• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.320-326
• /
• 1997

In order to elucidate the degradation characteristics of the herbicide imazapyr in soil, mineralization to $^{14}CO_2$and adsorption were investigated using eight types of soils with the different physico-chemical properties. The results obtained were as follows: 1. During the incubation period of 12 weeks after the treatment of imazapyr, the amounts of $^{14}CO_2$ evolved from 8 types of soils with different properties ranged from 1.5 to 4.9% of the originally applied $^{14}C$ activities. Soil C, G, and H with low pH and high organic matter showed low $^{14}CO_2$evolution, whereas soil B and D with high pH and low organic matter did high $^{14}CO_2$ evolution. 2. Time for reaching the equilibrium concentrations in the adsorption experiment of imazapyr in soils was about 3 hours at $25^{\circ}c$ in soil C, D, G, and H. Imazapyr was adsorbed in the range of 0.25${\sim}$28.32% in soils with different physico-chemical properties. Among the soil parameters, organic matter content was the most influential in imazapyr adsorption on soil. The Freundlich adsorption coefficient $(K_f)$ increased 5.5 to 25.6 times as organic matter content increased 2.0 to 21.3 times. Hence it seems that the extent to which soil organic matter contributes to imazapyr adsorption is greater than that of clay mineral. $K_f$ values for the soils tested were 0.44, 0.08, 0.65, and 2.05 in soil C, D, G, and H, respectively. In all the soils tested, $K_f$ values had a strong resemblance to K_$K_d$.

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.127-137
• /
• 1997

Bentonites that are used currently for the civil engineering puppose in our country were investigated to reveal their physico-chemical properties such as viscosity, swelling volume, cation exchange capacity (CEC) and chemical composition, and to compare the content of their constituting minerals and their characteristics using the X-ray diffraction and infrared spectrum methods. The content of montmorillonite in the hentonites ranges from 50 to 79%. As the content of montmorillonite in the hentonites increases, the viscosity, swelling volume, water content, methylene blue adsorption, CEC, and the amount of clay-size particles tend to increase in general. Because these properties also show good correlation within them, the results can he used to infer the characteristics of hentonites indirectly. However, a few samples do not show this correlation hetween the properties. This is probably due to the characteristics of constituting minerals of raw ore and manufacturing process. A saraple with lowest content of rnontrnofiiionite was shown to be inferior in the physico-chemical properties that are needed for the civil engineering-purpose bentonites.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.124-134
• /
• 2013

The authentication of the physico-chemical properties of ginsenosides reference materials as well as qualitative and quantitative batch analytical data based on validated analytical procedures is a prerequisite for certifying good manufacturing practice (GMP). Ginsenoside Rb1 and Rg1, representing protopanaxadiol and protopanaxatriol ginsenosides, respectively, are accepted as marker substances in quality control standards worldwide. However, the current analytical methods for these two compounds recommended by Korean, Chinese, European, and Japanese pharmacopoeia do not apply to red ginseng preparations, particularly the extract, because of the relatively low content of the two agents in red ginseng compared to white ginseng. In manufacturing fresh ginseng into red ginseng products, ginseng roots are exposed to a high temperature for many hours, and the naturally occurring ginsenoside Rb1 and Rg1 are converted to artifact ginsenosides such as Rg3, Rg5, Rh1, and Rh2 during the heating process. The analysis of ginsenosides in commercially available ginseng products in Korea led us to propose the inclusion of the (20S)- and (20R)-ginsenoside Rg3, including ginsenoside Rb1 and Rg1, as additional reference materials for ginseng preparations. (20S)- and (20R)-ginsenoside Rg3 were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of those isolated ginsenosides was achieved according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantification, and mass balance tests. The isolated ginsenosides showed 100% purity when determined by the three HPLC systems. Also, the water content was found to be 0.534% for (20S)-Rg3 and 0.920% for (20R)-Rg3, meaning that the net mass balances for (20S)-Rg3 and (20R)-Rg3 were 99.466% and 99.080%, respectively. From these results, we could assess and propose a full spectrum of physico-chemical properties of (20S)- and (20R)-ginsenoside Rg3 as standard reference materials for GMP-based quality control.

• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.66-75
• /
• 1993

Dental abrasive, dicalcium phosphate dehydrate (DCPD) was prepared and the several important factors affecting on the quality of toothpaste were investigated by means of set test, glycerine absorption, Coulter counter test, color difference, BET adsorption, mercury porosimetery, and rheogram comparing with two foreign DCPDs, MFO4 and Dentphos K. Sample DCPD was prepared by reaction between 85% H$_{3}$PO$_{4}$ and 15% milk of lime at $39^{\circ}C$ (pH6.5), and stabilized with TSPP and TMP. The physicochemical properties of Sample DCPD were obtained as follows: whiteness (98.99), average particle size (15.5 $\mu\textrm{m}$), pH (7.9), remainder particle weight (0.49w/w%), glycerine absorption value (64 ml), and set test (passed). N$_{2}$ adsorption curves (BET) of three kinds of DCPD showed non-porous type III isotherm. BET adsorption parameters of sample DCPD showed that surface area was 24.9 m$^{2}$/g, total pore volume 0.09 cm$^{3}$/g and average pore radius 72.0 $\AA$. The rheogram of the toothpaste containing each DCPD showed bulged plastic flow with yield vlaue and thixotropic behavior. These results meet standard requirements as abrasive standard, and suggested that synthesized sample DCPD could be used a dental abrasive such as a high quality grade in practice as foreign DCPDs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.241-245
• /
• 1988

The characteristics of some hillside soils in Yeongnam area were investigated to obtain the basic informations for reclamation. Some physico-chemical properties of the soils were discussed with erodibility factor (K) and aggregate stability. The domain clay mineral of soils was identified as Kaoline. Their exchangeable AI, Fe contents were high, and phosphate adsorption coefficients were ranged from 246 to 551 p mg/100g. The improvement of their physico-chemical properties is required in advance to reclaim at those soils.

• Journal of Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.28-35
• /
• 2008

The physico-chemical properties of kapok fibers were altered via the combination processes of chlorite-periodate oxidation, in order to assess their efficacy as a heavy metal adsorbent. The chemically-oxidized kapok fibers were found to harbor a certain amount of polysaccharides, together with lowered lignin content. This alteration in lignin characteristics was clearly confirmed via FTIR and NBO yield. Moreover, chemically oxidized kapok fibers retained their hollow tube shape, although some changes were noted. The chemically oxidized kapok fibers evidenced elevated ability to adsorb heavy metal ions with the best fit for the Langmuir adsorption isotherm model. Three cycles of adsorption-desorption were conducted with in-between regeneration steps. Our experimental results indicated that chemically oxidized kapok fibers possessed excellent adsorption characteristics, and the modified kapok fibers could be completely regenerated with almost equimolar diluted sodium hydroxide. Pb, Cu, Cd and Zn ions evidenced adsorption rates of 93.55%, 91.83%, 89.75%, and 92.85% on the chemically oxidized kapok fibers. The regeneration efficiency showed 73.58% of Pb, 71.55% of Cu, 66.87% of Cd, and 75.00% of Zn for 3rd cycle with 0.0125N NaOH.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.107-113
• /
• 2010

In this study, the adsorption reactions in the binary component system such as kaolinite-humic acid, kaolinite-americium and humic acid-americium were investigated. After performing the basic physico-chemical properties of the kaolinite, the adsorption reactions of the humic acid on the kaolinite were carried out with varying concentration of humic acid and ion strength, and pH. With increasing HA concentration and pH, the sorption of HA onto KA decreased, while the sorption of HA onto KA increased with increasing ionic stre ngth. Also, with varying pH, the adsorption reactions of the americium-kaolinite and americium-humic acid were studied. In the acid and neutral region, Am easily adsorbed on the HA, while the sorption of Am on the HA in the alkali region decreased because of electrostatic repulsion. The results from these studies make it possible to understand the characteristics of adsorption behaviour of the americium by the humic acid in the water environment.

• Applied Biological Chemistry
• /
• v.15 no.3
• /
• pp.229-240
• /
• 1972

Not only in order to determine reasonable application amounts of PCP in terms of soil texture, but also to get basic data for fish-toxicity-free treatment by estimating fish toxicity, some aspects of PCP adsorption were observed taking various paddy soils with different physico-chemical characteristics in the Choongbook Area as samples. The results obtained are summarized as follows: 1. There was a positive correlation between PCP adsorption and clay contents, total nitrogen, organic matter, cation exchange capacity, exchangeable bases, and phosphorus absorption coefficients, respectively; whereas there was a negative one between PCP adsorption and pH. Although they were not significant, it was remarkable that there was a relatively large amount of correlation between PCP adsorption and clay contents, $H^+,\;Mg^{++}$, and CEC, respectively. 2. PCP adsorption in terms of soil texture was in the order of Clay>Loam>Sandy loam. 3. Although PCP adsorption in the $H_2O_2-treated$ soils decreased remarkably, it was not proportional to the humus contents. 4. The order of PCP adsorption in the exchangeable base-treated soils was H^+-exchanged soil>$K^+-soil$>$Na^+-soil$>$Ca^{++}-soil$>Mg^{++}-soil. 5. Langmuir's and Freundlich's adsorption isotherms were applicable to the PCP adsorption, and thereby were able to be calculated maximum adsortion amounts of PCP, bond energy, and the depths of adsorption layers. 6. Maximum adsorbed amounts of PCP were 212.14 mg/100gr in Clayey loam, 97.28 to 121.59mg/100gr in Loam, and 32.92 to 91.74mg/100gr in Sandy loam, respectively. 7. The depths of mixed layers of limiting application for fish-toxicity-free treatment were 0.88cm of the Jinchun soil, the shallowest and 4.29 cm of the Naesan-ri Sandy loam, the deepest.

• Carbon letters
• /
• v.21
• /
• pp.81-85
• /
• 2017

The objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at $900^{\circ}C$. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3535-3541
• /
• 2014

Bisphenol A is considered as pollutant, because it is toxic and hazardous to living organisms even at very low concentrations. Biological oxidation used for removing this organic from waste water is not suitable and consequently application of catalytic wet oxidation has been considered as one of the best options for treating bisphenol A. We have developed Fe/SBA-15, Ni/SBA-15 and Fe-Ni/SBA-15 as heterogeneous catalysts using the advanced impregnation method for oxidation of bisphenol A in water. The catalysts were characterized with physico-chemical characterization methods such as, powder X-ray diffraction (PXRD), FT-IR measurements, N2 adsorption-desorption isotherm, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. This work illustrates activity of the catalysts for heterogeneous catalytic degradation reaction revealed with excellent conversion and recyclability. The degradation products identified were not persistent pollutants. GC-MS analysis identified the products: 2,4-hexadienedioic acid, 2,4-pentadienic acid and isopropanol or acetic acid. The leachability study indicated that the catalysts release very little metals to water. Therefore, the possibility of water contamination through metal leaching was almost negligible.