• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.37-44
• /
• 2015

Conjugate heat analysis on a high pressure turbine stage including secondary flow paths has been carried out. The secondary flow paths were designed to be located in front of the nozzle and between the nozzle and rotor domains. Thermal boundary conditions such as empirical based temperature or heat transfer coefficient were specified at nozzle and rotor solid domains. To create heat transfer interface between the nozzle solid domain and the rotor fluid domain, frozen rotor with automatic pitch control was used assuming that there is little temperature variation along the circumferential direction at the nozzle solid and rotor fluid domain interface. The simulation results showed that secondary flow injected from the secondary flow path not only prevents main flow from penetrating into the secondary flow path, but also effectively cools down the nozzle and rotor surfaces. Also thermal barrier coating with different thickness was numerically implemented on the nozzle surface. The thermal barrier coating further reduces temperature gradient over the entire nozzle surface as well as the overall temperature level.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.19-28
• /
• 2010

The purpose of this study was to increase the current understanding of the acoustic characteristics of voices with advancing age. The relationship between age-related changes in body physiology and certain acoustic characteristics of voice was studied in a sample of 80 men representing four chronological age groupings (20-29, 50-59, 60-69, 70-79) who were all of good physical condition. Each subject was asked to phonate the vowel /a/, /i/, and /u/ for as long as possible at comfortable frequency and intensity level and read the sentence. A promising voice analysis program (Multi-Dimensional Voice $Program^{TM}$) was used to measure the fundamental frequency ($f_0$), jitter, shimmer, $f_0$ variation, peak-amplitude variation, smoothed pitch perturbation quotient, smoothed amplitude perturbation quotient, soft phonation index, $f_0$-tremor intensity index, amplitude tremor intensity index, and noise-to-harmonics ratio from the samples.

• 항공우주기술
• /
• 제12권1호
• /
• pp.189-199
• /
• 2013

본 논문에서는 나로호 3차 비행시험에서의 2단 자세제어 결과를 정리하였다. 나로호 2단 추력기시스템에 의한 무추력 비행구간 3축 자세제어 및 추력벡터제어에 의한 킥모터 연소구간 피치/요 자세제어가 정상적으로 수행되었음을 보였다. 무게중심 오프셋, 킥모터 슬래그 영향, 킥모터 잔류추력 영향으로 인한 외란에도 불구하고 2단 자세제어기가 모든 비행구간에서 성공적으로 작동하였음을 보였다. 이러한 결과들은 국내의 발사체 자세제어 기술을 향상시키는 데 있어서 중요한 토대를 마련할 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.271-275
• /
• 2006

This paper describes the design and realization of full attitude system based on MEMS IMU and GPS carrier phase. The work can be divided into two parts: First, initial heading is determined by using two GPS receivers. And this paper discusses the usage of space geometry conditions to reduce the range of ambiguity search. The method presented in this paper was tested on the static. On the static condition, an accuracy better than 0.06 degrees for heading for 3.48m long baseline has been achieved. Integration of GPS and low cost MEMS IMU are used to realize the real-time heading attitude system. Second, level attitude (pitch and roll) is determined using the method of frequency-velocity for the feedback control. At the same time, the method using the attitude based on MEMS IMU to help determination of the range of ambiguity search is proposed. The results done on the sea show that an alternative means to provide real-time, cost-effective, accurate and reliable attitude information for attitude surveys. Though motivated by a big ships application, the design can be applied to other vehicles.

• 한국지능시스템학회논문지
• /
• 제19권5호
• /
• pp.683-688
• /
• 2009

본 논문에서는 비젼을 이용한 영상처리 기술을 기반으로 비접촉식 미세 측정 광학기에 의해 측정된 이미지를 템플릿 매칭과 B-Spline 보간법에 의해 보다 빠르고, 정밀한 복원 기법을 제안한다. 이를 위해 먼저 각각의 이미지로부터 매칭 템플릿과 피 매칭 템플릿을 검출한다. 그런 다음 기준면으로부터 두 이미지의 중첩되는 부분의 롤, 피치, 요 오차를 보정하여 정합시킨다. 그리고 B-Spline 보간법에 의해 정합된 부분을 연속화한다. 마지막으로, 제안된 방법은 실험을 통해 그 응용 가능성을 증명한다.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.67-79
• /
• 2015

Acoustic emission analysis is an effective technique for monitoring the evolution of damage in a structure. An experimental analysis on a set of reinforced concrete beams under flexural loading was carried out. A mixed AE analysis method which used both parameter-based and signal-based techniques was presented to characterize and identify different failure mechanisms of damage, where the signal-based analysis was performed by using the Hilbert-Huang transform. The maximum instantaneous energy of typical damage events and the corresponding frequency characteristics were established, which provided a quantitative assessment of reinforced concrete beam using AE technique. In the bending tests, a "pitch-catch" system was mounted on a steel bar to assess bonding state of the steel bar in concrete. To better understand the AE behavior of bond-slip damage between steel bar and concrete, a special bond-slip test called pullout test was also performed. The results provided the basis of quantitative AE to identify both failure mechanisms and level of damages of civil engineering structures.

• Journal of Ship and Ocean Technology
• /
• 제7권4호
• /
• pp.16-31
• /
• 2003

The finite volume based multi-block RANS code, WAVIS developed at KRISO, is used to simulate the turbulent flows around a submarine with the realizable $\textsc{k}-\varepsilon$ turbulence model. RANS methods are verified and validated at the level of validation uncertainty 1.54% of the stagnation pressure coefficient for the solution of the turbulent flows around SUBOFF submarine model without appendages. Another SUBOFF configuration, axisymmetric body with four identical stem appendages, is also computed and validated with the experimental data of the nominal wake and hydrodynamic coefficients. The hydrodynamic forces and moments for SUBOFF model and a practical submarine are predicted at several drift and pitch angles. The computed results are in extremely good agreement with experimental data. Furthermore, it is noteworthy that all the computations at the present study were carried out in a PC and the CPU time required for 2.8 million grids was about 20 hours to get fully converged solution. The current study shows that CFD can be a very useful and cost effective tool for the prediction of the hydrodynamic performance of a submarine in the basic design stage.

• 센서학회지
• /
• 제27권6호
• /
• pp.380-385
• /
• 2018

Recently, interest in baseball has been increasing as the level of international baseball games, the popularity of domestic leagues, and the number of players entering the MLB has increased. In this paper, we propose a pitching system that can be applied to both professional and amateur baseball. The pitching system consists of a control module using MSB764T PLC, a pitching mechanism including AC motors and a ball feed rail, an HMI using the CHA-070WR model, inverter, etc. To pitch the breaking balls, the two AC motors each use an inverter to independently control the speed. The implemented pitching system was experimented on, investigating ball speed and ball movement according to RPM using the BUSHNELL Velocity Speed Gun. Experimental results on ball speed are similar to the theoretical data and the measured data. From the experimental data, it is confirmed that the damping coefficient value for the pitching ball is about 0.98. In the case of the breaking ball, the larger the difference between the speeds on the sides of the ball and the faster the ball speed, the larger the bending degree.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2018

As the performance and density of IC (integrated circuit) devices increase, power and signal integrities in the global interconnects of advanced packaging technologies are becoming more difficult. Thus, the global interconnect technologies should be designed to accommodate increased input/output (I/O) counts, improved power grid network integrity, reduced RC delay, and improved electrical crosstalk stability. This requirement resulted in the fine-pitch interconnects with a low-k dielectric in 3D packaging or wafer level packaging structure. This paper reviews an organic-inorganic hybrid material as a potential dielectric candidate for the global interconnects. An organic-inorganic hybrid material called polysiloxane can provide spin process without high temperature curing, an excellent dielectric constant, and good mechanical properties.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.49-54
• /
• 2023

최근 SIP (System in Packaging) 기술은 고주파(5G 이상) 통신 및 미세 피치 회로 특성을 만족해야 한다. 기존 ENIG (Electroless Ni/Immersion Au Plating) 표면처리는 전송 손실이 증가하여 고주파에 적합하지 않으므로, 니켈 도금층이 없어도 패턴 및 패드의 신뢰성 수준을 만족시킬 수 있는 표면 처리 기술이 검토되고 있다. 본 논문에서는 고주파 통신 대응을 위한 Ni-less 표면처리기술과 소재에 따른 주파수 특성 등에 대한 연구 동향을 조사하였다.