• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.172-175
• /
• 2003

The regression equations of dry weight of planktonic biomass upon physico-chemical characteristics of fifteen ponds in three replicates under the influence of artificial feed, broiler manure, buffalo manure, N:P:K (25:25:0) and a control pond was obtained after one year of experimental period by using stepwise regression method. Water samples from each of the ponds were analyzed daily. However, the average values were calculated on the basis of 15 day intervals designated as fortnight. In artificial feed supplemented pond the regression of average nitrates on dry weight of planktonic biomass accounted for 71.7% of the variation in biomass. In broiler manure fertilization pond the regression of total nitrogen on dry weight of planktonic biomass held it responsible for more than 74.6% of variation in biomass. In buffalo's manure fertilized pond more than 82% of the variations in biomass were due to total nitrogen. In case of N:P:K (25:25:0) treated pond 66% of the variation in the dry weight of planktonic biomass was due to average nitrates. The control pond showed the dependence of biomass on light penetration. This equation explained more than 62 percent of variation in biomass. Other variables also showed some contribution towards variation in biomass under all the treatments in these regression studies.

• Journal of Korean Society on Water Environment
• /
• v.29 no.3
• /
• pp.428-437
• /
• 2013

Physico-chemical water quality parameters and the phytoplankton communities from 12 sites in Oship-stream, Songchunstream, and Namdae-stream, located Gyeongsangbukdo Uljin-gun, Yeongdeok-gun, and Pyeonghae-eup respectively, were investigated from April 2009 to February 2010. Oship-stream, which is an open estuary, was easily affected by ocean current compared to that of Songchun-stream and Namdae-stream. OS3 and OS4 conductivity was higher with a season average of 3,397 ${\mu}s/cm$. The streams were mesotrophic to hypertrophic. Biological oxygen demand (BOD) was about 3mg/L, which was level 2 on the water quality ratings, but a concentration of 5mg/L in April 2009 indicated increased pollution due to drought. A total of 118, 117, and 124 phytoplankton taxa were found in Oship-stream, Songchun-stream, and Namdae-stream, respectively. The apparent dominant species in the polluted waters included Cryptomonas ovata, Fragilaria construens var. venter, Oscillatoria limnetica, O. limosa, and Phormidium tenue. All of Oship-stream, SC2 and SC4 of Songchun-stream, and ND3 of Namdae-stream were eutrophic as a result of standing crop analysis. BOD was highly correlated with chlorophyll-a content(r=0.52). Phosphorus concentration and proliferation of phytoplankton were thought to most affect BOD concentration in all three streams.

• Geomechanics and Engineering
• /
• v.1 no.4
• /
• pp.291-306
• /
• 2009

One-dimensional soil-column studies were carried out to understand the interaction of three industrial effluents namely amino acid ('highly acidic'), surfactant ('highly organic') and pharmaceutical ('organic and toxic') on the physicochemical behavior, index properties and shear strength of bentonite due to artificial contamination extending to nearly 300 days. Changes in inorganic and organic pollutants present in the effluents due to the interaction of the above effluents and soil were assessed to understand the physico-chemical behaviour. Batch and continuous modes of operation, 8 hrs and 16 hrs Hydraulic Retention Time [HRT] and 25%, 50% concentrations of effluents, were the parameters considered. Amino acid, surfactant and pharmaceutical effluents have shown a high variation in pH (7 to 8) after artificial contamination on bentonite that is their original characteristics of the above effluents have been completely reversed. Further, it is found that the shear strength of bentonite has reduced by about 20%, and with respect to liquid limit and plastic limit shows an increasing trend with time within the period of contamination.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.761-770
• /
• 2005

Scanning electron microscopy / energy dispersive X-ray analyzer(SEM/EDX) has played an important role for evaluation the source of atmospheric particle because it is a powerful tool for characterizing individual particles. The SEM/EDX system provides various physical parameters like optical diameter, as well as chemical information for a particle-by-particle basis. The purpose of the study was to classify individual particle emitted from the point sources based on clustering analysis and physico-chemical analysis by SEM/EDX. The total of 490 individual particle were analyzed at 8 point sources including coal-fired power plant, incinerator, H-C oil boiler, and metal manufacturing industry. The main components were Si and AI in the coal-fired power plant, Cl and Na in the domestic waste Incinerator, S in the H-C oil boiler and S and Fe in the metal manufactory industry, respectively.

• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.128-136
• /
• 2008

An attempt was made in the Veeranam freshwater lake with the objectives to collect, identify, describe and document the algae occurring from March 2007 to August 2007. Qualitative and quantitative characterization of phytoplankton and analysis of physico-chemical parameters of water samples were carried out at monthly intervals during the study period in the western and eastern sides of the lake. It was found that the phytoplankton community embraced 68 genera belonging to four classes viz., Bacillariophyceae (40), Chlorophyceae (22), Cynophyceae (4) and Euglenophyceae (2). There were significant influences of various physico-chemical parameters on the phytoplankton population density. Commonly occurred genera, Oscillatoria (Cyanophyceae), Navicula (Bacillariophyceae) and Scenedesmus (Chlorophyceae), were subjected to energy dispersive spectroscopic analysis (EDS). They were found to accumulate different elements such as Zn, P, S, Ca, Mg, Fe, N, Si, Cl and Mn. Among these the member Cyanophyceae contained Zn, P, Mg, Ca, Mn, S and N. Bacillariophyceae Si, Zn, Mg, Cl, N, Fe, and Ca. Chlorophyceae Ca, Mg, N, Fe, Cl, Zn, Si and Mn. Thus these observations would determine the chemical dialogue between the cell structures and role of the elements. Further, it gives the clue about the phytoplankton growth requirements.

• Journal of the Mineralogical Society of Korea
• /
• v.1 no.1
• /
• pp.32-39
• /
• 1988

The effect of soil forming factors on the pedogenesis of basaltic volcanic ash soils and the influence of allophane material on soil properties have been investigated on 5 chronosequence soils situated from at the near sea coast up to the foot slope of Mt. Halla in Jeju Island. Time seems to be the important soil forming factor which today differentiates soil of the Island. Songag and Donghong soils developed in lower elevations are older and somewhat less influenced by ash shower. However, soils developed at higher elevations, Pyeongdae and Heugag, are rather younger and strongly influence by the ash. It is also proved that the parent materials are very heterogeneous. They mainly are basaltic with some contamination of acidic volcanic ashes and continental aeolian deposits where a considerable amount of quartz encountered in most soils studied. Many physico-chemical properties of soil, such NaF pH, phosphate sorption power, pH and extractable acidity are parameters to differentiate andepts and non-andeptic soils.

• Advances in concrete construction
• /
• v.9 no.1
• /
• pp.9-22
• /
• 2020

The present work looks at the possibilities of recycling more than once demolished concrete as coarse aggregates, to produce new concrete. Different concrete mixes were made with substitutions of 50%, 75% and 100% of recycled concrete aggregates respectively as coarse aggregates. The physico-mechanical characterization tests carried out on the recycled concrete aggregates revealed that they are suitable for use in obtaining a structural concrete. The resulting concrete materials had rheological parameters, compressive strengths and tensile strengths very slightly lower than those of the original concrete even when 100% of two cycles recycled concrete aggregates were used. The durability of the recycled aggregates concrete was assessed through water permeability, water absorption and chemical attacks. The obtained concretes were thought fit for use as structural materials. A linear regression was developed between the strength of the material and the number of cycles of concrete recycling to anticipate the strength of the recycled aggregates concrete. From the results, it appear clear that recycling demolished concrete represents a valuable resource for aggregates supply to the concrete industry and a the same time plays a key role in meeting the challenge for a sustainable development.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.18-24
• /
• 2013

The influences of various operating parameters on physico-chemical techniques were evaluated to remediate petroleum-contaminated sandy soil including S/L ratio, kinetic, and effect of soil particle size. The simple extraction using tap water removed only 20.6% of total petroleum hydrocarbon (TPH), and addition of NaOH enhanced the removal of TPH to approximately 30%. To meet the regulation levels, a surfactant, sodium dodecyl sulfate, was added, and the removal of TPH increased to 4 times. Probably, the carbonate minerals affected chemical aging and soprtion of petroleum, which inhibited the extraction of TPH. The soil with smaller particle size contained more TPH, and the removal of TPH was obstructed with smaller particle size. However, NaOH addition increased the removal of TPH in the smaller particles. The physico-chemical properties of soil influenced greatly the removal of petroleum even in sandy soil.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.685-689
• /
• 2017

We studied the removal of zinc ions from synthetic brackish water by an adsorption method using natural Algerian Bentonite (NAB). The effect of the main physico chemical parameters-contact time, pH, temperature, ionic strength, clay weight and initial metal ion concentrations on the removal of $Zn^{+2}$-were investigated. The results showed that equilibrium was attained within 10 min of stirring time. The retention capacity of $Zn^{+2}$ increased with the increase of pH, the adsorbent dose and ionic strength. A modelization study showed that the adsorption follows Langmuir isotherm, while its kinetics was pseudo-second-order. Based on the results, it was concluded that NAB, which is natural and available, could be used as an alternative for the removal of zinc from saline aqueous solutions.

• Journal of Pharmacopuncture
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2017

Objectives: The goal of this study was to characterize Suvarna Bhasma Parada Marit by using the Ayurvedic test parameters, physico-chemical tests, and various instrumentation techniques. Methods: Suvarna Bhasma, an Ayurvedic formulation manufactured as per Bharat Bhaishajya Ratnakar 5/8357 (BBR), has been studied using various instrumentation techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), laser particle size distribution (PSD) analysis, fourier transform infrared spectroscopy (FT-IR), and atomic absorption spectroscopy (AAS), and physico-chemical parameters, such as the loss on drying (LOD), loss on ignition (LOI), and acid insoluble Ash (AIA) were determined. In addition, Ayurvedic tests, such as Rekhapurnatva (enterable in the furrows of the fingers), Varitaratwa (floatable over water), Nirdhoomta (smokeless), Dantagre Kach-Kach (gritty particle feeling between the teeth), were performed. Results: The XRD study showed Suvarna Bhasma to be crystalline in nature and to contain more than 98% gold. The mean size of the gold crystallites was less than 10 microns, and the morphology was globular and irregular. Suvarna Bhasma contains gold as its single and major element, with EDAX and FT-IR spectra showing that it is more than 98% pure gold. The moisture content (LOD) is less than 0.5%, the LOI is less than 2%, and the AIA is not less than 95%. The Ayurvedic tests, as specified above, helped to confirm the quality of Suvarna bhasma prepared as per the text reference (BBR). Conclusion: This chemical characterization of Suvarna Bhasma performed in this study by using modern instrumentation techniques will be helpful in understanding its pharmacological actions and will help in establishing quality protocols and specifications to substantiate the safety, efficacy & quality of Suvarna Bhasma.