• 한국사회정책
• /
• 제25권4호
• /
• pp.265-299
• /
• 2018

2015년부터 보건복지부는 지역자활센터 법인 형태를 사회적협동조합으로 전환하여 지역자활센터의 자활근로사업 위주 사업에 다양성 및 자율성을 부여하고, 자활사업 대상자 확대 및 근로빈곤층의 일자리 창출에 기여하고자 지역자활센터 유형다변화 시범사업을 시작하였다. 본 연구는 지역자활센터 유형다변화 사업이 점차 확대되는 상황에서 지역자활센터의 사회적협동조합의 전환과정과 변화 분석을 통해 긍정적인 요소를 강화하고 부정적인 요소는 제거하는데 도움이 되는 정책적 제언을 하고자 하였다. 분석 결과, 지역자활센터가 시범사업 참여, 즉 사회적협동조합으로의 전환은 지역자활센터의 주도적인 변화라기보다 조직의 지속 가능성을 모색하는 하나의 선택이었다. 그리고 이사회와 조합원 구성에서 생산자나 소비자의 참여는 저조하였고, 사회적협동조합으로의 전환은 종사자의 적극성과 책임성의 증가라는 긍정적 효과를 보였다. 또한 사회적협동조합 지역자활센터에 대한 운영비 활용의 자율성 확대로 매출 증가를 위한 적극적인 영업 활동과 전문성 제고의 결과를 낳았다. 사회적협동조합 설립 후 지역자활센터의 가장 큰 변화는 지역사회 내에서 자활사업의 인지도 향상과 지역사회 협력의 증가였다. 지역사회 네트워크를 통해서 지역자활센터가 새로운 사업에 참여하고 지자체의 우선 지원사업 대상이 되는 기회가 확대되었다. 그렇지만 사회적경제 조직이 활성화되지 않은 지역에서는 큰 변화가 없는 한계도 있었다. 지역자활센터의 사회적협동조합으로의 전환은 긍정적인 요소도 있지만 자활사업 참여자의 감소와 근로능력이 저하되는 상황을 고려한 유형다변화 사업의 방향과 내용 설계에 대한 고민이 필요하다.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.55-62
• /
• 2017

In this study, the water content and the low calorific value of the dried sludge are analyzed by using a vertical cylinder type indirect heating type dryer for evaluatation of energy source value. The vertical cylindrical thin film dryer was an Okadora Pilot Plant, and the dryer was indirect heating vertical thin film type. The internal standard consisted of 500 mm in diameter and 700 mm in height. In the drying experiment, 10 kg of dehydrated sewage sludge was added to the dryer and the total amount of the sludge was adjusted to 27 times by variable of the time, the number of revolutions and the steam temperature. The results of analysis of the 27th experiment component of the dried product showed that the average low calorific value of about 11.2 MJ/kg and the water content of 6%. This is satisfy the fuel use standard of the thermal power plant of the sludge.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.840-845
• /
• 2001

Development of a small gas-turbine combustor for 100kW class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swirler in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of 1170K, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than target value. So, we redesigned the second prototype(TS2) and conduct performance test with the critical focus on pattern factor and exit mean temperature. We adopted TS2 four variant to check the improvement of pattern factor. As the result, the pattern factors of several variants were satisfied with the performance target. Finally, We chose the TS2A variant as a final combustor for our APU model.

• 한국유체기계학회 논문집
• /
• 제9권2호
• /
• pp.7-12
• /
• 2006

This study is to develop a system of electric power generation utilizing the wind resources available in the domestic wind environment. We tested drag-type vortical wind turbine models, which have two different types of blades: a flat plate and circular arc shape. Through a performance test, conditions of maximum rotational speed were found by measuring the rpm of wind turbine. The rotational speed was measured by a tachometer in a wind tunnel and the tunnel wind speed was by using a pilot-static tube and a micro manometer. The performance test for a prototype was accomplished by calculating power, power coefficient, torque coefficient from the measurement of torque and rpm by a dynamometer controller From the measurements for miniature turbine models with two different blades, the circular arc shape was found to Produce a maximum rotational speed for the same wind velocity condition. Based on this result, the prototype with the circular arc blade was made and tested. We found that it produces 500W at the wind velocity of 10.8 m/s and the power coefficient was 20%.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.694-696
• /
• 2011

전북대학교 고온플라즈마 응용연구센터 구축사업단에서는 0.4MW/2.4MW급 Huel type 플라즈마장치 및 60kW/200kW급 RF 플라즈마 장치 구축을 목표로 건축 및 장비 지원설비가 센터 부지에 설치되고 있으며 플라즈마 장치의 구축이 완료되면 분말합성, 용사코팅, 지구 재진입 환경 모사 등 일련의 과정을 모두 한자리에서 처리할 수 있을 것으로 예상된다.

• KSTLE International Journal
• /
• 제1권2호
• /
• pp.101-106
• /
• 2000

Variable displacement axial piston pumps are widely used for raising the energy level of the fluid in hydraulic systems. And the regulator is the device which regulates the discharge flow of the piston pump by controlling the swivel angle. The regulator receives the hydraulic pilot pressure and controls the pump output flow depending on the machine load and engine speed. This work deals with constant power control (horsepower control) in the design of a regulator by using a bent-axis type piston pump. In order to effectively use engine power, we must keep the horsepower from the engine to the pump constant. Therefore the regulator operates the constant power control. As a result, optimum power usage is obtained by accurately following the power hyperbola. This study focused on developing a simulation model of a regulator. First, the governing equations of the regulator are derived, and analysis is performed by computer simulation, which can identify significant parameters of regulator. As a result, the variation of the swivel angle, flow rate, hyperbolic curve, inner leakage and responsibility are simulated, and significant parameters of a regulator are identified.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.244-251
• /
• 2001

This paper describes a design study of heat exchanger assembly to be used for low NOx condensing gas boiler. In this study, specifications of each heat exchanger components(upper and lower fin-type HEX, coil-type HEX, baffle) were investigated experimently by using model apparatus and analytical model, and comprehensive performances of the pilot gas boiler were examined. As a result, the boiler efficiency for heating and hot-water reached 90% and 94%, respectively. NOx and CO emission are less than 50ppm and 200ppm (0$_2$0% basis), respectively, which are very improved results than those of conventional bunsen-type boiler. But it is considered that supplementary investigations necessary for CO emission improvement and optimum design with boiler capacity.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.126-137
• /
• 2003

The feasibility study of UV-disinfection system was performed for disinfection of effluent from wastewater treatment plant. Three low-pressure UV lamps of 17, 25, and 41 W were examined with various flow rates. Low-pressure UV lamps of 17W were examined with various turbidity, DOM (dissolved organic matter), and SS (suspended solid). The pilot plant was a flow-through type UV-disinfection system, and the range of exposure time varied from 5 to 40 seconds, turbidity from 0 to 40 NTU, DOM from 0 to 30 mg/L, and SS from 10 to 40 mg/L. The 41W lamp demonstrated complete disinfection showing no survival ratio in all the experimental conditions, and generally 17W and 25W lamps also showed high removal ratio over 97%. For the same UV dose (UV intensity times exposure time), high intensity-short exposure conditions showed better disinfection efficiency than low intensity-long exposure conditions. While the effects of turbidity and DOM were not apparent, the effects of SS was significant on the disinfection efficiency which indicates that SS control before UV-disinfection appears to be necessary to increase removal efficiency. Considering characteristics of effluent from existing wastewater treatment plants, cost-effectiveness, stable performance, and minimum maintenance, the flow-through type UV-disinfection system with high intensity and low-pressure lamps was thought to be a competitive disinfection system for wastewater reclamation.

• 대한약침학회지
• /
• 제18권4호
• /
• pp.32-37
• /
• 2015

Objectives: The purpose of this study was to investigate the psychological characteristics of the Sasang constitutions by using Braverman nature assessment (BNA). Methods: One hundred seventy-four students participated in this study, and among them, the 142 individuals who had clearly identified Sasang constitutional types were used for the analysis. Sasang constitutions and the Braverman temperaments of the subjects were determined by using a questionnaire for the Sasang constitution classification (QSCC) II and BNA, respectively. Body mass index (BMI) was used to compare the inclinations of the Sasang constitutions and Braverman temperament types. Results: Significant differences in Braverman temperament type existed among the Sasang constitutions (P = 0.042), and the relations between Soyangin and the dopamine type and between Taeeumin and the gamma-aminobutyric acid (GABA) type were meaningful. Significant differences were also shown in the comparison with the Yin and the Yang constitutions (P = 0.017), and the post-hoc analysis showed a strong and significant relation between the Yang constitution and the dopamine type and between the Yin constitution and the GABA type. The one-way analysis of variance (ANOVA) and the independent t-test were conducted to examine the BMI and the degree of obesity among the Sasang constitutions and the Braverman temperament types. Concerning the BMI, Taeeumin showed a bigger BMI than the other constitutions (P < 0.001), but no significant differences in the BMI were observed between the Braverman temperament types. Conclusion: Soyangin has a close relationship to the dopamine type and Taeeumin has a close relationship to the GABA type. The correlation between two types were more clear when the Yin and the Yang types were compared to Braverman temperaments. These results may serve as a basis for identifying the psychological traits of Sasang constitutional types, especially in regard to the characteristics related to the four Braverman temperament types.

• 한국광학회지
• /
• 제19권1호
• /
• pp.31-35
• /
• 2008

결합효율이 높고 정렬오차 발생 시 결합효율의 저하가 작은 광통신용 비구면 렌즈 시준기를 설계하였다. 비구면 시준 렌즈는 GRIN 렌즈와 작동거리와 두께가 유사하고 외경이 동일한 원통형 막대 형태로 설계해 GRIN 렌즈를 대체할 수 있도록 하였다. 결합효율의 저하는 시준렌즈의 구면수차에 의해 주요하게 발생하므로, 비구면 렌즈 시준기가 볼 렌즈, GRIN 렌즈 및 C-렌즈 시준기보다 높은 결합효율을 가지도록 비구면 계수를 최적화 해 구면수차를 낮추었다. 설계한 비구면 렌즈 시준기의 결합효율은 기존 시준기들보다 높았으며 정렬오차에 따른 결합효율의 감소도 작았다.