• Journal of Environmental Health Sciences
• /
• v.14 no.1
• /
• pp.33-38
• /
• 1988

Natural mineral water is generally quite different from ordinary drinking water due to its original nature and various properties. The complexity of natural mineral water requires, therefore, not only to identify its nature and proper characteristics, but also to classify them by a reasonable scientific basis of comparison. The study was concentrated on a possible classification technique to natural mineral waters by their constitutions and physico-ehemical properties. The classification was carried out by the computation of such numerical parameters as ionic equivalent percentage, electrolytic conductance or mobility, ionic molecular weight, molecular concentration, equivalent conductivity and degree of ionization in consideration of the determinative criteria as follows -particular single element or molecule -major components of natural waters as bicarbonate, sulphate, chloride,caloride, calcium, magnesium, and sodium -moleculat concentration related to blood osmotic pressure -water temperature at emergence from spring -contents of free carbon dioxide (CO2) -pH value of water -total dissolved solids or salts (NaCl) The results obtained proved out to be clearly distinguhhable from ordinary drinking water as far as concern natural mineral water as an example on the subject -simple water -bicarbonate-predominating water -cold spring -carbonated-non gaseous water -weak alkaline water -non saline water Putting these various results together, the sample turned out to be a kind of natural mineral water that can be used as a drinking water if microbiologically safe.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.247-255
• /
• 2014

Consumers have become very conscious about their nutrition and well being due to changes in their socio-economic lifestyle and rapid urbanization. Therefore, development of technology for production of low cost and functional meat products is urgently required. One such approach is innovative restructuring technology in which binding of meat pieces still remains the main challenge and extension of product is generally associated with poor binding and texture. Thus, the present study was envisaged as an attempt to solve this problem by the incorporation of flaxseed flour (FF) as bind enhancing agent. The FF was used at three different levels viz., 0.5%, 1%, and 1.5% to replace lean meat in pre-standardized restructured mutton chops formulation. The products were subjected to analysis for physico-chemical, sensory and textural properties. Cooking yield, moisture percentage and fat percentage increased with increase in the level of incorporation of FF, however, protein percent and pH decreased with increase in the level of incorporation. Shear force value of product incorporated with 1.5% FF was significantly higher (p<0.01) than control and product containing 0.5% FF level. Among the sensory attributes, product with 1% flaxseed flour showed significantly higher values (p<0.05) for general appearance, binding, texture and overall acceptability. Hardness showed significant increasing (p<0.01) values with increasing levels of incorporation of flaxseed flour, however all other parameters of texture profile analysis showed a decreasing trend. On the basis of sensory scores and physico-chemical properties, the optimum incorporation level of FF was adjudged as 1%. Products incorporated with optimum level of flaxseed flour (1%) were also assessed for water activity and microbiological quality during the storage period of 15 days. It was found that the extended restructured product could be safely stored under refrigeration ($4^{\circ}C{\pm}1^{\circ}C$) in low density polyethylene (LDPE) pouches for 15 days without marked deterioration in sensory and microbiological quality. Thus, it was concluded that flaxseed flour can be used as a good bind enhancing agent in extended restructured meat products at an economic cost.

• Food Science of Animal Resources
• /
• v.37 no.2
• /
• pp.313-319
• /
• 2017

This study was conducted to develop calcium-fortified shank bone extract (SBE) and to determine the effect of adding calcium lactate on physico-chemical characteristics of SBE during cold storage. The following five experiment groups were used: Control (0%, no addition), T1 (0.05% calcium lactate), T2 (0.1% calcium lactate), T3 (0.5% calcium lactate), and T4 (1% calcium lactate). When the concentration of calcium lactate added to the SBE was increased, the pH, redness, and yellowness values were significantly reduced, whereas the salinity, sugar content, and turbidity of SBE were significantly increased. Sensory parameters such as aroma, flavor, and overall acceptability in the control, T1, and T2 had similar scores. The TBARS values of SBE was significantly increased when 1% of calcium lactate was added, and the VBN values of SBE with calcium lactate at day 7 were higher than that of control (p<0.05). However, the addition of calcium lactate showed an inhibition effect on the growth of total microbial counts in SBE until 4 d of storage. The calcium content of SBE was increased by the addition of calcium lactate in a dose-dependently manner. The proper addition level of calcium lactate in the SBE was determined to be 0.1%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.252-259
• /
• 2015

The present study was conducted to investigate the efficacy of sweet potato powder (SPP) and water as a fat replacer in low-fat pork patties. Low-fat pork patties were developed by replacing the added fat with combinations of SPP and chilled water. Three different levels of SPP/chilled water viz. 0.5/9.5% (T-1), 1.0/9.0% (T-2), and 1.5/8.5% (T-3) were compared with a control containing 10% animal fat. The quality of low-fat pork patties was evaluated for physico-chemical (pH, emulsion stability, cooking yield, $a_w$), proximate, instrumental colour and textural profile, and sensory attributes. The cooking yield and emulsion stability improved (p<0.05) in all treatments over the control and were highest in T-2. Instrumental texture profile attributes and hardness decreased, whereas cohesiveness increased compared with control, irrespective of SPP level. Dimensional parameters (% gain in height and % decrease in diameter) were better maintained during cooking in the low-fat product than control. The sensory quality attributes juiciness, texture and overall acceptability of T-2 and T-3 were (p<0.05) higher than control. Results concluded that low-fat pork patties with acceptable sensory attributes, improved cooking yield and textural attributes can be successfully developed with the incorporation of a combination of 1.0% SPP and 9.0% chilled water.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.2
• /
• pp.257-262
• /
• 2016

This study was conducted to compare the physicochemical traits of dry-cured hams made from two different three-way crossbred pigs: Yorkshire${\times}$Landrace${\times}$Duroc (YLD) and Yorkshire${\times}$Berkshire${\times}$Duroc (YBD). Animals were slaughtered at a live weight of 110 to 120 kg and cooled at $0^{\circ}C$ for 24 h in a chilling room, the ham portion of the carcasses were cut and processed by dry-curing for physico-chemical analyses. While the moisture and crude protein contents of dry-cured ham were higher in YLD than in YBD, crude fat and ash content were higher in YBD (p<0.05). The salt contents of ham from YBD were higher than those from YLD (p<0.05). YBD ham samples showed a higher $L^*$ and $b^*$ values than those from YLD, while YBD ham showed lower $a^*$ value (p<0.05). Thiobarbituric acid reactive substances (TBARS) and volatile basic nitrogen (VBN) values of YLD hams were lower than those of YBD samples (p<0.05). Hardness, gumminess, chewiness, and shear force values of YBD ham were higher than those of YLD sample (p<0.05). Saltiness was significantly higher in YBD ham than in YLD samples (p<0.05). YLD ham displayed a superior quality than YBD. Considering the meat quality parameters of two-way crossbred ham, YLD hams could be more suitable for the production of dry-cured products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1380-1385
• /
• 2010

Buffalo meat patties with two fat levels, F1 (15% added fat) and F2 (5% added fat and 3% tapioca starch), were cooked in a pre-heated hot air oven (HO) at $175{\pm}2^{\circ}C$ for 15 min, in a microwave oven (MO) for 70 sec and by pressure cooking (PC) at 15 psi pressure for 10 min. and compared for physico-chemical, processing, sensory and microbiological quality attributes. F2 had significantly (p<0.05) higher value for the moisture and moisture protein ratio than F1. However, MO and PC patties had significantly (p<0.05) higher moisture content than HO-cooked buffalo meat patties irrespective of fat content. Highest fat percentage was in MO patties while the minimum was in PC patties. Moisture and fat retention and cooking yield were highest in MO patties irrespective of added fat content in the formulation. Cooking yield and dimensional parameters were better maintained in F2 than F1. Sensory scores viz. appearance and color, flavour, juiciness and texture for HO patties were better than other cooking methods. Sensory panelists rated overall acceptability of HO patties very good to excellent, whereas PC and MO patties were rated as good to very good irrespective of fat content. Microbiological quality was comparable in both groups irrespective of cooking methods used.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.509-515
• /
• 2017

Quartz is the most abundant mineral in the Earth's continental crust. Therefore, understanding of quartz dissolution and precipitation is very important to know about weathering processes and interactions between rocks and water in hydrothermal and metamorphic environments. This paper presents a basic review on the research about quartz dissolution mechanism under various physico-chemical conditions. We rearranged the relationship between each physico-chemical factor and dissolution mechanism from the results of previous researchers in this paper. From this result, we understood that quartz dissolution and precipitation are affected by each factor such as temperature, pH, and applied stress conditions at contact point. In particular, we recognized that the high pH and temperature conditions have different anion concentrations on mineral's surface. As a result, high pH and temperature conditions have a better effect than applied stress condition to the quartz dissolution mechanism.

• Advances in environmental research
• /
• v.5 no.3
• /
• pp.201-211
• /
• 2016

Laboratory tests were conducted to evaluate the performance of waste rubber shreds in leachate collection layer of engineered landfills. The study found that waste rubber shreds layer in combination with a gravel layer can be of potential use in landfill drainage system. To study the performance, conventional gravel along with waste rubber shreds were used in different combinations (with total layer thickness = 500 mm) as leachate collection media. For the laboratory study poly vinyl chloride (PVC) pipes were used. The size range of waste rubber shreds used were 25 mm to 75 mm in length and width = 10 to 20 mm. The gravel size used in the leachate collection media is 10 mm to 20 mm size. Performance study of 7 Test Cols. with different combinations of waste rubber shreds and gravel bed thickness were studied to find out the best combination. The study found that the Test Col.-3 having waste rubber shreds thickness = 200 mm and gravel layer thickness = 300 mm gave the best results in terms of percentage removal in various physicochemical parameters present in the leachate. Further to find the best size rubber shreds three more Test Cols - 8, 9 and 10 were constructed having the rubber shreds and gravel layer ratio same as that of Test Col.-3 but having rubber shreds width = 10 mm, 15 mm and 20 mm respectively. Based on the results obtained using Test Cols. 8, 9 and 10 the study found that smaller size rubber shreds gave bests results in terms of improvement in various leachate parameters.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.33-39
• /
• 2004

In order to vitrify the W1 waste (ion-exchange resin(IER), zeolite, and dry active waste(DAW)) generated from Korean Nuclear Power Plants, a glass formulation development based on waste compositions and production rates was performed. A aluminoborosilicate glass, AG8W1, was formulated to vitrify the W1 waste in an induction cold crucible melter(CCM). The processability, product performance, and economics of the candidate glass were calculated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product quality of the glass such as chemical durability, phase stability, etc. was satisfactory. The vitrification process using the candidate glass was also evaluated to be operated as economically as possible.

• Korean Journal of Microbiology
• /
• v.33 no.4
• /
• pp.267-273
• /
• 1997

Various physico-chemical and microbiological parameters of a composting system were compared with respect to their potential use for the monitoring and evaluation of composting processes for cattle manure. The temperature changed within a range of $30-65^{\circ}C$ during the whole composting process, and the period of active composting (>$40^{\circ}C$) persisted for 16 days. The concentrations of total carbon, total nitrogen, and organic matter decreased by 15% during active composting, but significant changes in C/N ratio were not observed. The decrease of temperature in the latter period of active composting caused a decrease of $NH_4^+-N$ and an increase of $NO_3^--N$ in the composting pile. When temperature exceeded $50^{\circ}C$, the population of thermophiles was higher than that of mesophiles by more than 1 or 2 orders of magnitude. Correlation analyses showed that amylase activity correlated positively with the population of mesophiles and reducing sugar content, but negatively with the population of thermophiles. Amylase activity was higher at the beginning of active composting, whereas cellulase, xylanase and ligninase activities which showed close relationship with each other, increased continually during active cornposting, suggesting the distinction of temporal niches between amylose-degrading and lignocellulose-degrading bacteria in the same habitat.