• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1820-1832
• /
• 1996

The performance of a carrier recovery is severely degraded because of amplitude fluctuations and random phases of the received signai caused by multipath fading in mobile radio channel. In this paper, we present two kinds of carrier recovery technique using pilot tone such as TCT(Tone Calibration Technique) and DTCT(Dual Tone Calibration Technique) and analyze these performance both in Rayleigh and Rician fadings. we also evaluate the BER performance of two carrier recovery systems in terms of design parameters such as pilot-to-singnal power ratio, and detection filter-to-pilot filter bandwidth ratio.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.75-82
• /
• 2000

In this Paper, a new type of feedforward linearizer using a delay line which controls the phase characteristics of the correction amplifier block is proposed. The extra delay line provides the control-ability of IM signals so that the IM rejection is accomplished without the conventional pilot tone. The error signal loop consists of several key components such as phase shifter and attenuator, subtractor. These key components are replaced by new designs in order to obtain better linearization characteristics without the pilot tone generator which is indispensable in the conventional linearizer designs. The proposed linearizer was designed at Korean PCS band and combined with 35W HPA manufactured by KMW inc., and tested with two-tone signals separated 0.6MHz apart at the center frequency of 1855MHz. The experimental results show C/l improvement by 16.9 ~ 24.6 dB over 15 dB dynamic range(30 ~45 dBm) which gave IMD of 58.5~63.2 dBc for the designed LPA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.998-1004
• /
• 2002

This paper reports a design of feedforward linear power amplifier using pilot tone for IMT-2000 band repeaters accepting multi-carrier. As this time pilot tone is applied to the circuit differently from the existing method. Only one pilot tone is used in both 1-st loop(IMD abstraction loop) and 2-nd loop(IMD cancellation loop) to cancell IMD signals automatically according to variation of frequency or power level of input signals. As an experiment, in range of 2110 MHz - 2170 MHz at LPA output power of $20 W_{avg}$, IMD characteristics of over 20 dB was improved maintaining below -60 dBc considering respective 20 MHz. Therefore the supposed feedforward linear power amplifier can be used for linear power amplifier in IMT-2000 band repeaters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.806-808
• /
• 2015

In this paper, we suggest the method of pilot tone design for a compressed channel sensing in order to decrease the peak to average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.6-12
• /
• 1999

It is difficult to realize adaptive main carrier rejection circuit in feedforward-type LPA(Linear Power Amplifier) because the gain and nonlinear characteristics of power amplifier are changed according to operating frequency, voltage, temperature. Usually, pilot tones are used for adaptive LPA operation. but in this paper, the relative phase, which in obtained through I&Q demodulator using input signals as LO signals and main-path & sub-path signals as RF signals, and the magnitude of main-path & sub-path signals are compared, so main carrier rejection is obtained. The proposed method rejects main carriers by 28.34 ~ 34.66dB (@Po=36.2 ~ 28.2 dBm/tone) with two tones at 877MHz, 882MHz and also rejects main carriers by 31.3dB despite changing condition of operating voltage.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.82-89
• /
• 2021

Purpose: This study is to investigate the muscle activity based on real-time visual feedback training methods by rehabilitative ultrasound image in elderly and correlation between Heckmatt scale grade, muscle tone and thickness. Design: Cross-sectional study: Pilot study Methods: 6 elderly participated in the study with 2 conditions. Under the condition of rehabilitation ultrasound imaging equipment, all subjects performed voluntary maximal muscle contraction of the quadriceps 3 times using visual feedback based on Rehabilitative Ultrasound Imaging 1.0 (RUSI 1.0). Under the condition of only ultrasound images, all subjects performed voluntary maximal muscle contraction of the quadriceps 3 times using ultrasound image-based visual feedback. The muscle thickness and tone of the quadriceps were measured and the grades were classified by Heckmatt scale and all variables were comparative analyzed. Results: Heckmatt scale grade showed a negative correlation with muscle thickness at relaxation (p<0.05), and a negative correlation with the difference value obtained by subtracting muscle thickness at relaxation from muscle thickness at contraction in ultrasound image condition (p<0.05). The muscle tone during relaxation showed a negative correlation with the muscle thickness during relaxation (p<0.05). Conclusion: In the case of voluntary maximum muscle contraction of the quadriceps muscle in the elderly, it can be seen that the muscle thickness is getting larger when the RUSI 1.0-based visual feedback is provided than with only ultrasound image provided. And the lower Heckmatt scale grade is, the thicker the muscle is, and the lower the muscle tone is.

• Archives of Plastic Surgery
• /
• v.42 no.1
• /
• pp.52-58
• /
• 2015

Background The erbium:yttrium scandium gallium garnet (Er:YSGG) laser differs from other laser techniques by having a faster and higher cure rate. Since the Er:YSGG laser causes an appropriate proportion of ablation and coagulation, it has advantages over the conventional carbon dioxide ($CO_2$) laser and the erbium-doped yttrium aluminum garnet (Er:YAG) laser, including heating tendencies and explosive vaporization. This research was conducted to explore the effects and safety of the Er:YSGG laser. Methods Twenty patients participated in the pilot study of a resurfacing system using a 2,790-nm Er:YSGG laser. All patients received facial treatment by the 2,790-nm Er:YSGG laser system (Cutera) twice with a 4-week interval. Wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture were measured. Results Study subjects included 15 women and five men. Re-epithelization occurred in all subjects 3 to 4 days after treatment, and wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture within 6 months of treatment. Conclusions The 2,790-nm YSGG laser technique had fewer complications and was effective in the improvement of scars, pores, wrinkles, and skin tone and color with one or two treatments. We expect this method to be effective for people with acne scars, pore scars, deep wrinkles, and uneven skin texture and color.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.128-136
• /
• 2001

This paper evaluates the performance of an optic link in a frequency conversion based fiber-radio system. The proposed link structure simplifies a BS(base station) via making the MMW(millimeter wave) optical pilot tone generated in the CS(control station) be used in the uplink as well as in the downlink. To acquire the optical pilot tone, an EOM(electro-optic modulator) in the CS is biased in three different ways, i.e., MAB(maximum bias), MIB(minimum bias), QB(quadrature bias). We, depending on the biasing of the EOM, evaluate the link performances in two cases; one is for constant laser source power and the other for constant received DC optical power at a PD(photo detector). Based on the simulation results on the downlink CNR and the uplink SFDR(spurious free dynamic range), we finally deduce the effective EOM biasing for each case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.791-798
• /
• 2015

It has been grown interests of the convergence technologies about communication systems and vehicular industry. Vehicular communications enable a number of infotainment applications to serve cars under high mobility environments. To achieve this goal, a robust and accurate channel estimation scheme is of great importance. This paper proposes an enhanced Decision-Directed channel estimation scheme called PTAU(Pilot Tone Aided Update) for IEEE 802.11p in vehicular communication environment. Existing approaches which use subsequent data symbols to estimate channel response in time domain will lead to the error propagation. In this paper, we use the pilot subcarriers to get initial channel response, then utilize the correlation characteristics to update channel response in frequency domain. Finally, Analysis and simulation results reveal that the proposed scheme outperforms in bit error rate(BER), significantly improve the performance of the estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.657-662
• /
• 2003

The OPM(optical performance monitoring module) is needed in order to monitor optical performance. the most importance of OPM is to measure the wavelength of optical signal. In the past time, it was very difficult to get the wavelength value because they used pilot tone. Since then, using AWG(arrayed waveguide grating) and AOTF(acousto optic tuneable filter), the wavelength and the transmission qualify for multi channel signal have been monitored. In this paper, we chose the fiber fabry-perot wavelength variable filter which be evaluated for optical resolution ability to excellent, so that FBG(fiber bragg grating) was used for setting reference wavelength because chose a wavelength variable filter.