• Journal of the Korean Solar Energy Society
• /
• v.35 no.3
• /
• pp.9-16
• /
• 2015

In order to support various studies for assessment of onshore and offshore wind turbine system including foundations, the land-based version of 2MW PMSG direct drive wind turbine has been analyzed using HAWC2 that account for the coupled dynamics of the wind inflow, elasticity, and controls of the turbine. this work presents the steady-state response of the system and natural frequency of the first thirteen structure turbine modes as a function of wind speed. Rotor, generator speeds, pitch angle, power production, thrust force, deflections of tower and blade are compared for one case below and one case above the rated wind speed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.109-113
• /
• 2000

The piercing and blanking of thin sheet metal working with a pilot punch guide is specified division in press die design and making. In order to prevent the detects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and its phenomena, die structure, machine tool working for die making, die materials and its heat treatment, metal working in industrial and its know how etc. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. This study regards to the aim of small quantity of production part's press working by piloting for accurate guide of actual sheet metal strip. Part 1 of this study reveals with production part and strip process layout for the die design.

• Phonetics and Speech Sciences
• /
• v.7 no.3
• /
• pp.89-97
• /
• 2015

The aim of this study is to investigate the prosodic aspects of structural ambiguous sentences in Korean produced by Japanese Korean learners and the influence of their first language prosody. Previous studies reported that structural ambiguous sentences in Korean are different especially in prosodic phrasing. So we examined whether Japanese Korean leaners can also distinguish, in production, between two types of structural ambiguous sentences on the basis of prosodic features. For this purpose 4 Korean native speakers and 8 Japanese Korean learners participated in the production test. Analysis materials are 6 sentences where a relative clause modify either NP1 or NP1+NP2. The results show that Korean native speakers produced ambiguous sentences by different prosodic structure depending on their semantic and syntactic structure (left branching or right branching sentence). Japanese speakers also show distinct prosodic structure for two types of ambiguous sentences in most cases, but they have more errors in producing left branching sentences than right branching sentences. In addition to that, interference of Japanese pitch accent in the production of Korean ambiguous sentences was observed.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.235-242
• /
• 2010

Differently from instruments which synthesized sounds and tones in the past, voice synthesis engine for music production has reached to the level of creating music as if actual artists were singing. It uses the samples of human voices naturally connected to the different levels of phoneme within the frequency range. Voice synthesis engine is not simply limited to the music production but it is changing cultural paradigm through the second creations of new music type including character music concerts, media productions, albums, and mobile services. Currently, voice synthesis engine technology makes it possible that users input pitch, lyrics, and musical expression parameters through the score editor and they mix and connect voice samples brought from the database to sing. New music types derived from such a development of computer music has sparked a big impact culturally. Accordingly, this paper attempts to examine the specific case studies and the synthesis technologies for users to understand the voice synthesis engine more easily, and it will contribute to their variety of music production.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.401-411
• /
• 1989

The embryos of Pinus taeda, P. rigida, and P. taeda ${\times}$ rigida were cultured for adventitious shoot regeneration in vitro. Culture media were modified from Gresshoff and Doy (MGD), Murashige and Skoog (MMS), Lloyd and McCown (MLM), and Schenk and Hildebrandt (MSH). NAA was added to initiation media at a concentration of 0.1 or 0.01 mg/l. BAP was used at the concentrations of 0.1. 0.5, 1, 2, or 5mg/l. Each explant was induced for 3-4 weeks on solid medium. All explants were cultured up to 16 weeks. Illumination was about $1506{\pm}540lux$ at the level of the tissues in the growth room with a temperature of $25{\pm}2^{\circ}C$. A 16-hour photoperiod per 24 hours was used. Half-strength medium was used for all the subcultures. For shoot production by loblolly pine, MMS, MLM, or MSH is preferred with 5 mg/l BAP with either 0.1 or 0.01 mg/l NAA. For shoot production by pitch pine, MMS, MLM, or MSH is recommended with 2 or 5 mg/l BAP with 0.1 mg/l NAA. For shoot production by the hybrid pine, MMS or MLM is more effective with 1, 2 or 5 mg/l BAP with 0.1 mg/l NAA. There were no differences recognized among the species tried in the patterns of bud formation and shoot development. Different composition of media, in major and minor salts or possibly in vitamins, should be tested for the two developmental stages of adventitious shoots ; the induction of shoot buds and the elongation of them into shoots.

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.185-193
• /
• 2013

This study investigates dialectal differences in the acoustic properties of Korean lenis, aspirated, and tense stops Seoul Korean (standard Korean) and Yanbian Korean (spoken in the largest Korean Autonomous Prefecture in China). This production study the main acoustic cues that each dialect uses to mark the laryngeal distinction between the three types of Korean stops. Measurements included VOT, and the initial F0 of the following vowel. Data collected from 10 young Seoul Korean speakers, 10 young Yanbian Korean speakers, and 6 older Yanbian speakers. two key findings: First, aspirated and lenis stops are mainly differentiated by F0 in Seoul Korean, and by $H1^*-H2^*$ in Yanbian Korean. Second, there is no VOT merger between lenis and aspirated stops in Yanbian Korean, whereas there is in Seoul Korean. These results are discussed in terms of the phenomenon of VOT shift and the function of F0t is argued that the function of F0 to substitute for VOT difference as a primary cue for the coding of laryngeal contrast can be predicted by the pitch accent system of the language involved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.125-130
• /
• 2017

In this study, the influence of various factors on surface roughness was investigated using the Taguchi experimental method through high-speed machining processing. Feed rate, pitch, tool diameter, and depth of cut are widely applied to high-speed machining conditions for mold production. Each of these factors was implemented and classified into three levels; then, after high speed machining, surface roughness was measured, the S/N ratio was analyzed, and the influence on the surface roughness of control factors was analyzed quantitatively by ANOVA. Using this information, a mathematical model for predicting surface roughness was derived from multiple regression analysis. This mathematical model enables the surface roughness value after high-speed machining to be predicted at the production stage, before machining, for a wide range of machining conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.457-457
• /
• 2000

The display module of PDP consists of a pair of fine electrode patterned panels. For example, in case of 42" PDP, thousands of electrode patterns should be placed on panel, where length, width, and height of each pattern m one meter, 50${\mu}{\textrm}{m}$, and 30${\mu}{\textrm}{m}$ respectively. And pitch between patterns is around 200${\mu}{\textrm}{m}$. Electrode patterns are frequently damaged during the production process, and thus might be broken. These breakage will result in open-circuited electrical characteristic of a pattern and/or open-circuited electrical characteristic between patterns. Therefore, inspection of pattern defects is the inevitable process to improve production yield rate of the panel. In this paper, we first review several types of PDP pattern defects which affects yield-rate of PDP. And, problems of inspecting such pattern defects by a typical inspection method is addressed. Then, a novel inspection method is proposed to overcome the difficulties, where some new components and the algorithm to detect the electrode defects are explored.ored.

• Journal of Korea Foresty Energy
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1982

To study tile comparison of aboveground biomass of Pinus rigida Mill. of 18-year-old, plantations located in Whaseong, Yuseong and Wanju district were selected. Ten sample trees in each district selected taking account of DBH distribution were felled carefully to minimize loss of branches and stem analysed by 1m lag segment sectioned from base . The tree height and DBH were measured for sample trees in total growing within $200m^2$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two variables, $DBH^2$ and tree height, combined term were presented. The standing crops in the sample stand was estimated to be as much as 23.88, 54.09 and 42.68 tons of dry matter, above ground , per ha in Whaseong, Yuseong anf Wanju district respectively. Annual net production was estimated at 253,657 and 3.65 tons per ha per year respectively. The net assimilation rate was 1.65,1.95 and 1.81 kg/kg/yr in Whaseong, Yuseong and Wanju district respectively. The efficency of leaf to produce stem was 0.99, 1.12 and 1.30 kg/kg/yr respectively.

• Phonetics and Speech Sciences
• /
• v.1 no.1
• /
• pp.99-107
• /
• 2009

In view of the hypothesis that the effects of Parkinson disease on voice production can be detected before pharmacological intervention, the voice differences of patients with Idiopathic Parkinson's disease and a healthy aging group were diagnostically analyzed with the long term object of establishing, for clinical purposes, early disease-progression biomarkers. Fifteen patients with Idopathic Parkinson's disease (prior to pharmacological intervention) and a healthy control group of 15 were selected and every voice was recorded three times using praat (ver. 5022) with a headset mic. Relevant parameters - acoustic measure of /a/ phonation, F0 related parameters, MPT related parameters, articulatory ratio, VOT - were then analyzed by MANOVA. Significant differences were found in the F0 related (low F0, high F0, F0 range) and MPT related parameters. There were also significant differences in acoustic measurements (intensity, shimmer, HNR, jitter), AMR (/$t{\Lambda}$/,/$k{\Lambda}$/) and VOT (/ta/), The findings indicated that the voice production of patients with Idiopathic Parkinson's disease have normal pitch but bad quality. In particular, with slow articulatory ratios and VOT values, the tongue tip functioning of patients was lower than for the healthy group.