• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.137-139
• /
• 2003

Transducer for ultrasonic linear motor with the symmetric and anti-symmetric modes was studied. The ultrasonic linear motor consists of two Langevin type piezoelectric vibrators that cross at right angles with each other in tip. In order to excite symmetric and anti-symmetric modes, the transducer must have a phase shift of 90 degree in space and time. Therefore, the tip of transducer moves on an elliptical motion. In this paper, the finite element analysis was used to optimize dimension and displacement of the transducer The ultrasonic motor was fabricated using the simulated result and the driving characteristics were measured. No-load velocity was 0.28[m/s] and the maximum efficiency was 30[%] in resonance frequency.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권2호
• /
• pp.33-37
• /
• 2000

The authors fabricated ultrasonic transducer with PVDF[poly(vinylidene fluoride)] piezoelectric polymer film. When impulse waves were applied to the PVDF ultrasonic transducer, the dependence of the response properties on the backing material with copper was investigated through not only theoretical calculations using Mason's equivalent circuit but also experimental measurements. The experimental pulse response properties agree with those of the theoretical calculations and the pulses were shorter than those for a PZT transducer. If such short-pulse properties are used in an medical ultrasonic image diagnosis apparatus, the resolution of the apparatus will be improved. When the insertion loss was calculated theoretically to the PVDF ultrasonic transducer, the frequency characteristics of its showed wideband frequency.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.199-206
• /
• 2015

This paper deals with the vibration characteristics of stacked transducers composed of piezoelectric discs, which are main elements of ultrasonic sensors or actuators. The stacked transducers were devised in the sense of natural frequencies. Two- or three-layer transducers were fabricated with piezoelectric discs of different diameters. The natural frequencies were determined by the finite element analysis and they were verified by comparing them with experimental results. It appeared that the natural frequencies of the stacked piezoelectric transducers include the natural frequencies of the constituent piezoelectric discs and the natural frequencies caused by stacking. Based on these results, it would be possible to predict the vibration characteristics of the stacked piezoelectric transducers in a design process.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.585-596
• /
• 2012

PVDF와 P(VDF-TrFE)로 대별되는 압전고분자는 종래의 대표적인 압전재료인 PZT에 비해 전기음향변환효율이 떨어지며 내부손실이 큰 단점은 있으나, 음향임피던스가 물 또는 생체와 비슷하고 수신효율이 우수하며 광대역 특성을 나타내는 등의 장점을 가진 재료이다. 또한 다른 압전재료에 비해 얇은 막으로의 제작이 쉽고, 그 막은 유연하므로 복잡한 곡면을 갖는 고주파 초음파 트랜스듀서 재료로 유용하다. 그러한 특성은 생의학적 응용에 적합한바, 다양한 형태의 초음파 트랜스듀서가 연구 개발되어져 왔다. 본 논문에서는 먼저, 압전고분자막을 이용하여 초음파 트랜스듀서를 설계 제작하는데 있어서 고려해야할 몇 가지 주요사항을 기술하고, KLM 모델을 사용한 해석을 통하여 그 고려사항들이 트랜스듀서의 동작에 미치는 영향을 파악하였다. 다음으로, 의학적 또는 생물학적 응용을 목적으로 초음파 영상을 얻고 있는 몇몇 주요 응용분야에서 사용되는 압전고분자 트랜스듀서의 구조와 그것을 이용하여 얻은 영상의 특징에 대하여 간략히 해설하였다.

• 대한의용생체공학회:의공학회지
• /
• 제43권5호
• /
• pp.319-330
• /
• 2022

In this study, the optimal driving frequency was derived through finite element analysis (FEA) to optimize the developed piezoelectric ultrasonic medical devices(PUMD) for bone surgery. The core of the PUMD is the piezoelectric ceramic (PZT), which is a vibrator that generates vibration energy. The piezoelectric ceramic shows the maximum current value with respect to the input voltage at the resonance frequency, which generates the maximum mechanical vibration. In the past, various studies have been conducted related to the analysis of PUMD, but most of the research so far has been limited to free vibration analysis. However, in order to derive the accurate resonant frequency, the initial stress generated by bolt tightening in the bolt-clamped Langevin type transducer (BLT) must be considered. In this study, after designing a PUMD, the driving performance according to the bolt tightening value was analyzed through FEA, and this was experimentally verified. First, the resonance mode and frequency response were confirmed through modal and harmonic analysis at 20-40 kHz, which is known as the optimal driving frequency band of PUMD for bone surgery. In addition, the design of the PUMD was confirmed by checking the mechanical behavior of the tip and the piezoelectric ceramic at the resonant frequency. Consequentially, the characteristic evaluation was performed, and it was confirmed that the resonant frequency result derived through the FEA was reasonable. Through this study, we presented a more rational FEA method than before for BLT transducers. We expect that this will shorten the time and cost of developing a PUMD, and will enable the development of more stable and high-quality products.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.735-738
• /
• 2003

Downsizing electronics requires precision position control with an accuracy of sub-micron order, which demands development of ultra-fine displacive devices. Piezoelectric transducer is one of devices transferring electric field energy into mechanical energy and being capable for fine displacement control. The transducer has been widely used as fine Position control device Multilayer piezoelectric actuator, one of typical piezo-transducer, is fabricated by stacking alternatively ceramic and electrode layers several hundred times followed by cofiring process. Electrode material should be tolerable in the firing process maintaining at ceramic-sintering temperatures up to $1100{\sim}1300^{\circ}C$. Ag-Pd can be used as stable electrode material in heat treatment above $960^{\circ}C$. Besides, adding small quantity ceramic powder allow the actuator to be fabricated in a good shape by diminishing shrinkage difference between ceramic and electrode layers, resulting in avoidance of crack and delamination at and/or nearby interface between ceramic an electrode layers. This study presents synthesis of nano-oxide-added Ag/Pd powders and its feasibility to candidate material tolerable at high temperature. The powders were formed in a co-precipitation process of Ag and Pd in nano-oxide-dispersed solution where Ag and Pd precursors are melted in $HNO_3$ acid.

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.29-36
• /
• 2007

최근 기존 공기 전도형 보청기의 문제점과 불편함을 해결하기 위해 이식형 보청기인 인공중이 (Implantable middle ear hearing devices, IMEHDs)가 미국, 일본, 한국 등에서 활발히 연구 개발되고 있다. 본 논문은 인공중이용 진동체로서 PZT 적층 압전체 기반의 플로팅 매스 트랜스듀서의 설계 및 구현에 관한 것이다. 인공중이용 압전 플로팅 매스 트랜스듀서 (piezoelectric floating mass transducer, PFMT)의 기계적 진동 특성을 구하기 위한 근사적 모델링과 이의 해석을 위한 전기적 변환을 통한 진동 특성 분석을 수행하여 트랜스듀서 설계에 반영하여 구현하였다. 구현된 PFMT를 본 연구팀이 개발한 완전 이식형 인공중이 시스템 시작품에 적용하였으며, PFMT의 성능을 확인하기 위해 PFMT를 사체 이소골에 장착한 후 이소골 진동변위를 측정하는 실험을 행하였다. 이를 통해 본 논문에서 설계 및 구현된 PFMT의 인공중이용 진동 트랜스듀서로서 유효성을 확인하였다.

• 한국결정성장학회지
• /
• 제33권3호
• /
• pp.116-123
• /
• 2023

압전 HIFU 트랜스듀서는 바이오 의료분야에 적용되고 있는 새로운 기술로 발생한 초음파 에너지를 열로 변환하여 사용하는 디바이스이다. 최근 HIFU 디바이스는 7 MHz 이상의 고 작동 주파수를 갖는 디바이스를 개발하는 추세이다. 본 논문에서는 유한요소법을 이용해 10MHz 작동주파수를 갖는 HIFU 트랜스듀서에 의해 발생된 tissue에서의 음압 및 온도분포를 계산하고, 압력의 focusing 특성 등을 분석하였다. HIFU의 형상변수로는 압전소재 두께, 렌즈 형상, 물 높이, 필름의 두께 등을 고려하였다. 그 결과, 디바이스의 발생 음압은 렌즈의 H_L/R_L 비가 증가함에 따라 증가하다 일정한 값에 도달하는 경향을 보이고 있다. 그러나 디바이스의 focusing 면적은 렌즈의 H_L/R_L 비가 증가함에 급격하게 감소하는 특성을 보이고 있다. 최적 형상을 갖는 HIFU 디바이스의 경우, 최대 음압 및 온도는 각각 19 MPa 및 65도 정도로 분석되었다. 또한 축방향 및 이와 수직한 방향에서 -3 d B 초점 거리는 각각 2.3 mm 및 0.23 mm 정도인 것으로 나타났다

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.275-280
• /
• 1999

Deep-water sonar transducers of FFR (Free Flooded Ring) type have been designed using a coupled FE-BEM. The proposed sonar transducers are composed of piezoelectric ceramic tubes and structural steel materials for simple fabrication. In order to have an omnidirectional beam pattern around 30 kHz, a conic steel is placed below a piezoelectric tube or a steel disc is placed between two piezoelectric tubes. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with external electrical excitation conditions. Various results are available such as directivity patterns and transmitting voltage responses. The most optimal structure and dimensions of the steel material were calculated, so that the beam patterns of the sonar transducers had +/- 3 dB omnidirectivity at 30 kHz.

• 한국정보통신학회논문지
• /
• 제8권8호
• /
• pp.1818-1827
• /
• 2004

본 논문에서는 압전평면판에 홈을 파 형성한 (equation omitted)형 선형배열음원과 최적화 알고리즘을 조합한 적응 지향성합성 시스템의 2차원 지향성합성 문제를 수치적으로 검토하였다. 임의로 설정한 목적 지향성을 실현하기 위하여 먼저, 선형배열 진동자의 최적 진동 변위량은 최적화 알고리즘인 DFP (Davidon-Fletcher-Powell) 법을 이용하여 계산하고, 다음에, 계산된 진동 변위량을 구동하기 위한 최적 전위의 계산은 유한요소법과 DFP법을 이용하여 행했다. 또한, 유한요소법을 이용하여 (equation omitted)형 압전 트랜스듀서의 2차원 진동해석을 행했다.