• Title/Summary/Keyword: physico-chemical composition

Search Result 229, Processing Time 0.032 seconds

Comparative Study of Fatty Acid Composition and Characterization of Fixed Oil of Four Peanut Varieties Available in Pakistan

  • Akhtar, Hifza;Hamid, Shahnaz;Khan, Javed Iqbal
    • Natural Product Sciences
    • /
    • v.11 no.4
    • /
    • pp.225-228
    • /
    • 2005
  • four varieties of ground nut (Arechis hypogea) were collected from different areas of Pakistan (Tillagang, Gujar khan, Hanoi and Pipplan) from Punjab province. The oils were extracted for the evaluation of lipid. Physico-chemical values of oils were determined like refractive index, peroxide value, unsaponifiable matter, acid value, iodine value, free fatty acid and ester value. The lipid profile as indicated by GLC showed that Palmitic acid ranged from 8.2-8.8%, proportions of oleic acid and linoleic acid varied from 57.8-59.87% and 22.5-24.1% respectively. Gujar khan variety of peanut has higher % age of oil (56.79). The higher yield of oil in this variety is not at the cost of any nutritional quality of peanut oil.

Composition and Structure of Marine Benthic Community Regarding Conditions of Chronic Barbour Pollution

  • Fadeeva, N.P.;Bezverbnaja, I.P.;Tazaki, Kazue;Watanabe, Hiroaki;Fadeev, V.I.
    • Ocean and Polar Research
    • /
    • v.25 no.1
    • /
    • pp.21-30
    • /
    • 2003
  • Seasonal fluctuations of physico-chemical and biological aspects of the environment were studied in Vladivostok harbour (Golden Horn Bay, the East Sea/Sea of Japan). The benthic community structure was described with a focus on size-spectra (bacteria, meio- and macrofauna) related with the chemical environment and chemical fluxes in sediment and to reveal their possible ecological role in the process of bioremediation of the environment. Samples from two sites with different concentrations of heavy metals (Fe, Zn, Cu, Pb, Mn, Cr, Ni Cd, Co) and petroleum hydrocarbon were assessed by a number of methods. These included plate counts of culturable bacteria, observation through a scanning electron (SEM) and transmission electron microscope (TEM). These approaches were complemented with microscopic assessments of the diversity of the benthic community. The specific communities had a limited number of species, tolerant to abnormally high levels of toxic compounds. The dominant species were presented by several sho.1-lived small polychaetes (Capitella capitata) and nematodes (Oncholaimium ramosum). The highest population density was recorded in microbenthos, in various diatoms, various physiological groups of bacteria which participate in biomineralization: marine heterotrophic bacteria, which oxidized oil, black oil in addition to groups resistant to heavy metals. They have the entire set of mechanisms for neutralizing the negative effect of those compounds, forming the detrital food web and biogeochemical circulation of material in sediments, which results in the biological self-recycling of sea basins. Macro- and meiobenthic organisms were more sensitive to a greater extent of $H_2S$ and petroleum hydrocarbons than to metal content, but the within-site rankings were the same as those achieved for microbiological analyses.

Pore-filling anion conducting membranes and their cell performance for a solid alkaline fuel cell (세공충진 음이온 전도성막의 제조 및 이를 이용한 고체알칼리 연료전지 성능 평가)

  • Choi, Youngwoo;Lee, Misoon;Park, Gugon;Yim, Sungdae;Yang, Taehyun;Kim, Changsoo
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.129.2-129.2
    • /
    • 2010
  • AEM which were used for solid alkaline fuel cell(SAFC) were prepared by photo polymerization in method pore-filling with various quaternary ammonium cationic monomers and crosslinkers without an amination process. Their specific thermal and chemical properties were characterized through various analyses and the physico-chemical properties of the prepared electrolyte membranes such as swelling behavior, ion exchange capacity and ionic conductivity were also investigated in correlation with the electrolyte composition. The polymer electrolyte membranes prepared in this study have a very wide hydroxyl ion conductivity range of 0.01 - 0.45S/cm depending on the composition ratio of the electrolyte monomer and crosslinking agent used for polymerization. However, the hydroxyl ion conductivity of the membranes was relatively higher at the whole cases than those of commercial products such as A201 membrane of Tokuyama. These pore-filling membranes have also excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lowest electrolyte crossover through the membranes, and easier preparation process compared of traditional cast membranes. The prepared membranes were then applied to solid alkaline fuel cell and it was found comparable fuel cell performance to A201 membrane of Tokuyama.

  • PDF

Studies on Chemical Composition, Amino Acid, Minerals of Venison (사슴육의 일반성분,아미노산,무기질 함량에 관한 연구)

  • 박창일;김영직;김영길;김덕진;유춘발;안종호
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.10 no.3
    • /
    • pp.222-228
    • /
    • 2000
  • The experiment was conducted to investigate the physico-chemical characteristics of vacuum and aerobically packed meat from Elk deer weighing 170 $\pm$ 10kg of 28 to 30 months old, chilled at 4$^{\circ}C$for 10days. The moisture content, crude protein, crude fat and crude ash in deer loin were 74.46%, 22.11%, 1.27% and 1.13%: the leg parts had 75.47%, 22.68%, 1.58% and 1.27%, respectively. The decrease in moisture content was greater in aerobic packaging than in vacuum packaging. The lysine content of loin and leg parts were 2,380mg% and 2,270mg% and the glutamate content of loin and leg parts were 4,145mg% and 3,987.5mg% respectively. On the whole, the loin contained more amino acids than leg part. Of the mineral contents, phosphorus, potassium and sodium were present in large amounts and mineral content was decreased with longer chilling period. The leg parts contained more potassium, sodium, phosphorus, zinc, magnesium and calcium than loin parts. In conclusion, vacuum packaging is considered more advantageous in preventing meat color change and microbial deterioration for consumers interest.

  • PDF

Polymer brush: a promising grafting approach to scaffolds for tissue engineering

  • Kim, Woonjung;Jung, Jongjin
    • BMB Reports
    • /
    • v.49 no.12
    • /
    • pp.655-661
    • /
    • 2016
  • Polymer brush is a soft material unit tethered covalently on the surface of scaffolds. It can induce functional and structural modification of a substrate's properties. Such surface coating approach has attracted special attentions in the fields of stem cell biology, tissue engineering, and regenerative medicine due to facile fabrication, usability of various polymers, extracellular matrix (ECM)-like structural features, and in vivo stability. Here, we summarized polymer brush-based grafting approaches comparing self-assembled monolayer (SAM)-based coating method, in addition to physico-chemical characterization techniques for surfaces such as wettability, stiffness/elasticity, roughness, and chemical composition that can affect cell adhesion, differentiation, and proliferation. We also reviewed recent advancements in cell biological applications of polymer brushes by focusing on stem cell differentiation and 3D supports/implants for tissue formation. Understanding cell behaviors on polymer brushes in the scale of nanometer length can contribute to systematic understandings of cellular responses at the interface of polymers and scaffolds and their simultaneous effects on cell behaviors for promising platform designs.

A Study on the Geological Occurrence, the Mineralogical and Physico-Chemical Properties of the Yucheon Sericite Ore in Chungha Area, Kyungsangbuk-do (청하지역 유천 견운모의 산상 및 물성)

  • 이동진
    • Journal of the Mineralogical Society of Korea
    • /
    • v.10 no.2
    • /
    • pp.114-125
    • /
    • 1997
  • The purpose of this study is to clarify the geological occurrence, mineralogical, physico-chemical and thermal properties of the sericite ore which located in Chungha area, Kyungsangbuk-do. The geology of this area are composed mainly of hornfels and some felsite porphyry. The sericitic ore is classified into sericite, sericite-quartz and quartz-sericite ore according to mineral assemblages. Mineral components in sericite ore are mainly sericite with minor quartz, apatite, sphene, zircon, ilmenite, bismuthinite, iron oxide and etc. Sericite-quartz ore are mainly composed of sericite and quartz. Accessary minerals are muscovite, epidote, zircon, sphene, iron oxide and etc. The chemical compositions of K2O, Al2O3, & Ignition loss in sericite and sericite-quartz ore increase than that of the host rock, while the composition of SiO2, Na2O & Fe2O3 decrease. Sericite and sericite-quartz ore are characterized by the specific gravity of 2.35 and 2.44, the pH of 4.36 cP and 2.36 cP respectively. The result of size analyses of sericite ore is 11.3% in grain volume concentration between 12.9 $\mu\textrm{m}$ and 11.1$\mu\textrm{m}$, and 32.3% between 9.6$\mu\textrm{m}$ and 12.9$\mu\textrm{m}$. The thermal expansivity of sericite and sericite-quartz ore show the similar pattern. The sericite ore shows the thermal expansivity of 0.31% at 50$0^{\circ}C$, 0.39~0.75% at 600~1,00$0^{\circ}C$ and 0.74% at 1,10$0^{\circ}C$. The sericite-quartz ore show the thermal expansivity of 0.29% at 50$0^{\circ}C$, 0.36~0.72% at 600~1,000% and 0.71% at 1,10$0^{\circ}C$.

  • PDF

A Study on Physico-chemical Property and Composition of Velvet Antler and Byproducts in Elk. (Elk종의 녹용과 부산물의 이화학적 특성에 관한 연구)

  • 이길왕
    • Journal of Life Science
    • /
    • v.14 no.3
    • /
    • pp.496-500
    • /
    • 2004
  • This study has been performed for physico-chemical property and composition of sinew, testes, tail, blood and velvet antler in Elk. Amino acid contents in the sinew taurine, alanine, histidine, and lysine were high contained, histidine, glutamic acid, taurine, and lysine were high contained in testes, glutamic acid, lysine, alanine, glycine, and phenylalanine were high contained in tail, histidine, glycine, and lysine were high contained in blood, glutamic acid, lysine, taurine, alanine, and glycine were high contained in velvet antler. And, based on the amount of mineral, $K^{+}$, $Ca^{2+}$, and $P^{+}$ were 444.8, 166.6 and 242.9mg per 100g in sinew, respectively. $K^{+}$, $Ca^{2+}$ and $P^{+}$ were 294.4, 330.5, and 514.3 mg per 100g in testes, respectively, $K^{+}$, $Mg^{2+}$, and $P^{+}$ were 1420.6, 118.4, and 1105.2mg per 100 mg in tail, respectively. Fe3+,-K+, and P+ were 344.1, 1023.6 and 157.2 mg per 100 mg in blood, respectively and $K^{+}$, $Ca^{2+}$ and $P^{+}$ were 888.4, l1533.1 and 14722.0 in velvet antler, respectively. Finaly, difference were found in comparison of composition of free mwtal ion (N $a^{+}$, $K^{+}$, $Mg^{2+}$ and $Ca^2$) bwteen blood, tail, tests, sinew and velvet antler, and composition of free metal in blood higher than those othersd higher than those others.

Studies for the osmotic parameter of liposomes

  • Yu, Byung-Sul;Seo, Weon-Gyo;Jeon, Young-Ho
    • Archives of Pharmacal Research
    • /
    • v.10 no.2
    • /
    • pp.94-99
    • /
    • 1987
  • By using the former equation (8), we modified the equation which can show the dissimilar osmotic behavior of liposome with composition change. The slope of the new equation was presented as the ratio of osmotically active volume (V$_{act}$= ) to the total volume (V$_{totel}$= $_{acl}$+ V$_{dead}$ ; V$_{dead}$ is osmotically inactive volume) of loposomes, we defined is as a Z-value, which can elucidate the dissimilarity of the osmotic activity of multilamellar liposomes with the change of phospholipid composition and the differences of physicochemical properties of liposomes. Z-value was applied for studying the physico-chemical properties of liposomal membrane. The factor that affects on the Z-value was not the lipid concentration of liposome stock dispersion but the lipid composition of liposomal membrane. As the content of dicetylphosphate, the negative charged phospholipid, was increased, the osmotic activity, represented by Z-value, of multilamellar liposome was decreased. Using the hypertonic conditions (shrinking region), Z-value steadily increased and reached a maximum at 10 mole percent cholesterol with increasing the cholesterol content.

  • PDF

NIR - a Tool for Evaluation of Milling Procedure

  • Gergely, Sziveszter;Handzel, Lidia;Zoltan, Andrea;Salgo, Andras
    • Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
    • /
    • 2001.06a
    • /
    • pp.1125-1125
    • /
    • 2001
  • Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

  • PDF

Analysis of Structure and Physical and Chemical Properties of the Carbonized Pine Wood (Pinus densiflora S. et Z) Powder (I) - Elemental Analysis, SEM, N2 Adsorption-desorption- (가열처리 및 탄화처리 소나무재(Pinus densiflora) 목분의 구조 및 물리·화학적 특성(I) - 원소 분석, SEM, 질소 흡착-탈착 실험 -)

  • Lee, In-Ja;Lee, Won-Hee
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.44-51
    • /
    • 2008
  • In this study, the effects of carbonization temperature on the physico-chemical properties of Korean red-pine wood (Pinus densiflora S. et Z.) powder charcoal are studied by elemental analysis, nitrogen adsorption-desorption and SEM techniques. The surface structure and physico-chemical properties of the wood charcoal greatly depend on the carbonization temperature and their temperature dependences for sapwood (swd) and heartwood (hwd) are qualitatively analogous. Because of the differences in characteristics such as hardness and composition between heartwood and sapwood, charcoals from heartwood have larger specific surface area and smaller average pore diameter than that from sapwood. Because the decomposition reaction mostly proceeds in the precarbonization stage, the charcoal produced in this stage mainly consists of carbon. The second carbonization reaction is insignificant but still proceeds up to $700^{\circ}C$, and the specific surface area continuously increases. Above $800^{\circ}C$, the surface area is reduced by the pore-filling and narrowing effects and especially above $900^{\circ}C$, new carbon phase with hexagonal column rooted into the pore is formed. The nitrogen adsorption-desorption isotherm of the charcoal is classified as type I and its hysteresis loop was as type H4.