• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.549-557
• /
• 2019

More than two decades of world-wide research efforts have resulted in several classes of potentially important materials. Among them are incipient piezoelectrics, which are especially useful for actuator applications. However, relatively large electric fields are required for activating the large incipient electromechanical strains. So far, many attempts have been made to reduce the required electric field by intentionally inhomogenizing the electric field distribution in the microstructure through core-shell and composite approaches. Here, we show that electric field concentration can be realized simply by adjusting electrode patterns. We have investigated the effect of electrode patterning on the incipient electromechanical strain properties of an exemplarily chosen lead-free relaxor system, revealing that electrode patterning does have a significant role on the strain properties of the given lead-free relaxor system. We believe that this approach would make a new strategy for ones to consider bringing the functional properties of electroceramics beyond their conventional limit.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.157-162
• /
• 2013

The need for lead-free piezoceramics has caused a renewal of interest in $BaTiO_3$-based systems. Recently, it was found that ceramics in the $(Ba,Ca)(Zr,Ti)O_3$ system have properties comparable to those of $Pb(Zr,Ti)O_3$. However, these ceramics require rather high sintering temperatures of $1450-1550^{\circ}C$. In this work, the effect of $TiO_2$ and CuO addition on the sintering behavior, microstructure, dielectric and piezoelectric properties of $(Ba_{0.85}Ca_{0.15})(Zr_{0.1}Ti_{0.9})O_3$ (BCTZ) ceramics will be discussed. BCTZ ceramics were prepared by the mixed oxide route and 1 mol % of $TiO_2$ or CuO was added. Undoped and doped ceramics were sintered at $1350^{\circ}C$ for 1-5 h. CuO was found to be a very effective sintering aid, with samples sintered for 1 h at $1350^{\circ}C$ having a bulk density of 95% theoretical density; however the piezoelectric properties were greatly reduced, probably due to the small grain size.

• 한국음향학회지
• /
• 제26권2호
• /
• pp.80-86
• /
• 2007

본 연구에서는 압전세라믹과 고분자재료를 사용하여 다이스와 필 방법으로 2-2형 압전복합재료를 제작하고 이것을 이용하며 초음파 센서를 설계하고 제작하여 전기적 및 음향 특성을 조사하였다. 제작된 시편의 공진특성은 유한요소 해석 결과와 임피던스 분석기(HP4194A)를 이용하여 실제로 측정한 결과와 유사하게 나타났다. 2-2형 압전복합재료의 고유음향 임피던스는 PZT의 부피분율이 감소함에 따라 선형적으로 감소하였다. 이것을 이용하여 제작된 초음파 센서의 공진특성 및 전기기계결합계수는 PZT의 부피분율이 0.6일 때 가장 우수하였다. 또한, 이것의 음향특성을 측정한 결과 PZT 부피분율이 0.6일때 진폭, 주파수 대역폭, 울림감쇠 특성 등이 가장 우수하게 나타났으며, 단일 압전세라믹으로 제작된 센서에 비하여 상당히 우수한 감도 특성을 나타내었다.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.367-384
• /
• 2011

This paper presents the design and experimental evaluation of fast output sampling feedback controller to minimize structural vibration of a cantilever beam using Shape Memory Alloy (SMA) wires as control actuators and piezoceramics as sensor and disturbance actuator. Linear dynamic models of the smart cantilever beam are obtained using online recursive least square parameter estimation. A digital control system that consists of $Simulink^{TM}$ modeling software and dSPACE DS1104 controller board is used for identification and control. The effectiveness of the controller is shown through simulation and experimentation by exciting the structure at resonance.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.690-695
• /
• 2005

We have investigated on the development of 2-2 mode piezocomposites that have better piezoelectric activity and lower acoustic impedance than those of conventional piezoceramics. In this study, we have investigated the electrical properties and acoustic impedance of 2-2 mode piezocomposite which were fabricated using the dice-and-fill technique for the different volume fractions of PZT The volume shrinkage of polymer is an important factor in 2-2 mode piezocomposites fabrication. The thickness mode electromechanical coupling factor($\kappa_t$) of PZT was compared with that of piezocomposites. It was shown that the 2-2 mode piezocomposites were much better than the PZT only. The acoustic impedance of 2-2 mode piezocomposites decreased linearly when PZT volume fraction was decreased.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.283-290
• /
• 2002

In this paper, we consider the dynamic electromechanical behavior of an eccentric Yoffe permeable crack in a piezoelectric ceramic strip sandwiched between two elastic orthotropic materials under the combined anti-plane mechanical shear and in-plane electrical loadings. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. The initial crack propagation orientation for PZT-5H piezoceramics is predicted by maximum energy release rate criterion.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.215-218
• /
• 2005

We have investigated on the development of 2-2 piezocomposites that have better piezoelectric activity and lower acoustic impedance than those of conventional piezoceramics. In this study, we have investigated the piezoelectric and acoustic properties of 2-2 piezocomposites sensor which were fabricated using dice-and-fill technique for the different volume fraction of PZT. The resonance characteristics measured by an impedance analyzer were similar to the analysis of finite element method. The resonance characteristics and the electromechanical coupling factor were the best when the volume fraction PZT was 0.6. It also showed the highest result from the standpoint of sensitivity, bandwidth and ring-down property and so on at the same condition. The specific characteristics shows that the 2-2 piezocomposites turned out to be superior to the ultrasonic sensor composed by single phase PZT.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.721-723
• /
• 1992

The electrical resistivity and piezoelectric properties have been studied for Lead Zirconate-Titanate(PZT) with $Nb_2O_5$ dopant, fabricated from conventional mixed-oxide powders and molten salt synthesis. The resistivity and electromechanical coupling factor(Kp) were increased with increasing Nb contents. The reason for increasing of the electrical resistivity below the Curie Temperature(Tc), It is believed that the p-type electrical conduction in PZT is caused by the lead vacancies. The electromechanical coupling factor(Kr) and piezoelectric constant $d_{33}$ were improved by Nb additives. This behavior can be explained as a compensation effect and $Nb^{5+}$ can serve as a donar and contribute electrons to the conduction process. As a result, the optimized $Nb_2O_5$ dopants on the PZT specimens were 0.75 wt%.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.401-407
• /
• 2008

The dynamic model and displacement control of piezoelectric actuators, which are commercially available materials for managing extremely small displacements in the range of sub-nanometers, are presented. Piezoceramics have electromechanical characteristics that transduce energy between the electrical and mechanical domains. However, they have hysteresis between the input voltage and output displacement, and this behavior is very demanding and complicated. In this paper, we propose a method of designing the control algorithm, and present the dynamic modeling equations that represent the hysteretic behavior between input voltage and output displacement. For this process, the piezoelectric actuator is treated as a second-order linear dynamic system and system constants are determined by the system identification method. Also, a classical PID controller is designed and used to regulate the output displacement of the actuator. To evaluate the performance of the proposed method, numerical simulation results are presented.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.12-19
• /
• 2001

In this study, the physical properties of the piezoelectric sounder with metal-piezoelectric ceramics were analyzed. The dielectric and piezoeletric properties of 0.5wt% MnO$_2$ and NiO doped 0.1Pb(Mg$\_$1/3/Nb$\_$2/3/)O$_3$-0.45PbTiO$_3$-0.45PbZrO$_3$ ceramics were investigated aiming at acoustic transducer applications. The acoustic characteristics of a thin circular disc-type with metal-piezoceramics have been investigated. Also, the acoustic characteristics for the geometrical form of case were investigated. The piezoelectric sounder with 200kHz resonant frequency and 20kHz bandwidth was designed by considering the sharp directivity and the sound pressure.