• 한국가구학회지
• /
• 제17권3호
• /
• pp.23-28
• /
• 2006

An experiment was conducted to investigate the pit structure of four kind of pine wood species grown in Korea. Torus diameter, margo width, margo lattice size, diameter of pit aperture and pit border width were taken under consideration for explaining the pit structure difference among Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi. Torus diameter was found highest in Pinus rigida and the lowest in Pinus densiflora. Margo lattice size varied with torus diameter. Wider torus lowered the margo lattice size. Highest margo width was found in Pinus rigida while the lowest one was found in Pinus koraiensis. Pit aperture diameter was found highest in Pinus densiflora and lowest in Pinus koraiensis. In Pinus rigida, pit border was found the highest and the lowest was found in Larix kaempferi. Pit aperture diameter and pit border were increased gradually from pith to bark while there was a decreasing trend in the margo lattice size measuring from the pith to bark.

• 한국가구학회지
• /
• 제17권4호
• /
• pp.101-107
• /
• 2006

To know the structural difference between the ray parenchyma and ray tracheid among Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi, an observation was carried out under the FE-SEM. The longest ray parenchyma and ray tracheid were found in Pinus koraiensis species while the shortest ray tracheid and ray parenchyma were found in Pinus densiflora and Larix kaempferi. Larix kaempferi had more than one endwall pit in its ray parenchyma. Pinus densiflora was found highest in the pit aperture diameter in ray tracheid and aperture diameter in the cross-field pit. The pit border width in ray tracheid and lumen diameter of ray parenchyma were found highest in Pinus rigida. The cell wall thickness of ray parenchyma and pit aperture diameter in endwall pit of ray tracheid were found highest in Pinus koraiensis compared to other species.

• 한국과학교육학회지
• /
• 제27권9호
• /
• pp.919-929
• /
• 2007

본 연구는 우리나라 대학의 식물형태학 분야에서 사용하는 유관속조직의 구조에 관한 용어들 가운데,교재 또는 저술자에 따라 다르게 번역되어 쓰이고 있는 한글 용어들의 합리적인 표기를 제안하기 위한 것이다. 대학에서 교재로 사용되는 일반생물학,일반식물학,식물형태학 등 14종의 교재에서 서로 다르게 표기되어 있는 대표적인 12개 용어의 어원과 정의를 조사 분석한 결과 제시된 한글 용어의 표기는 다음과 같다. 즉 목부(木部,물관부)의 구조에 관한 용어로서 "apotracheal parenchyma"는 "도관분리형유조직(導管分離形柔祖熾)" 으로 표기하고, "paratracheal parenchyma"는 "도관연접형유조직(導管連接形柔組織)"으로,"tylose"는 "전충체(塡充體)"로 표기하는 것이 적합하다. 벽공(壁孔)의 구조에 관한 용어로서 "simple pit"는 "단순벽공(單純壁孔)"으로 표기하고, "bordered pit"는 "유연벽공(有緣壁孔)"으로,"aspirated bordered pit"는 "흡착유연벽공(吸着有緣壁孔)"으로,"pit aperture"는 "벽공구(壁孔口)"로 표기하는 것이 합당하다. 그러고 중심주(中心柱)의 구조에 관한 용어로서 "haplostele"은 "단순중심주(單純中心柱)"로 표기하고, "actinosteIe"은 "방사중심주(放射中心柱)"로, "plectostele"은 "습곡중심주(褶曲中心柱)"로,"solenosteIe"은 "통로중심주(通路中心柱)"로 표기하는 것이 합리적이다. 이러한 연구를 통해서 식물학 분야를 가르치는 교수자와 배우는 학습자들 사이에 생물학적 개념을 올바르게 전달하고 이해를 증진시킬 수 있을 것으로 기대된다.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.54-61
• /
• 2010

This study was carried out to identify the differences of some macro and microanatomical features between Eunsasi poplar (Populus tomentiglandulosa T. Lee) and Konara oak (Quercus serrata Thunb.). Anatomical features such as vessel and fiber diameter, cross sectional area of ray parenchyma and endwall pit aperture diameter in ray parenchyma were compared. Differences of anatomical features between two species were found statistically significant. Earlywood vessel diameter in poplar and oak increased from pith to bark while it was found almost stable in latewood. Fiber diameter in poplar was higher than oak fiber. Ray area and the pit aperture diameter in endwall of ray parenchyma were found higher in oak than those in poplar.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.187-187
• /
• 2012

In this report, the plasmonic nanopores of less than 5 nm diameter were fabricated on the apex of the pyramidal cavity array. The metallic pyramidal pit cavity can also utilized as the plasmonic bioreactor, and the fabricated Au or Al metallic nanopore can provide the controllable translocation speed down using the plasmonic optical force. Initially, the SiO2 nanopore on the pyramidal pit cavity were fabricated using conventional microfabrication techniques. Then, the metallic thin film was sputter-deposited, followed by surface modification of the nanometer thick membrane using FESEM, TEM and EPMA. The huge electron intensity of FESEM with ~microsecond scan speed can provide the rapid solid phase surface transformation. However, the moderate electron beam intensity from the normal TEM without high speed scanning can only provide the liquid phase surface modification. After metal deposition, the 100 nm diameter aperture using FIB beam drilling was obtained in order to obtain the uniform nano-aperture. Then, the nanometer size aperture was reduced down to ~50 nm using electron beam surface modification using high speed scanning FESEM. The followed EPMA electron beam exposure without high speed scanning presents the reduction of the nanosize aperture down to 10 nm. During these processes, the widening or the shrinking of the nanometer pore was observed depending upon the electron beam intensity. Finally, using 200 keV TEM, the diameter of the nanopore was successively down from 10 nm down to 1.5 nm.

• 한국가구학회지
• /
• 제26권2호
• /
• pp.179-185
• /
• 2015

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood G. biloba, ring-porous wood A. altissima, and diffuse- porouswood D. kaki. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents (MC). The length, lumen diameter, pit diameter, end wall pit diameter and the numbers of end wall pits determined for the flow rate. The liquid flow in the those cells was captured via video and the capillary flow rate in the ones were measured. Vessel in hardwood species and tracheids in softwood was found to facilitate prime role in longitudinal penetration. Radial flow speed was found highest in ray parenchyma of G. biloba. Anatomical features like the length and diameter, end-wall pit numbers of ray parenchyma were found also responsible fluid flow differences. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Therefore, the average liquid penetration depth in longitudinal tracheids of G. biloba was found the highest among all cells considered in D. kaki and A. altissima.

• 한국가구학회지
• /
• 제29권1호
• /
• pp.1-7
• /
• 2018

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Metasequoia glyptostroboides, diffuse-porous wood Anthocephalus cadamba and ring-porouswood Fraxinus rhynchophylla. In radial direction, ray cells and in longitudinal direction, tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents (MC). The length, lumen diameter, pit diameter, end wall pit diameter and the numbers of end wall pits determined for the flow rate. The liquid flow in the those cells was captured via video and the capillary flow rate in the ones were measured. Vessel in hardwood species and tracheids in softwood was found to facilitate prime role in longitudinal penetration. Anatomical features like the length and diameter, end-wall pit numbers of ray parenchyma were found also responsible fluid flow differences. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Therefore, the average liquid penetration depth in longitudinal tracheids of Metasequoia glyptostroboides was found the highest among all cells considered in Anthocephalus cadamba and Fraxinus rhynchophylla In radial direction, ray parenchyma of Metasequoia glyptostroboides was found the highest depth and the one of Fraxinus rhynchophylla was the lowest. The solution was penetrated lowest depth in the wood fiber of Fraxinus rhynchophylla. The large vessel of Fraxinus rhynchophylla was found the lowest depth among the vessels. The solutin was penetrated to the wood fiber of Anthocephalus cadamba higher than the one of Fraxinus rhynchophylla.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.88-93
• /
• 2017

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Larix kaempferi (Lamb.)Carriere, diffuse-porous wood Betula davurica Pall.. and ring-porouswood Castanea crenata S.etZ. In radial direction, ray cells and in longitudinal direction, tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents (MC). The length, lumen diameter, pit diameter, end wall pit diameter and the numbers of end wall pits determined for the flow rate. The liquid flow in the those cells was captured via video and the capillary flow rate in the ones were measured. Vessel in hardwood species and tracheids in softwood was found to facilitate prime role in longitudinal penetration. Anatomical features like the length and diameter, end-wall pit numbers of ray parenchyma were found also responsible fluid flow differences. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Therefore, the average liquid penetration depth in longitudinal tracheids of Larix kaempferi was found the highest among all cells considered in Betula davurica and Castanea crenata, In radial direction, ray parenchyma of Larix kaempferi was found the highest depth and the one of Betula davurica was the lowest. The solution was penetrated lowest depth in the wood fiber of Castanea crenata. The large vessel of Castanea crenata was found the lowest depth among the vessels. The solutin was penetrated to the wood fiber of Betula davurica higher than the one of Castanea crenata.

• 대한원격탐사학회지
• /
• 제37권3호
• /
• pp.531-542
• /
• 2021

노천 채광을 수행하는 광산은 지표 변화와 환경 교란을 발생시킬 수 있기 때문에 지속적인 모니터링이 필요하다. 노천 광산은 채광 작업장에 식생이 거의 분포하지 않아 InSAR 긴밀도 영상을 이용한 모니터링이 가능하다. 본 연구는 최근 개발된 InSAR 긴밀도 영상 기반의 Normalized Difference Activity Index(NDAI)를 적용하여 광산에서 발생하는 활동을 분석하였다. 3월5일청년광산은 2008년 이후 본격적으로 개발이 확장된 북한의 광산이다. 3월5일청년광산을 촬영한 12일 간격의 Sentinel-1 SAR 영상을 이용하여 획득된 InSAR 긴밀도 영상으로 NDAI 분석을 진행하였다. 우선 2000년부터 약 14년간 발생한 75.24 m의 고도 하강 지역과 약 9.85 m의 고도 상승 지역을 채광 작업장 및 광미 적치장으로 정의하였다. 이후 NDAI 영상을 이용하여 기간별 활동 분석을 진행하기 위해 전체 기간의 평균 영상, 1년 단위의 평균 영상, 및 4개월 단위의 평균 영상을 제작하였다. 2017년부터 2019년까지 광산 활동은 평균적으로 채광 작업장의 중심에서 비교적 활발하였다. 보다 자세한 광산의 활동 변화를 확인하기 위해 시간 간격을 좁혀 1년간의 활동을 알아보고자 하였다. 2017년은 지진파 자료의 정보와 NDAI 영상을 이용하여 인공 지진의 발생 시점과 그 전후에 대하여 RGB 합성 영상을 제작하고 채광 작업장의 활동 변화를 분석하였다. 2017년 4월 30일 발생한 대규모 발파 이후 채광 작업장의 서쪽에서 활발한 활동이 감지되었다. 9월 30일의 두 차례의 발파 이후에는 채광 작업장의 크기가 확장된 것으로 추정된다. 2018년 및 2019년의 활동 변화는 4개월 단위의 시간 평균 영상을 RGB 영상으로 합성하여 분석하였다. 연도별 활동을 분석한 결과, 2018년은 채광 작업장의 북동쪽에서 활발하게 활동하는 영역을 찾을 수 있었으며, 2019년은 광미 적치장에서 확장에 따른 특징적인 활동이 확인되었다. NDAI를 이용한 시계열 분석으로 광학 영상으로는 확인하기 어려운 노천 광산의 무작위적인 지표 변화를 탐지할 수 있었다. 특히 현장 자료를 획득할 수 없는 지역의 광산 활동을 원격 탐사를 이용하여 효과적으로 수행할 수 있었다.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.1-5
• /
• 2008

Super-resolution near-field structure (super-RENS) technology and solid immersion lens (SIL) based near-field (NF) technology have been expected as promising approaches to increase data capacity or areal density of optical disc. Super-RENS technology has been studied until now using mainly numerical aperture (NA) of 0.85 far-field optical system and possibility of tangential data density increment have been presented. NF technology has been studied with NA over 1 and presented demonstration of removable performance. To achieve much higher density, approach to increase NA of super-RENS by NF technology (Near-Field Super-Resolution, NFSR) can be a candidate and we think this technology would be advantageous compared to wavelength reduction or much higher NA increment of NF technology or much smaller effective optical spot size reduction of far-field super-resolution technology. In this paper we present readout result of ROM media having monotone pits using NF optical system with wavelength of 405nm and NA of 1.84 surface type SIL. GeSbTe material was used for super resolution active layer and pit length is 37.5nm which is shorter than resolution limit 55nm. We present the feasibility of NFSR technology by confirming the CNR threshold according to readout power (Pr) and CNR 33dB over threshold Pr.