases and compound nouns in English sentences, arguing that primary stress of noun phrase and compound noun is realized in relative prominence in intonation. The production test examines how the stress patterns of the noun phrases and compound nouns are realized in intonation of the English native speakers' utterances. The perception test investigates English and Korean listeners' comprehension of the intonation of the noun phrases and compound nouns. And the results of this experimental study show that speakers and listeners produce and perceive the primary stress as a relatively prominent accent even if in contrast of English listeners, Korean learners have difficulty in using the cue of pitch accent location and figuring out compound nouns and noun phrases.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 5월 학술대회지
• /
• pp.43-47
• /
• 2003

This paper is phonetic study of $F_{0}$ range and boundary tone in Mandarin Chinese. The production data from 6 Chinese speakers show that there are declination, pitch resetting and tonal variation of boundary tone. In declarative sentence, $F_{0}$ declines gradually over the utterance but mid-sentence boundary prevents $F_{0}$ of following syllable from declining because of pitch resetting. $F_{0}$ range of syllable is expanded before the mid- and final sentence boundaries. In interrogative one, $F_{0}$ ascends gradually over the utterance and mid-sentence boundary makes $F_{0}$ of following syllable rise more. $F_{0}$ range of sentence final syllable is expanded and $F_{0}$ contour shows rising curve.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.521-530
• /
• 2011

구조용 집성재의 시장 수요가 확대되고 다양화되면서 교량이나 파고라와 같이 외기에 노출되는 조건에서 사용하기 위한 고 내구성 구조용 집성재에 대한 시장 요구가 증가할 것으로 예견된다. 따라서 본 연구는 국산 침엽수재로 제조되는 구조용 집성재에 적합한 방부처리 기술 및 기준을 개발하기 위한 목적으로 진행되었다. 본 연구에서는 방부처리된 국산 리기다소나무 제재목을 이용하여 구조용 집성재를 제조하고 제조 단계별 생산수율과 KS 품질기준 충족여부를 평가하였다. 방부집성재의 제조수율은 일반 집성재와 큰 차이를 나타내지 않았으며, 목재자원의 효율적인 활용을 위해서는 집성재 제조수율 향상방안과 함께 부산물에 대한 효율적 활용방안도 함께 검토되어야 한다. 리기다소나무 방부처리재의 경우 불균일한 방부약제 흡수량으로 인하여 구조용 집성재 제조용으로 적합하지 않은 것으로 확인되었으며, 집성재 제조 후에 유용성 방부제를 처리하는 방안에 대한 추가적인 검토가 요구되었다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권2호
• /
• pp.105-121
• /
• 2017

Purpose It is a major goal to improve the product yields during production operations in the manufacturing industry. Therefore, factory is trying to keep the good quality materials and proper production resources, also find the proper condition of facilities and manufacturing environment for yields improvement. Design/methodology/approach We propose the hybrid framework to analyze to dataset extracted from MES. Those data is about the alarm information generated from equipment, both measurement and equipment process value from production and cycle/pitch time measured from production data these covered products during production. We adapt a data warehousing techniques for organizing dataset, a logistic regression for finding out the significant factors, and a association analysis for drawing the rules which affect the product yields. And then we validate the framework by applying the real data generated from the discrete process in secondary cell battery manufacturing. Findings This paper deals with challenges to apply the full potential of modeling and simulation within CPPS(Cyber-Physical Production System) and Smart Factory implementation. The framework is being applied in one of the most advanced and complex industrial sectors like semiconductor, display, and automotive industry.