• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.347-351
• /
• 2010

Isoflavones have received much attention because of their health-related and clinical benefits such as estrogenic and anti-oxidative activities as well as triggering of natural killer cell activity. However, there are few publications reporting the pharmacokinetic profiles together with physicochemical properties of main isoflavones. Therefore, the pharmacokinetic parameters of main aglycones, daidzein, glycitein and genistein after oral administration of soybean extracts were investigated and the physicochemical properties of soybean extracts were characterized. It was observed that angle of repose was $46^{\circ}$ and tap density, bulk density and porosity were 10.12, 4.3 and $0.86\;g/cm^3$ and the mean $AUC_{last}$ of daidzein, glycitein and genistein was $11.376\;{\mu}g{\cdot}h/mL$, $3.045\;{\mu}g{\cdot}h/mL$ and $0.825\;{\mu}g{\cdot}h/mL$, respectively. Cell viability was 60% at a concentration of 10 mg/mL. Taken together, it was suggested that isoflavones were contained in the soybean products and had an antioxidant activity and this study would be the basis to control the quality of soybean products and study of the bioequivalence between soybean products in future.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.2
• /
• pp.1-15
• /
• 2011

Mozzarella cheese is recently the most consumed cheese in USA, European, South Korea, etc., and also a various different-type Mozzarella cheese could have great market appeal. However, many consumers would be more concerned about the nutritional aspects and physicochemical properties of Mozzarella cheese. Hence, ultrafiltration (UF) as a best tool of solving those concerns has been recognized. The objective of this review's paper would be suggested that the ultrafiltration (UF) techniques could be directly applied for manufacturing various different-type Mozzarella cheese with high physicochemical properties on fulfilling the consumers' various needs and desires for health.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.271-276
• /
• 2010

Strawberry powder was incorporated into Baikseolgi by substituting the non-glutinous rice flour in the range of 0-8% based on the total weight of the non-glutinous rice flour and the effects on physicochemical and sensory properties were investigated. pH decreased significantly with the higher amount of strawberry powder in the formulation whereas titratable acidity showed a reverse trend (p<0.05). Moisture content also decreased significantly with the increasing amount of strawberry. Lightness ($L^{*}$-value) decreased significantly with higher strawberry powder concentration, indicating that the color of Baikseolgi became dark as also indicated by the visual observation. Redness ($a^{*}$-value) and yellowness ($b^{*}$-value), on the other hand, increased significantly with the substitution of strawberry powders up to 8% (p<0.05). Increases in strawberry powder concentration up to 8% in the Baikseolgi formulation significantly increased the intensities of sensory color, flavor, and taste attributes; on the other hand, the intensities of sensory moistness and chewiness decreased significantly (p<0.05). Results from the consumer test revealed that control received the highest acceptability scores in all attributes but 4% sample also obtained the competitive scores. Finally, Pearson correlation analysis revealed several very highly significant linear correlation between the means used to access physicochemical, sensory properties, and consumer preferences.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.4
• /
• pp.345-353
• /
• 2022

This study compared the physicochemical and gelatinization properties of naked barley, tetrastichum barley, and waxy barley. Compared to tetrastichum barley and waxy barley, naked barley had shorter and rounder grains with a 1.43 length/width ratio. Tetrastichum barley had lower crude protein, crude lipid, and crude ash content and higher amylose content compared to naked barley and waxy barley. The L, a, b color values of waxy barley were significantly higher than those of naked barley and tetrastichum barley. The water absorption index (WAI) and the water soluble index (WSI) were highest in waxy barley. The X-ray diffraction pattern was type A in all samples, and the peak intensity was highest in waxy barley. The maximum viscosity, cooling viscosity, breakdown, and setback of amylogram properties were the highest in tetrastichum barley. The thermal properties through the differential scanning calorimeter showed that the waxy barley had higher values of the onset, peak, conclusion temperature and enthalpy (?H). In conclusion, the variety of barley influenced the physicochemical and gelatinization properties, which could be important factors in the manufacture of processed foods. These results would thus useful inputs for the manufacturing of these foods using barley.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.441-453
• /
• 2023

The objective of this study was to investigate the physicochemical and microbiological characteristics of round of Hanwoo by vacuum packaging film materials, polyvinylidene chloride (PVDC) and ethylene vinyl alcohol (EVOH). The packaged beef samples were stored in refrigerated conditions (2±1℃) for 12 weeks. Physicochemical analysis with pH, surface color, thiobarbituric acid reactive substances (TBARS) values, and volatile basic nitrogen (VBN) values and microbiological analysis with aerobic plate count (APC) and metagenomic analysis of packaged beef samples were performed. The pH and surface color did not change substantially during the 12 weeks and EVOH-packaged beef tended to be lower than those of PVDC-packaged beef. PVDC- and EVOH-packaged samples showed low TBARS and VBN values below standard limits. APC did not exceed 7 Log CFU/g for both samples during storage. In metagenomic analysis, Firmicutes and Lactobacillaceae were dominant phylum and family of the PVDC- and EVOH-packaged beef. In both packaged samples, Dellaglioa algida was the dominant species during storage, with the notable difference being the presence of Lactococcus piscium. Therefore, this study provided the information on the quality of vacuum-packaged beef according to different vacuum films for long-term refrigerated storage.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.5
• /
• pp.356-364
• /
• 2023

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freeze-drying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

• Food Science of Animal Resources
• /
• v.35 no.6
• /
• pp.772-782
• /
• 2015

This study was performed to explore the deterioration of physicochemical quality of beef hind limb during frozen storage at −20℃, affected by repeated freeze-thaw cycles. The effects of three successive freeze-thaw cycles on beef hind limb were investigated comparing with unfrozen beef muscle for 80 d by keeping at −20±1℃. The freeze-thaw cycles were subjected to three thawing methods and carried out to select the best one on the basis of deterioration of physicochemical properties of beef. As the number of repeated freeze-thaw cycles increased, drip loss decreased and water holding capacity (WHC) increased (p<0.05) till two cycles and then decreased. Cooking loss increased in cycle one and three but decreased in cycle two. Moreover, drip loss, WHC and cooking loss affected (p<0.05) by thawing methods within the cycles. However, pH value decreased (p<0.05), but peroxide value (p<0.05), free fatty acids value (p<0.05) and TBARS value increased (p<0.05) significantly as the number of repeated freeze-thaw cycles increased. Moreover, significant (p<0.05) interactive effects were found among the thawing methods and repeated cycles. As a result, freeze-thaw cycles affected the physicochemical quality of beef muscle, causing the degradation of its quality.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.280-284
• /
• 2003

To develope of diagnosis and estimation system for utility of fungicides and insecticides as crop protection agents, various 10 physicochemical parameters, hydrophobicity (LogP), dipole moment (DM), HOMO energy, LUMO energy, molar refractivity $(MR:\;cm^3/mol)$, polarizability $(Pol:\;A^3)$, van der Waals molecular surface area $(A^2)$, van der Waals molecular volume $(Vol:\;cm^3)$, molecular weight (amu), hydration energy (Kcal/mol) for the active ingredients of 133 fungicides and 152 insecticides were calculated. And then the distribution ranges for each of the physicochemical parameters in fungicides, sterol biosynthesis inhibitors (DMI: demethylation inhibitor), insecticides and acetylcholine esterase inhibitors (AChE) were confirmed. It is suggested that the various compounds based on the range of the physicochemical parametes could be predicted for possibilities as fungicides and insecticides.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.437-444
• /
• 2019

Background: Headache/eyestrain symptoms are common health problems that people experience in daily life. Various studies have examined risk factors contributing to headache/eyestrains, and physicochemical exposure was found to be a leading risk factor in causing such symptoms. The purpose of this study was to examine the relationship of headache/eyestrain symptoms with physicochemical exposure among Korean construction workers depended on worksite. Methods: This study used data from the 4th Korean Workers Conditions Survey and selected 1,945 Korean construction workers as participants. Multivariable logistic regression analysis was used to determine the relationship. Results: Exposure to vibrations among all construction workers affected the moderate exposure group [odds ratio (OR) 1.53, 95% confidence interval (CI) 1.01-2.32], the high exposure group (OR 1.77 95%CI 1.17-2.67), and the indoor high exposure group (OR 1.61, 95%CI 1.02-2.55) and among outdoor construction workers, the moderate group (OR 6.61, 95%CI 15.4-28.48) and the high group (OR 6.61, 95%CI 1.56-27.98). When exposed to mist, dust, and fumes, the indoor high exposure group was significantly affected (OR 1.63, 95%CI 1.07-2.47). All construction workers exposed to organic solvents were affected, high exposure group (OR 1.69, 95%CI 1.15-2.49) and indoor high exposure group (OR 1.77, 95%CI 1.08-2.89). The high exposure group in all construction worker (OR 1.70, 95%CI 1.20-2.42) and the indoor high exposure group (OR 1.83, 95%CI 1.17-2.89) also were affected by secondhand smoking exposure. Conclusion: Many physicochemical exposure factors affect headache/eyestrain symptoms among construction workers, especially indoor construction workers, suggesting a deficiency in occupational hygiene and health environments at indoor construction worksites.

• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.388-401
• /
• 2017

Purpose: The physicochemical properties of a xenograft are very important because they strongly influence the bone regeneration capabilities of the graft material. Even though porcine xenografts have many advantages, only a few porcine xenografts are commercially available, and most of their physicochemical characteristics have yet to be reported. Thus, in this work we aimed to investigate the physicochemical characteristics of a porcine bone grafting material and compare them with those of 2 commercially available bovine xenografts to assess the potential of xenogenic porcine bone graft materials for dental applications. Methods: We used various characterization techniques, such as scanning electron microscopy, the Brunauer-Emmett-Teller adsorption method, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and others, to compare the physicochemical properties of xenografts of different origins. Results: The porcine bone grafting material had relatively high porosity (78.4%) and a large average specific surface area (SSA; $69.9m^2/g$), with high surface roughness (10-point average roughness, $4.47{\mu}m$) and sub-100-nm hydroxyapatite crystals on the surface. Moreover, this material presented a significant fraction of sub-100-nm pores, with negligible amounts of residual organic substances. Apart from some minor differences, the overall characteristics of the porcine bone grafting material were very similar to those of one of the bovine bone grafting material. However, many of these morphostructural properties were significantly different from the other bovine bone grafting material, which exhibited relatively smooth surface morphology with a porosity of 62.0% and an average SSA of $0.5m^2/g$. Conclusions: Considering that both bovine bone grafting materials have been successfully used in oral surgery applications in the last few decades, this work shows that the porcinederived grafting material possesses most of the key physiochemical characteristics required for its application as a highly efficient xenograft material for bone replacement.